TECHNICAL DOCUMENT
IMPORTANT! Please read this section before you begin installing your Automatic Tool Changer (ATC).
lPower Drawbar Install the Power Drawbar on your machine before installing the ATC. If you have a
Power Drawbar button, don't install it: the button's functionality is replaced by the ATC.
lPathPilot You must update your controller to the latest version of PathPilot before installing and
operating the ATC. If you don't, there's a risk that the ATC could become inoperable. Follow the
instructions detailed in "Before You Begin" (on the next page).
PURPOSE
This document gives instructions on installing and using an Automatic Tool Changer (ATC)for PCNC 1100 Series 3.
PRODUCT INFORMATION
Product: Automatic Tool Changer (ATC)for PCNC 1100 Series 3 (PN39009)
The Automatic Tool Changer (ATC) holds up to 10 tools in a single tray. If your program requires more tools, the
ATC changes tools automatically for all tools assigned to the tray, and pauses for a manual tool change for all tools
not assigned to the tray.
Automatic Tool Changer (ATC)for 770M
Quantity Description
1 ATCAssembly
3 Fixed Standoff Assembly (PN35832)
10 Plastic Screw (PN32173)
1 Tilt Standoff Assembly (PN35911)
MMachine ATC Retrofit for PCNC 770 Series 3 (PN39006)
Quantity Description
3 5/16-18 × 3/4 Socket Head Cap Screw (PN39010)
3 M8 × 1.25 - 20 Socket Head Cap Screw (PN39307)
1 ATCLegacy Adapter Cable (PN38661)
1Coolant Hose Bracket Kit for PCNC 770 (PN 37259)
1 MMachine ATC Carousel Plate Spacer (PN39005)
Note: If any items are missing, we can help. Email support@tormach.com to contact Tormach Technical
Support for guidance on how to proceed.
Page 2
©Tormach® 2020
Specifications subject to change without notice.
tormach.com
TD10560: Owner's Guide: M ATC Retrofit for PCNC 770 Series 3 (1220A)
