1
Setting up the SL Screen on your wireless network
In order to be able to update your screen via www.topazcms.com, you need to connect the
screen to the internet via your local Wi-Fi network. Please follow the instructions below for how
to connect your screen wirelessly.
IMPORTANT NOTE - This wifi connection must be a private local network with direct
internet access - NOT a public network (eg, ensure a confirmation or guest code is not
needed for access). ‘Openzone’ Networks cannot be used.
1. Carefully unpack your screen. In the accessories bag you will find a Wi-Fi antenna.
Carefully screw this onto the Wi-Fi connector in the top corner of the screen.
2. Place the screen in a location with a strong Wi-Fi signal and plug the screen into a power
point. Turn the mains power on and your screen will automatically boot up.
3. Your screen will now initialize the internal W-Fi card. Once initialized it will try to connect
to a Wi-Fi network but fail–this will fail because it hasn’t been set up yet.
4. The screen will then begin to display its default content. Press STOP button on the
remote control to go back to the home screen (pictured below). No other button will
work on the remote whilst content is playing.
NOTE –when in portrait mode this is located at the bottom-right of the screen, in
landscape mode this is located at the bottom-left of the screen
