Preventive
Maintenance
The dispensershould be cleaned any time there is heavypaper dust build-up inside the dispenser. If
paper dust is not a problem,
approximately
every year is a good
frequency
for cleanings. The following is
the
recommended
procedureto cleaning:
1) Open the dispenserand removethe remainingtowels.
2) Clean out any paper dust. This can be done is several ways, such as, vacuuming,blowing out with a
can of
compressed
air (wear safetyglasses), wiping out with a damp cloth, etc.
3) Clean the cover with a generalall-purposecleaner that is safe for plastics.
Troubleshooting
Problem: Any
paper-related
problem.
Take note of the date code on the outside of the case of paper product on inside on the TorkSelectlabel.
Then contact the Essity QualityCoordinator and explain the problem.
Problem: Anyother problem not stated above.
•
Contact the EssityQualityCoordinator.
