TOPWAY em Just Wireless 08082 Manuel utilisateur
BLUETOOTH®HEADSET
USERS MANUAL
08082
BEFORE YOU BEGIN TO USE YOUR JUST WIRELESS®
BLUETOOTH®HEADSET, YOU MUST FULLY CHARGE AND PAIR
IT WITH YOUR MOBILE PHONE. PLEASE READ THE ENCLOSED
USERS MANUAL FOR EASY PAIRING INSTRUCTIONS.
SHOULD YOU NEED ASSISTANCE, PLEASE CALL 888-753-6957.
STOP
AND
READ
Thank you for purchasing the Just Wireless Bluetooth®Headset. We hope you enjoy
it. This manual will get you started and help you to get familiar with the features
of your headset. For those individuals with the Bluetooth®Headset, in addition to all
the other features, the unit supports a multipoint function to allow simultaneous
connection of the Bluetooth®Headset with 2 mobile phones. Music play function
headset allows the user to play / hear / listen to music and control the music player.
ABOUT YOUR JUST WIRELESS BLUETOOTH®HEADSET
Your Just Wireless®Bluetooth®Headset lets you do the following functions, provided
your mobile phone can support it:
•Making a call
•Ending a call
•Answering calls
•Adjusting Volume
•Pause / play music
•Next track / previous track control
•Call Waiting
•Rejecting a call
INTRODUCTION
1
5
6
Adjustable
Ear Hook
Main Button
LED Indicator
Microphone
4
Charging
Port
3
2
Volume
Higher
Volume
Lower
7
Earphone
FEATURE DIAGRAM
1LED Indicator Light
a) Blue mode indicates active/standby.
•1 Consecutive Flash: Your Bluetooth®
Headset is connected to your mobile phone.
b) Red mode indicates battery level.
•Flashing Red - Indicates low battery level.
•Solid Red - Indicates your Bluetooth®
Headset is being charged.
• Light Off - The battery is fully charged.
c) Blue/Red Flashing Mode
•Your Bluetooth®Headset is in pairing
mode
Volume Higher +
Volume Lower -
Charging Port
5 Microphone
6
6Adjustable Ear Hook
Earphone
2
3
4
5
7
CHARGING YOUR HEADSET
Your Just Wireless®Bluetooth®Headset comes with a built in rechargeable battery, and must be
fully charged before using. Use the supplied USB Cable to charge your headset by plugging it
into the charging jack shown below.
• The red LED light will ash
when you have a low battery
level. It is suggested to
charge the headset at this time.
•The red light will illuminate solid red during charging and will turn off
when fully charged. It will take approximately 1-2 hours to charge.
•Your headset cannot be used while charging.
GETTING STARTED
TURNING THE HEADSET ON AND OFF
ON Mode: Press and hold down the Main Button for 3 seconds. Your headset voice prompt will
say “Power On” and the blue LED light will ash 1 time. Now your headset is on. Red / blue ashing
means your Bluetooth is now in pairing mode.
OFF Mode: Press and hold down the Main Button for 3 seconds. You headset will sound a tone and
the solid red LED light will turn on. Now your headset is off.
Reset: In power off status, press and hold the power button for 10 seconds until your headphone
powers off again.
Reconnect: In power off status, press and hold the power button for 3 seconds until LED ashes
red / blue alternately. Your headphone will be connected with the last paired device automatically. If
reconnect fails, 5 seconds later will enter pairing mode again automatically.
PAIRING AND CONNECTING YOUR HEADSET TO YOUR MOBILE PHONE
Pairing is a process of linking the Bluetooth®Headset with your mobile phone. Before using your
Bluetooth®Headset, you must successfully pair it to your mobile phone. Your mobile phone must be
Bluetooth®compatible. If it is not, you will not be able to pair the headset to your mobile phone. Check
the users manual of your mobile phone to see if it is Bluetooth®compatible. Your mobile phone and
headset should not be more than 3 feet in distance when pairing.
Step 1 - Setting the headset into pairing mode: In the OFF mode, press and hold down the Main
Button for 3 seconds, until you see the LED light consecutively ashing blue and red. Your Bluetooth®
Headset is now in pairing mode.
Step 2 - Setting the mobile phone into pairing or “discover” mode: Follow your mobile phone’s
instruction manual. Although it is different on all types of mobile phone brands and models, it usually
involves going to the “set up”, “connect” or “Bluetooth®” menu on your mobile phone, and selecting
the option “discover” or “add” a Bluetooth®device.
Step 3 - Completing the pairing: Your mobile phone will search for your Bluetooth®Headset. The
LED indicator light must continue to consecutively ash blue and red while your mobile phone is
searching for your Bluetooth® Headset. If it isn’t ashing blue/red repeat step 1 above. When your
mobile phone nds Bluetooth®Headset, you will need to accept your Bluetooth®Headset by pressing
“Pair”, “Yes” or “OK” on your mobile phone and then conrm using the passkey or PIN number 0000.
The headset and mobile phone are now paired and the LED light on the headset will now ash blue 2
times consecutively and beep twice. You will only have to pair your Bluetooth®Headset to your mobile
phone once. After this process has been completed you can use the Bluetooth®Headset only with its
paired mobile phone. Repeat steps 1-3 if pairing was unsuccessful.
Step 4 - Connecting: Most phones require an additional step to “connect” to a Bluetooth®Headset.
Follow the instructions in your mobile phone users manual. Once connected, your Bluetooth®Headset
blue LED light will ash.
If either the Bluetooth®Headset unit or your mobile phone is turned off, most mobile phones will allow
you to automatically connect back to your Bluetooth®Headset once your headset or mobile phone is
turned back on. However with some mobile phones, you will need to manually reconnect. Your mobile
phone’s users manual will guide you through these set up instructions.
Table des matières
