Topcon DC-4 Manuel utilisateur
USER MANUAL
DC-4 Capture Software
Ez Capture for DC-4
1
INTRODUCTION
Thank you for purchasing the Topcon Ez Capture for DC-4.
INTENDED USE / INDICATIONS FOR USE
You can use this software when the Topcon Digital Photography Unit DC-4 for Slit Lamp is
used.
FEATURES
The following functions are offered by connecting this software with the Topcon Digital Photog-
raphy Unit DC-4 for Slit Lamp.
• The DC-4 camera can take a picture and at the same time it is possible to save, view and
delete the captured image.
• It is possible to enhance contrast while viewing images.
• It is possible to print images while viewing images.
PURPOSE OF THIS MANUAL
This manual outlines the Ez Capture for DC-4 including operating. Always keep this user
manual at hand.
Precautions
• Using and reproducing of the software and/or the User's Manual, in whole or in part, without
permission from Topcon Corporation, is strictly prohibited.
• Please use this software according to this User Manual.
• This software will use the hard disk of a computer to save the photographed image (or
movie) temporarily. Before using a hard disk, make sure that its free capacity is sufficient.
• Connect the DC-4 and computer with the special LAN port. If the DC-4 or computer is con-
nected wrongly, the Network may be adversely affected or the DC-4 may not operate prop-
erly.
• This User Manual is made on an assumption that the user already has knowledge of the
personal computer (PC) and Microsoft Windows operating systems. This User Manual does
not describe details on how to handle common operation procedures of the PC and
Microsoft Windows operating systems.
• For handling a computer and operating Microsoft Windows, refer to the user manual
attached to each of them.
• If you have made a mistake in handling a computer or operating Microsoft Windows and
this software, the files contained by the computer and Microsoft Windows or this software
may be destroyed.
• Specifications of this software and descriptions of the User Manual are subject to change
without prior notice.
2
Trademarks
Ez Capture for DC-4 is a trademark of TOPCON.
Microsoft, MS and Windows are registered trademarks of Microsoft Corporation.
Windows 7 is a trademark of Microsoft Corporation.
1. No part of this manual may be copied or reprinted, in whole or in part, without prior written
permission.
2. The contents of this manual are subject to change without prior notice and without legal
obligation.
3. The contents of this manual are correct to the best of our knowledge. Please inform us of
any ambiguous or erroneous descriptions, missing information, etc.
©2013 TOPCON CORPORATION
ALL RIGHTS RESERVED
3
CONTENTS
INTRODUCTION .............................................................................................................................. 1
STARTUP AND SETTING OF Ez Capture for DC-4 ......................................... 5
Getting started .................................................................................................................................. 5
Startup Screen ................................................................................................................................. 5
Operation Icon .................................................................................................................................. 7
Configuration Setting ........................................................................................................................ 8
OPERATION OF Ez Capture for DC-4 ...................................................................... 19
Photography Startup ...................................................................................................................... 19
Operation of DC-4 Grabber ............................................................................................................ 20
Saving the image ............................................................................................................................ 33
View of image ................................................................................................................................. 34
COMPUTER OPERATION ENVIRONMENT .......................................................... 36
Necessary Specifications and Performance for Computer ............................................................. 36
GENERAL INFORMATION ON USAGE AND MAINTENANCE .............. 37
INTENDED PATIENT POPULATION ............................................................................................. 37
INTENDED USER PROFILE ..........................................................................................................37
ENVIRONMENTAL CONDITIONS FOR USE ................................................................................ 37
DISPOSAL ..................................................................................................................................... 37
4
DISCLAIMERS
DISPLAYS AND SYMBOLS FOR SAFE USE
To encourage safe and proper use and to prevent danger to the operator and others or potential damage
to property, important cautionary messages are placed on the instrument body and inserted in the instruc-
tion manual.
We suggest that everyone using the instrument understands the meaning of the following displays, icons
and text before reading observes all listed instructions.
DISPLAYS
• TOPCON shall not take any responsibility for damage due to fire, earthquakes, actions by third per-
sons and other accidents, or damage due to negligence and misuse by the user and any use under
unusual conditions.
• TOPCON shall not take any responsibility for damage derived from inability to properly use this
instrument, such as loss of business profit and suspension of business.
• TOPCON shall not take any responsibility for damage caused from using this instrument in a man-
ner other than that described in this user manual.
• Diagnoses made shall be the responsibility of pertaining doctors and TOPCON shall not take any
responsibility for the results of such diagnoses.
Display Meaning
NOTES Useful functions to know. Paying attention to these will prevent the
problems noted.
5
STARTUP AND SETTING OF Ez Capture for DC-4
STARTUP AND SETTING OF Ez Capture for DC-4
Getting started
To activate Ez Capture, click on the " Start" on the Windows desktop, click "All Programs" and then
click "TOPCON EzCapture"-"EzCapture" on the Menu. Or double-click the shortcut icon of [Ez Cap-
ture] shown in "Ez Capture icon" on the desktop to start Ez Capture.
Startup Screen
Ez Capture is started and the following startup screen is displayed. The startup screen may be cus-
tomized by setting. Refer to "Setup of Ez Capture". In the factory setting, the "Slit", "View" and "Exit"
icons are displayed in portrait orientation.
NOTES
• Log in Windows with a user ID of administrator authority. Ez Capture for DC-4
requires administrator authority.
• For using Ez Capture for DC-4, please set off the sleep function of Windows.
If Windows gets to sleep while Ez Capture is working, there is a possibility that
unexpected problems may occur after resuming from sleep.
If Windows gets to sleep, please restart the computer.
NOTES
When starting Ez Capture, the message "Ez Capture or Ez Capture Configura-
tion is starting" is sometimes displayed. In this case, check if Ez Capture or Ez
Capture Configuration has already started. If each of them does not start yet,
restart the computer. Then, restart Ez Capture.
Ez Capture icon
6
STARTUP AND SETTING OF Ez Capture for DC-4
In case all the icons are displayed horizontally, the following screen appears.
Ez Capture Startup Screen
Ez Capture Startup Screen (Horizontal)
7
STARTUP AND SETTING OF Ez Capture for DC-4
Operation Icon
Icon/Name Description
Capture
Starts the photography module registered in Setup.
(For registering the photography module, refer to "Icons of Ez Capture" of
"Setup of Ez Capture". In the example on the left the displayed name is set
as Slit.)
View
Starts Windows Explorer and opens the image saving folder.
Folder
Specifies the folder where the image is to be saved.
Exit
Exits Ez Capture.
Shutdown
Ends Windows.
8
STARTUP AND SETTING OF Ez Capture for DC-4
Configuration Setting
Click [ Start] - [All Programs] - [TOPCON Ez Capture] - [Configuration], and "Ez Capture Configu-
ration screen" appears. You can set up Ez Capture.
NOTES
• Configuration cannot start simultaneously while Ez Capture is starting. Please
start Configuration after exiting Ez Capture.
• When Windows UAC (User account control) is set to ON, the "User account
control" screen appears. Click the [Yes] button on the screen to proceed to
the next step.
Button Function
Setup Ez Capture Starts the setup screen of Ez Capture.
Extended Capture Module Starts the setup screen of the extended capture module.
Print Starts the setup screen of the print.
Exit Ends the setup screen.
Ez Capture Configuration screen
Autres manuels pour DC-4
1
Table des matières
Manuels Carte PCI populaires d'autres marques
Belkin
Belkin F5D7000F Manuel utilisateur
Pericom
Pericom PI7C7100 Manuel utilisateur
ADLINK Technology
ADLINK Technology cPCI-3548 Manuel utilisateur
Digium
Digium TE200 Series Manuel utilisateur
Allo.com
Allo.com 2nd Gen E1/T1/J1 Manuel utilisateur
Western Digital
Western Digital FireWire PCI Adapter Manuel utilisateur