Topcon SL-100 Manuel utilisateur
3,
)NSTALLATIONAND3ETUP'UIDE
POSITIONING SYSTEMS
SL-100
Upgrade Kit
Installation and Setup Guide
Part Number 1000226-01
Rev. A
ECO XXXXXX
©Copyright Topcon Positioning Systems, Inc.
August 2012
All contents in this manual are copyrighted by Topcon. All rights reserved. The information contained herein may not be
used, accessed, copied, stored, displayed, sold, modified, published, distributed, or otherwise reproduced without express
written consent from Topcon.
Terms and Conditions
Thank you for buying this Topcon product. This manual has been prepared to assist you with the installation of the product and its use
is subject to these Terms and Conditions.
Usage and Safety
This product is designed for use by professionals. Always use safety precautions when operating this or any Topcon product.
Copyrights
All information contained in this Manual is the intellectual property of, and copyrighted material of TPS. All rights are reserved. You
may not use, access, copy, store, display, create derivative works of, sell, modify, publish, distribute, or allow any third party access to,
any graphics, content, information or data in this Manual without TPS’ express written consent and may only use such information for
the care and operation of your Product. The information and data in this Manual are a valuable asset of TPS and are developed by the
expenditure of considerable work, time and money, and are the result of original selection, coordination and arrangement by TPS.
Trademarks
3DMC, SL-100, MC-R3, GX-60, Topcon, and Topcon Positioning Systems are trademarks or registered trademarks of TPS.
Other product and company names mentioned herein may be trademarks of their respective owners.
Disclaimer of Warranty
EXCEPT FOR SUCH WARRANTIES AND LICENSES PROVIDED WITH THE PRODUCT, THIS MANUAL AND THE PRODUCT ARE PROVIDED
“AS-IS”. TOPCON AND ITS DISTRIBUTORS SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS
CONTAINED HEREIN; NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE OR
USE OF THIS MATERIAL OR THE PRODUCT.
Please see the Operator’s/User’s Manual for detailed information on warranties and the license agreement which may apply to the
Product.
License Agreement
Use of any computer programs or software supplied by Topcon or downloaded from the Topcon website in connection with the Product
implies acceptance of the Terms and Conditions here and in the Operator’s/User’s Manual.
Please see the Operator’s/User’s Manual for detailed information on warranties and the license agreement which may apply to the
Product.
P/N 1000226-01 i
TOC
Table of Contents
Introduction .................................................................... 1
Installation ...................................................................... 2
SL-100 SIM Card .................................................................................... 2
Mag Mount Kit (Optional) ..................................................................... 3
9911-1014 Ethernet Cable to
MC-R3 Breakout B Cable Connection ................................................ 4
9911-1015 Power and Serial Cable to
MC-R3 Breakout A Cable Connection ................................................ 6
SL-100 and SL-R3 Antenna Installation ................................................ 9
SL-100 Cable Connection ....................................................................... 9
SL-100 Configuration ..................................................... 11
Enter SiteLINK Configuration Tool Web Interface ......................... 11
Check SL-R3 Firmware .................................................................... 12
Configure SL-100 for Cellular .......................................................... 13
Configure SIM Card (GPRS) ............................................................ 15
Configure VPN (If Running VPN on the SiteLINK Server) ............ 16
Configure SiteLINK Server .............................................................. 18
Check OpenVPN Status (If Running VPN) ...................................... 20
3DMC Configuration ...................................................... 21
Install 3DMC SiteLINK Authorization Codes ................................. 21
Connecting to the SiteLINK Server .................................................. 22
SiteLINK Direct ................................................................................ 24
Direct Network Connection .............................................................. 25
SL-100 LED Status ......................................................... 26
Table of Contents
SL-100 Upgrade Kit Installation and Setup Guide
ii
Safety Warnings ............................................................ 27
RF Radiation Hazard Warning ............................................................... 27
Regulatory Information ................................................. 27
IC Statements .......................................................................................... 27
Déclaration de conformité IC: ................................................................ 28
P/N 1000226-01 1
Introduction
Developed as an add-on component to a standard Topcon 3D system, the SL-100 is a rugged
housing for the SL-R3 SiteLINK radio modem, providing a SiteLINK-ready solution on the job
site for a variety of construction machines.
This manual describes how to install the SL-100, radio antenna, and cables, and how to configure
your unit.
Figure 1. SL-100
1000221-01 KIT, SL-100 Upgrade
• 1 ea. ASSY, SL-100 W/ SL-R3
• 1 ea. Power Cable - SL-100 to MC-R3, 9 ft. 11 in. (3000mm)
• 1 ea. Ethernet Cable - SL-100 TO MC-R3, 9 ft. 11 in. (3000mm)
• 1 ea. Kit, Antenna Config SL-R3
• 1 ea. SL-100 Upgrade Kit Installation and Setup Guide
• 1 ea. #20 Deutsch Removal Tool
1000222-01 KIT, SL-100 - MC-R3 Breakout B Connector (Optional)
• 1 ea. SL-100 – MC-R3 Breakout B Connector
• 1 ea. DRC26-40 MC-R3 Breakout B Connector Dust Boot
1000220-01 SL-100 Mag Mount Kit (Optional)
Installation
SL-100 Upgrade Kit Installation and Setup Guide
2
Additional Parts Required
• 3DMC upgrade to:
– 7050-1106 Password, 3DMC Standard + SiteLINK
– 7050-1106 Password, 3DMC Standard + SiteLINK Advanced
• SIM Card (SIM APN, Username, Password)
Installation
SL-100 SIM Card
1. Remove the eight (8) retaining screws from the base of the SL-100.
Figure 2. Remove Screws
2. Remove the base.
Figure 3. Remove Base
Remove Screw
8 Plcs.
Mag Mount Kit (Optional)
P/N 1000226-01 3
3. Insert the SIM card into the SIM card slot.
Figure 4. Insert SIM Card
4. Reinstall the eight (8) retaining screws onto the SL-100 base using Blue Loctite (not
included), and torque to 12 in-lbs.
Mag Mount Kit (Optional)
If you are installing the optional Mag Mount Kit (P/N: 1000220-01), refer to the Mag Mount
Installation Instructions (P/N: 7010-1026).
SIM Card Slot
Installation
SL-100 Upgrade Kit Installation and Setup Guide
4
9911-1014 Ethernet Cable to
MC-R3 Breakout B Cable Connection
1. Locate the existing installed MC-R3 Breakout B cable attached to Conn B of the MC-R3.
Figure 5. Breakout B Cable
2. Disconnect the Breakout B cable from the MC-R3.
3. Pull back the rubber boot on the Breakout B cable to expose the wire comb.
Figure 6. Expose Wire Comb
NOTICE
If the existing system does not have a Breakout B cable attached to Conn B, you
must have the SL-100 MC-R3 B Connector Kit (P/N: 1000222-01) to complete
the install.
Breakout B Connector
Rubber Boot
Wire Comb
Table des matières
Autres manuels Topcon Modem radio
