Topfield SRP-2401CIplus Manuel de service

SRP-2401CI+

User Reference

High Deﬁnition

Digital Satellite Receiver

Personal Video Recorder

Common Interface (CI+)

Default PIN: 0000

The “CI Plus” Logo is a trademark of CI Plus LLP.

Precautions

• Clean with a dry cloth only.

• Do not block any of the ventilation openings.

• When placed in a cabinet, make sure there is a minimum space of 10 centimetres

around it.

• Do not install near any heat sources or in direct sunlight as this will impair

cooling.

• Do not operate this product near water.

• Do not try to change the plug or defeat its safety purpose.

• This product is designed for indoor use only.

• Place the digital receiver on a ﬁrm and level surface.

• Do not lay any objects such as magazines on this unit.

• Do not overload power outlets. Doing so may result in a risk of ﬁre or electrical

shock.

• Never open this unit’s casing under any circumstances, or the warranty will be

void.

• Unplug this unit during lightning storms or when unused for long periods of

time.

• Refer all servicing to qualiﬁed service personnel. Reverse engineering or disas-

sembly is prohibited.

• Batteries, including those which contain no heavy metals, may not be disposed

with other household wastes. Please dispose of used batteries in an environ-

mentally sound manner. Find out the legal regulations which apply in your

area.

• The mains plug shall remain readily operable so that it can be removed easily

to disconnect the power.

• Operate the digital receiver at temperatures between 0 to 45 ◦C.

• The mains voltage must range between 90 and 250 volts. Check it before plug-

ging the digital receiver to the wall socket.

For the power speciﬁcation, refer to the table below.

Input voltage 90 to 250 V AC, 50/60 Hz

Power consumption 60 W at maximum in active

Under 1 W in passive standby

Front Panel

Switch between Standby Mode

Active Mode Decrease/ Increase Volume

Displays the Main Menu Switch to Previous/ Next Service

Displays the Services List

Also used for selecting Menu items

Rear Panel

1LNB 1 IN Satellite broadcasting signal input socket for the ﬁrst tuner

(Current: Max.500mA with overload protection)

2LNB 1 OUT Satellite broadcasting signal output socket through the ﬁrst tuner

3LNB 2 IN Satellite broadcasting signal input socket for the second tuner

4LNB 2 OUT Satellite broadcasting signal output socket through the second tuner

5VIDEO Composite video output socket for the television set

(yellow)

6AUDIO L/R Stereo audio output socket for the television set or the audio-video re-

ceiver (white/red)

7Y/Pb/Pr Component video output socket for the television set

(green/blue/red)

8TV Audio and video output socket for the television set

9VCR Audio and video input/output socketfor another device such as a video

recorder

10 HDMI Audio and video output socket for the high deﬁnition television set

11 eSATA eSATA port for connection to an external hard drive

12 LAN Local area network port

13 USB USB port for ﬁrmware update and data transfer.

(USB 2.0 Host, 5V DC, 500mA Max.)

14 S/PDIF COAXIAL Coaxial-type digital audio output socket for the audio-video receiver

15 S/PDIF OPTICAL Optical-type digital audio output socket for the audio-video receiver

16 ON/OFF Power switch (You have to turn on this switch ﬁrst to use this digital

receiver.)

Connecting the TV

Connect any components before plugging the power cord into the wall outlet. If you encounter

any problems setting up your product, please contact your local retailer.

1. Connect the antenna cable from the satellite dish to the LNB 1 IN con-

nector.

2. Connect the LNB 1 OUT and LNB 2 IN connectors using a loop cable

so that both tuners work properly for recording diﬀerent channels at

the same time.

NOTE

If you have connected both tuners with a loop cable, select the Instal-

lation icon and set the LNB Setting >Connection Type option to Loop

Through; otherwise, set it to Separated.

If you have two antennas without DiSEqC switch, you can connect the

cable from the other antenna directly to the LNB 2 IN connector rather

than using the loop cable.

NOTE

If there are too many antenna devices to be simultaneously supplied

with suﬃcient power for a rather long time through the antenna input

connections, then your antenna may lack power to operate. So it is rec-

ommended to link the LNB 1 OUT connector to the LNB 2 IN connector

with a loop cable, even though the digital receiver is designed to oper-

ate independently over two antennas.

3. Choose a setup that matches the connection ports on your TV.

– We recommend using the HDMI connection for the highest quality HD picture.

– For a higher quality use the component connection.

– For a basic connection to your television use the Scart or composite connection.

• HDMI connection (HDMI)

• Component connection (YPbPr)

• SCART connection (TV)

• Composite connection (VIDEO)

NOTE

When the HDMI cable is connected, the component output becomes disabled. Make sure to

disconnect the HDMI cable from the unit ﬁrst if you want to watch programmes via Composite

connection.

Remote Control

NOTE

The actual images and the number of buttons could be diﬀerent depending on the type of remote

control provided by the manufacturer.

• button switches the digital receiver between standby mode and active mode.

• mutes the sound. Press again to switch it back on.

•







V.Format changes video resolution.

•







A/R changes aspect ratio.

•







AUX switches the output of the TV SCART socket over between the digital receiver and the

device connected to the VCR SCART socket.

• switches over between television services and radio services.

• Numeric buttons are used to enter a service number for service change or to specify values

for menu options.

• switches over between the current service and the previously viewed one.

• displays the service information box. It is also used to display more information about

a programme.

• is used to select an audio track and a sound mode, or a video track of multifeed pro-

gramme.

• displays teletext.

• is used to select a subtitle track.

• is used to set a sleep timer in 10 minute increments.

•







MENU displays the main menu. It is also used to return to the previous menu from a sub-

menu.

•







GUIDE displays the electronic programme guide.

•

allow you to choose an item from the menu. They are also used to navigate through

the electronic programme guide, and in interactive services.

•

allow you to change the options for a menu item. They are also used to navigate

through the electronic programme guide, and in interactive services.

•







OK displays the services list. It is also used to select a menu item.

•







EXIT is used to exit a menu or to hide on-screen information.

•







LIST displays the services list. It is also used to select a menu item.

•







V−,







V+buttons decrease or increase the volume.

•







P−,







P+buttons switch to the previous or next service.

• is used to start reverse playback. Subsequent presses increase the rewind speed.

• pauses live television or playback of a recorded programme.

• resumes normal playback speed, or displays the progress bar for navigation on playback

or time-shift. To play a recorded programme, see button .

• is used to start fast forward playback. Subsequent presses increase the playback speed.

• is used to start recording.

• is used to stop playback, to stop recording, or to jump back to live television from time-

shifted television.

• is used to start slow motion playback. Subsequent presses change the playback speed.

• is used to display the list of recorded programmes that are stored in the internal hard

drive.

• has diﬀerent functions per menu.

• is used to jump back to the beginning of the recording on playback.

• is used to jump to the end of the recording on playback.

•







SAT displays the satellites list with their services list.

•







F1 has diﬀerent functions per menu.

•







F2 is used to make a bookmark on playback or time-shift.

•







F3 is used to jump to next bookmark position.

•







F4 is used to edit a recording.

• is not used in this model.

•







FAV displays the favourite lists.

Functions of the colour buttons will be guided on the screen.

Service Search

Conﬁgure LNB, DiSEqC 1.0, and DiSEqC 1.1

You can specify the satellite name and LNB frequency

toward which your antenna is set to face.

Select Installation >LNB Setting

• The DiSEqC 1.0 option allows swtiching between up to

four satellite sources.

• The DiSEqC 1.1 option allows switching between up to

16 satellite sources.

DiSEqC 1.2 settings

Your motorized antenna will turn toward your desired

satellites horizontally by DiSEqC 1.2.

Select Installation >Motorized DiSEqC 1.2

• At ﬁrst you have to set the Motorized DiSEqC 1.2 op-

tion to Enable.

USALS settings

USALS (Universal Satellite Automatic Location Sys-

tem), also known as DiSEqC 1.3, will calculate posi-

tions of visible satellites just by pointing it to a known

satellites.

Select Installation >USALS Setting

• At ﬁrst you have to set the Motorized DiSEqC 1.3 op-

tion to Enable.

Perform a service search

1 Select the Installation >Searching menu.

2 Move down to the Start Search item, and press the









OK button.

3 When the scan is complete, press the 







OK to save the

services list.

* If your providing operator is one of the following, you

are able to use the FastScan feature:

• Canal Digital

• TV VLAANDEREN

• TeleSAT

• AustriaSat

• Skylink / CS Link

Network Setup

You need to set up a network connection to enjoy web-enabled features on this unit.

1 Connect your Ethernet cable from your router to the

digital receiver.

2 Press 







MENU >Installation >Network Setting >IP

Setting.

3 It is recommended to use a dynamic IP address by

the router therefore select DHCP as the connection

type.

However if a static connection is set then please re-

fer to your router for an IP address, Subnet Mask,

Gateway, Primary DNS, Secondary DNS.

4 Scroll down to activate proﬁle and press 







OK on the

remote.

Enjoying Services

Watching live services

Now that the service search is complete, press the 







button to view the services list.

On the services list, press the

button to navigate

your desired service.

You can also switch to your desired service by entering

its service number with the numeric buttons.

To select a service to watch, press the 







OK button.

Viewing EPG

1 Press the 







GUIDE button to display the electronic pro-

gramme guide (EPG).

2 To see detailed information of a desired programme,

put the highlight bar on the programme with the 







V+

or 







V−button and press the button.

3 To switch to another service, press the 







P+or 







P−but-

ton.

Recording and Playback

Instant recording

To instantly record a programme you are watching at

present, press the button.

After a recording has started, pressing the button

again displays a menu like the left ﬁgure, in which you

can set the recording duration.

Autres manuels pour SRP-2401CIplus

Table des matières

Langues :

Autres manuels Topfield Récepteur

Topfield

Topfield TBF-7300 Manuel utilisateur

Topfield

Topfield CBI-2070 Manuel utilisateur

Topfield

Topfield TF 7720 HSIR Manuel utilisateur

Topfield

Topfield TRF-2100 Manuel utilisateur

Topfield

Topfield TF 6000 CR Manuel utilisateur

Topfield

Topfield TF 6000 VI Manuel utilisateur

Topfield

Topfield TF5800PVR Manuel utilisateur

Topfield

Topfield TF6000F Manuel utilisateur

Topfield

Topfield SBI-2050 Manuel utilisateur

Topfield

Topfield CBC-5150 Manuel utilisateur

Topfield

Topfield TF 5000 Fe Manuel utilisateur

Topfield

Topfield TF 5000 Manuel utilisateur

Topfield

Topfield TF-T5000HD PVR Manuel utilisateur

Topfield

Topfield TF 5510 PVR Manuel utilisateur

Topfield

Topfield TF 6000 PVR ES Manuel utilisateur

Topfield

Topfield TF6500F Manuel utilisateur

Topfield

Topfield TF 6100 VI Manuel utilisateur

Topfield

Topfield Digital Satellite Receiver TF 6000 PVR Manuel utilisateur

Topfield

Topfield TF 100 C Manuel utilisateur

Topfield

Topfield TRF-7260 Manuel utilisateur

Topfield

Topfield TF 5000 CI Plus Manuel utilisateur

Topfield

Topfield TF 6000 PVR Manuel utilisateur

Topfield

Topfield TF 6700 IRc Manuel utilisateur

Topfield

Topfield TF 5000 PVRt Masterpiece Manuel utilisateur

Manuels Récepteur populaires d'autres marques

Garmin

Garmin GA 23 Manuel utilisateur

Aiphone

Aiphone PS-12F Manuel utilisateur

IMES

IMES TCS-01CA-PMI Manuel utilisateur

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuel

AMIMON

AMIMON AMN12310 WHDI Manuel utilisateur

Dual

Dual DMCPA79BT Mode d'emploi

Sound Associates

Sound Associates SA652P Manuel utilisateur

Sherwood

Sherwood NewCastle R-772 Manuel utilisateur

Audio

Audio A10-RX Series Manuel utilisateur

AllSee

AllSee PushShare PSRV1.1 Manuel utilisateur

DEMAG

DEMAG DRC-DR D2 Manuel utilisateur

Teleco

Teleco TVRCL868A02 Manuel utilisateur

Bosch

Bosch RF3222E Manuel utilisateur

Kramer

Kramer 631R Manuel utilisateur

Xpress

Xpress xmc10 Manuel utilisateur

JVC

JVC KD-MR1BTS Manuel utilisateur

Omega Engineering

Omega Engineering UWTC-REC3 Manuel utilisateur

e-survey

e-survey E300 Pro Manuel utilisateur