Toolots GSN-Z8-1 Manuel utilisateur
COMMERCIAL ICE MAKER
INSTRUCTION MANUAL
It is important that you read these instructions before using your commercial ice
maker and we strongly recommend that you keep them in a safe place for future
reference.
TABLE OF CONTENTS
RECEPTION AND INSPECTION ......................................................................................1
IMPORTANT SAFETY TIPS.............................................................................................. 2
APRELIMINARY UNDERSTANDING OF YOUR ICE MAKER.............................................4
INSTALLATION AND PLACEMENT OF SOLES................................................................. 5
INSTALLATION OF WATER SUPPLY AND DRAINAGE.....................................................6
CLEANING AND MAINTENANCE.................................................................................... 7
CONVENTIONAL PRECAUTIONS.................................................................................... 8
ELECTRICAL SAFETY MATTERS.......................................................................................8
CONTROL PANEL OPERATING MANUAL....................................................................... 9
OPERATION STEPS OF ICE MAKER...............................................................................10
TROUBLESHOOTING.................................................................................................... 12
TECHNICAL PARAMETERS............................................................................................14
1
Re
Thank you for selecting our company's automatic ice maker. In order to protect your
legitimate rights and interests, please pay attention to the following things when
receiving and checking the machine:
1. The outer packing of the machine is intact.
2. Machine’s model is consistent with your purchased.
3. The appearance of the machine is in good condition.
4. The attached parts are complete.
5. The internal components of the machine are in good condition.
RECEPTION AND INSPECTION
2
WARNING:This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use of
the appliance by a person responsible for their safety. Children should be supervised
to ensure that they do not play with the appliance.
WARNING: When positioning the appliance, ensure the supply cord is not trapped or
damaged.
WARNING: Do not locate multiple portable socket-outlets or portable power supplies
at the rear of the appliance.
WARNING: The illuminating LED lamp can not be replaced by the user, it must be
replaced by the manufacturer or its service agent or a similarly qualified person in
order to avoid a hazard.
WARNING: Do not store explosive substances such as aerosol cans with a flammable
propellant in this appliance.
Your personal safety and safety of others are the most important.
We have prepared many safety tips related to this machine for you.
Be sure to read and follow these tips.
This is a security warning sign
All security alerts follow the words "danger" and "warning".
If you do not comply with these safety tips, you may be seriously injured.
All safety tips describe potential hazards, tell you how to reduce the chances of injury
and what will happen if you do not follow the safety tips.
IMPORTANT SAFETY TIPS
3
If the ice maker is using or making ice, please do not touch the evaporator, which
may freeze your skin.
Before using electrical appliances, basic safety rules must be observed to reduce fire,
electric shock and damage to people or material. Please read the safety tips carefully
before using this appliance.
When the power cord is damaged, do not use and operate the machine.
use the correct power outlet and ensure that the power plug is completely
inserted into the socket.
Please do not put the power line on the carpet or heat insulation, do not cover
the power line, the power line should leave the walking channel, and do not
immerse into the water.
It is not recommended to use the power extension cord. This may result in
overheating or fire. If you must use it, use at least 1.5 square extension line.
Please cut off the power supply before cleaning or repairing.
When children are nearby, they must be supervised.
Please do not use flammable liquids to clean the ice maker. This may cause fire
or explosion.
Please do not overturn the ice maker. If there is any overturn, the machine will
be placed for 2hours before starting.
In winter, if the ice maker is moved indoors from outside, wait for a few hours before
power up, so that the temperature of the ice maker rises to the same temperature as
WARNING
evaporator
DANGER
4
that of the room.
Warning: keep ventilation free around the appliance. Do not use it in the embedded
structure.
Warning: in addition to the manufacturer's recommended method, no mechanical or
other means should be used to accelerate the defrosting process.
Warning: no damage to the refrigeration circuit.
Warning: please do not use other liquids to make ice except drinking water.
Warning:Except for the type recommended by the manufacturer, electrical
appliances should not be used in the food storage room of utensils. Explosives, such
as combustion-supporting sprays, should not be stored in appliances.This product is
suitable for milk tea shops, bars and KTV.
GZN-Z8-1
1.Box shell：No other articles are allowed to be placed on it.
2. Evaporator
3.water pipe: no deformation, breakage
4. base foot: adjustable evenness.
5. door
6. Light: bactericidal effect
7. Base foot
1
6
2
4
3
5
7
APRELIMINARY UNDERSTANDINGOF YOUR ICE MAKER
5
INSTALLATION AND PLACEMENT OF SOLES
Foot Installation And Foot Placement
1. Screw the feet of the ice maker to the baseplate.
2. Each foot must be screwed up and tightened so as
not to bend.
3. Put the ice maker in a sturdy and flat position.
4.Adjust the height of the foot to make the ice maker
level.
5. ice making machine should not be installed in the
environment without sewer and water seepage, and
it is strictly prohibited from high temperature
equipment.
6. air-cooled ice making machines (such as refrigerators, ovens, etc.) rely on air
circulation to dissipate heat. So it is necessary to keep the space above
30cm to benefit the heat dissipation.
7.please do not put anything in front of the machine，block the vent.
A
B
C
D
8. control panel:
A.regulates ice making time
B. open key
C .timing
D. cleaning
6
INSTALLATION OF WATER SUPPLY AND DRAINAGE
Warning: Only drinking water can be connected. New hose assemblies attached to
the appliances must be used. Old hose assemblies cannot be reused. Water supply
pressure should be 0.1-0.8 MPa if the pressure is greater than 0.8 MPa, need to
connect a pressure relief valve from the dry through the water of self-weight
drainage, so the drainage pipe should be adequate height or drop.
A、Connect the right-angle joint of the external intake pipe to the G3/4 head of the
rear cover plate. Make sure that the rubber seals are in the correct position and
hang the joint by hand to ensure no leakage.
B、connects the other end of the external water inlet pipe to the tap.
C、drain pipe should be connected to the outlet of the room, while ensuring that the
drain of the machine is high enough to drain the room.
7
CLEANING AND MAINTENANCE
Note: Before any cleaning or maintenance steps, please unplug the power plug and
do not use the wine tip and other highly corrosive wipers to clean the ice maker. This
may cause cracking of plastic parts.
1. Peripheral: Use a clean, soft cloth to wipe the periphery of the ice maker. At least
once a week. Use a wet cloth with a neutral cleaner to remove grease or other
impurities.
2. Ice-spoon cleaning: dip the ice-spoon into neutral detergent and water Nirvana
compound for at least 3 minutes, then rinse it with clean water and shake it dry.
3. Refrigerator cleaning: Open the ice door, remove all the ice, clean the inner wall
of the refrigerator with neutral detergent, and then rinse with clean water.
4. Pump cleaning: take off the hose, take out the pump, take off the front cover.
After rotating the inner cover counterclockwise, you can take off the inner cover.
Clean the pump fan blade with a brush. It is recommended to wash once a week.
Warning: Cyclopentane is used in insulating and insulating materials of ice maker,
and properly disposed of when discarded, such as sent to a qualified recycling
company for disposal, should not be incinerated.
8
CONVENTIONAL PRECAUTIONS
1. When transportation and mobile location, the ice machine tilt shall not exceed 45
degrees.
2. Ice machine, please use independent water source, and check regularly to
prevent water pressure is too low, fluctuations or filter clogging.
2. Do not store any sundries in the ice storage room, or freeze any food in the ice
storage room and keep the ice shovel clean.
3. Switch the ice storage bucket plastic door, should be light open and light closed,
don't beat box door, after taking the ice, please turn off the sliding door of the ice
storage bucket.
4. Ice machine should be far away from the heat source. It is strictly prohibited to
use in high temperature or low temperature environment. It is necessary to avoid
direct sunlight in order to avoid affecting the heat dissipation of the machine.
5. It is forbidden to wash the surface of ice machine directly with water, otherwise it
may lead to short circuit, leakage and other faults.
7. After the ice machine is used for a period of time, if it is stopped for a long time, it
should be electrified every two months for four to six hours.
Table des matières
