Tokyo Electronic CS8530-01 Manuel utilisateur

B/W CCD Camera

CS8530-01

Operation Manual

CONTENTS

1. PRODUCT DESCRIPTION 1

2. FEATURES 1

3. CONFIGURATION 1

4. OPTIONAL ACCESSORIES 1

5. FUNCTION OF EACH SWITCH/MODE 2

6. INTERFACE 4

7. SPECIFICATION 5

8. TIMING CHART 6

9. EXTERNAL-VIEW DRAWING 9

Thank you for purchasing our CS8530-01 B/W-CCD camera. This operation

manual contains many important information such as how to use this equipment

correctly and safely. Please read through this manual carefully. After reading,

keep this manual by the side of your equipment for future reference.

Enter the blank below Product Serial Number, which is found on

bottom/rear chassis of your camera. Keep this number for your record.

Serial No.

TOKYO ELECTRONIC INDUSTRY CO., LTD.

GENERAL SAFETY INSTRUCTIONS

• This operation manual contains important information for the operator (user)

and/or people around him/her to avoid personal injuries, or property damages

against him/her or people around him/her by using this product correctly.

• Prior to use, read this operation manual carefully to fully understand its

instructions for correct use.

[Definition of markings]

The meaning of each mark used in this instruction manual is given below

DANGER

This mark warns the user that improper use, indicated with this

mark, may cause death or severe personal injuries against the user or

people around him/her.

CAUTION

This mark warns the user that improper use, indicated with this

mark, may cause personal injuries (*1) or material damages (*2)

against the user or people around him/her.

Notes

*1 : Personal injuries mean wounds, burns, electric shocks, and others for which the person

injured need not to be hospitalized nor to be cared for the long term.

*2 : Material damages mean any direct or consequential damages related to property or

material loss.

[This mark indicates what the user SHOULD NOT DO. The details of things which

the user should not do are described next to this mark.

QThis mark indicates what the user MUST DO. The details of things which the user

must do are described next to this mark.

This mark indicates that the user must be alert against a possible DANGER. The

details of the DANGER which the user must be aware of are described next to this

mark.

ÌThis mark indicates that the user are given a CAUTION against possible hazards.

The details of the CAUTION which the user must be aware of are described next to

this mark.

QHandling Precautions

DANGER

If any overheating sign is observed, discontinue the use immediately.

In the event that smoke, smell, or any other overheating sign is observed, turn the

power switch of the system OFF immediately, and remove the camera cable from

the camera connector. Do NOT try to continue to use the camera. To do so in spite

of clear signs of malfunction invites a fire, an electric shock hazard, or a serious

damage to the camera. In such case, contact us or our dealer/distributor from which

you purchased the camera for repair service.

If any malfunctioning sign is observed, discontinue the use immediately.

Do NOT try to use the camera when it is malfunctioning. (Ex. No images on the

monitor) In the event of malfunction, turn the power switch of the system OFF

immediately, and remove the camera cable from the camera connector. In such

case, contact us or our dealer/distributor from which you purchased the camera for

repair service.

If any foreign object gets into the camera, discontinue the use immediately.

In the event that liquids, small particles, or any other foreign objects get into the

camera, do NOT try to continue to use the camera. To do so invites a fire or an

electric shock hazard. In that case, turn the power switch of the camera OFF

immediately, and remove the camera cable from the camera connector. After that,

service/technical advice.

[

Do NOT disassemble the camera.

Do NOT attempt to pull apart; repair, or modify the camera on your own. To do so

leads to a fire or an electric shock accident. Contact us or the dealer/distributor

from which you purchased the camera for repair/modifacation.

[

Do NOT supply any power than specified.

The camera is designed to work only under specified voltage. Do NOT attempt to

drive the camera with the power other than DC12V. Operating the camera under

power other than DC12V invites a fire or a electric shock hazard..

[Do NOT use the camera in a high-humidity environment.

Do NOT place the camera near a humidifier, or in other high-humidity

environment. To do so may cause a fire or an electric shock accident.

CAUTION

If the camera is operated in the electromagnetic field, there may be cases where

noises (vertical, horizontal, or oblique stripes) may appear to a video output.

In that case, take preventive measures on the electromagnetic-wave generating

source so that the camera do not receive the interference by the electromagnetic-

wave. Take extra precautions against electromagnetic-wave-interference if the

camera is used with a servomotor, inverter, or other electromagnetic-wave-

generating equipment.

Avoid giving a strong shock against the camera. If your camera is used in the

system where its camera connector is subjected to strong repetitive shocks, the

camera connector is possible to break down. If you intend to use your camera in

such a situation, make sure to use an optional-connector-fixing-hardware to

connect the connector-plug to the camera body.

When the camera is not in use, put a lens or a lens-cap onto the cam head so that

the image pickup plane of CCD is protected from dust, foreign object, or other

flaw-causing object. If the glass plane (image pickup plane) gets dirty, clean it with

a cotton swab. When it needs to be cleaned with a cleaner, be sure NOT to use any

organic solvent other than ethyl alcohol.. As a countermeasure against

condensation, when the camera is moved from a warm place to a cold place, take

appropriate precautions to prevent condensation from forming on the camera.

Do not pull strongly the camera cable nor swing it. The stress from pulling or

swinging may cause damage in the coating of the cable, or breaks in the inside

wires.

Avoid short-circuiting its signal output. Otherwise, the camera might be damaged.

If too much amount of light, (= the incoming light amount of 100 times or greater

in comparison with standard light)enters CCD image pickup plane, video output

might not be obtained. In such a case, take measures to reduce the amount of

incoming light.

Do NOT expose the camera to intensive light (sunlight, etc.) to prevent its inner

CCD from gelling damaged.

When mounting a lens, take extra caution so that the lens is not tilled, nor does flaw

exist at the lens-mount-screw part. Also check to confirm that no dirt nor other

foreign object is put inside. Improper mounting might cause the parts to become

locked.

DANGER

[

Do NOT use any optional unit other tan, manufacturer-supplied one. [We disclaim

any responsibility for damages or losses incurred by user due to the use of

unauthorized / unofficial option units supplied by a third party]

[RESTRICTION FOR USE]

In case malfunction of this equipment (e.g. video output cut-off) can be expected to lead to

significant accident, avoid using this equipment for such system integration use.

[CASES FOR INDEMINITY (LIMITED WARRANTY)]

We shall be exempted from taking responsibility and held harmless for damages or losses

incurred by user in the following cases.

* In case damages or losses are caused by fire, earthquake, or other acts of Gods, the act by

third party, misuse by the user deliberately or erroneously, use under extreme operating

conditions.

* In case indirect, additional, consequential damages (loss of expected interest, suspension of

business activities) are incurred as results of malfunction of non-function of the equipment,

we shall be exempted from assuming responsibility for such damages.

* In case damages or losses are caused by incorrect use which is not in line with the

instructions in this instruction manual.

* In case damages or losses are caused by malfunction resulting from band connection with

other equipment.

* In case damages or losses are caused by repair or modification done by the user.

IMPORTANT SAFETY INSTRUCTIONS

(1)This device is designed and guaranteed to work under the temperature range of

0 through 40 degree C. Avoid using the equipment beyond that limits.

(2)Do NOT expose the camera’s image-pickup-plane to sunlight or other intense

light directly. Its inner CCD (charge-coupled device) might be damaged.

(3)In the event that any abnormal condition is observed, turn the power switch

OFF immediately. Do NOT try to continue to use the camera. To do so in spite

of clear signs of malfunction invites a fire, an electric shock hazard, or any

other serious damage to the camera. In such case, contact us or our

dealer/distributor from you purchased the camera for repair service.

(4)To clean the body of this equipment, make sure to torn the power switch OFF

first. To remove stubborn stains, use a soft cloth soaked in diluted acid-free

detergent. After that, clean with a dry cloth.

(5)In case the image-pickup-plane should be settled with fine dust, dirt, of

scratched, ask our distributor for technical advice.

1. PRODUCT DESCRIPTION

Model CS8530-01 is an integrated (one-body) type B/W CCD camera employing a

1/3"VGA-compatible CCD which reads out all pixels data in 1/30 sec.

2. FEATURES

(1) Ultra-compact & light weight camera head

CS8530-01 features its ultra-compact and light-weight camera head. This camera-head will

free you from your integration-space-problem. In addition, it has an excellent shock &

vibration resistance.

(2) All pixel’s data Read Out

The CCD of CS8530-01 reads out all pixel’s data in approximately 1/30 sec.

(3) High vertical resolution

As all pixel’s data are read out even in random trigger shutter mode (in 1/30 sec.), images with

no deterioration in vertical resolution are gained.

(4) Square grid pattern CCD

Pixel’s in CCD are aligned in square grid pattern. This makes it easier to perform computation

correctly for image processing use.

(5) External Sync.

The camera is switched over to external synchronization operation automatically when

external HD/VD signals are input.

(6) Random trigger shutter function

Random trigger shutter, which scans light-exposure in synchronization with external trigger

signals, is build in. This function enables the camera to capture images at any given timing.

3. CONFIGURATION

(1) Camera head 1

(2) Accessory

Operation Manual 1

4. OPTIONAL ACCESSORIES

(1) Dedicated cable (DC SYNC IN cable) 1

(2) Camera mounting kit 1

5. THE FUNCTION OF EACH SWITCH/MODE

(1)GAIN control selection (Rear SW)

①MANU : Manual GAIN volume (Adjustable with a rear SW)

②FIX : Initial factory-set level

(2) Video output mode selection (Rear SW)

①1/60s MIX: 1/60s Interlace MIX mode (In this mode, vertical 2 pixels are added in read-out

process. Images with high sensitivity are obtained with this mode)

②1/30s : 1/30s Non-interlace mode (In this mode, all pixel’s data are read out in 1 frame.

Images with high vertical resolution are obtained with this mode)

(3) Shutter mode selection (Selectable with the rear SW)

①NOR mode: Normal electronic shutter

-1. High-speed shutter (initial factory-setting) (1/8000s-1/60s)

-2. Flicker-less: (1/100s)

②RDM mode: Random trigger shutter

--- For controlling exposure time with the pulse-width of external trigger signal

③R.R mode: Restart & Reset

--- For outputting images at the timing given by external VD signals

Long-time exposure available

SW1 ON OFF Function

1 M.GAIN FIX GAIN control SW

2 1/30s 1/60sMIX VIDEO OUT mode

3 Shutter speed SW

4 Refer to (4) Shutter speed selection (Exposure time) below. OFF ~ 1/8000s

5 8 steps selection

RDM NOR Shutter mode SW

7 R.R. NOR NOR - RDM - R.R.

8 OFF FIXED

No setting available

CAUTION

Do NOT set SW1-6 and SW1-7 ON concurrently (at the same time).

(4) Shutter speed selection (Exposure time)

①Under NOR mode : The shutter speed of normal electronic shutter is selectable among the

ranges shown below. [Selection with the rear SW]

SW1

3 4 5

Shutter speed (sec.)

OFF OFF OFF Normal

(Factory –setting)

ON OFF OFF 1/100

OFF ON OFF 1/250

ON ON OFF 1/500

OFF OFF ON 1/1000

ON OFF ON 1/2000

OFF ON ON 1/4000

ON ON ON 1/8000

②Under RDM mode : The shutter speed is controlled via external trigger signals.

[Selection with the rear SW]

This mode should be used when under range of shutter speed with freer timing than under NOR

mode is necessary.

TRIG IN

③Under R.R mode: The shutter speed is controlled via external VD signals.

[Selection with the rear SW]

(Make sure to set this SW OFF to operate the camera in other modes)

The shutter speed (exposure time) is determined by the interval of VD signals. Lower shutter

speed with freer timing than under NOR mode is obtained easily.

REAR PANEL SWITCH

CAUTION

Do NOT set SW1-6 and SW1-7 ON concurrent (at the same time).

6. INTERFACE

(1) Connector pin assignment

Connector used :

DC/SYNC connector --- HR10A-12R-12PB Manufactured by HIROSE DENKI

Compatible connector :

DC/S'Y'NC connector --- HR10A-12P-12S Manufactured by HIROSE DENKI

1 GND

2 +12V

3 VIDEO.GND

4 VIDEO

5 HD/VD.GND

6 HD.IN

7 VD.IN

8 GND

9 TRIG IN

10 GND

11 +12V

12 GND

7. SPECIFICATION

Model CS8530-01

TV system EIA

Image sensor All Pixel’s Data Read-out Interline CCD

Optical size 1/3 inch equivalent

Active pixel 659(H) X 494 (V)

Unit cell size 7.4(H) X 7.4(V)µm

Scanning area 4.789(H) X 3.589(V)mm

Scanning lines 525 lines

Interlace 1/60 1/60s interlace

1/30 1/30s non-interlace

Sync system Internal/External automatic switch-over

Scanning frequency 15.734kHz(H)

59.94kHz(V)(1/60s interlace) or 29.97kHz(V)(1/30s non-interlace)

Illumination Standard 400 lx (F5.6)

Minimum 1.5 lx (F1.4 GAIN MAX)

Aspect ratio 4:3

Video output VS 1.0V(p-p)/75 Ω(AC coupling output)

Resolution 485TVlines(H), 485lines(350TV lines)(V)

S/N Standard: 56dB(p-p)/rms (GAIN/FIX)

Input signal

(1)Ex. Sync. signal HD/VD

Input level HD,VD: LOW: 0~1V/10kΩ

HD,VD: HIGH: 4~5V/10kΩ

Pulse width HD: HD: More than 6.5 µ S(negative) VD: More than 250 µS (negative)

(2)Shutter trigger (Exposure-starting-cue signal in random trigger shutter mode)

Input level HD,VD: LOW: 0~1V/10kΩ

HD,VD: HIGH: 4~5V/10kΩ

Electronic shutter

High speed shutter 1/8000s~1/60s (8 scale)

RDM Pulse interval of trigger signal selectable

R.R. External synchronization signal VD pulse

GAIN Fix/M.GAIN switchable

Fix Pre-set gain (Factory-set gain)

M.GAIN Manual control

γcorrection γ=OFF

Power source DC12V ± 10%

Power consumption Approx. 1.4W

Ambient condition Temperature

Operation guaranteed : -5°C~45°C

Performance guaranteed: 0°C~40°C

Humidity:

Operation guaranteed : 25~75%

Performance guaranteed : 30~70% (No condensation)

Lens mount C mount

(No back-focus adjustment function, Without lens-fixing screw)

External dimension 31(W) X 29(H) X 70 (D) mm (Including lens-mounting part)

Weight Approx. 75g

8. TIMING CHART

(1) 1/60s Interlace MIX mode

In this mode, 1/60s interlace video signals are output through VIDEO terminal.

(2) 1/30s Non-interlace mode

In this mode, 1/30s non-interlace video signals are output through VIDEO terminal.

(3) Random trigger shutter mode

In this shutter mode, the camera outputs accumulated(integrated) images at the timing given by

input of VD signals after CCD accumulation(integration) is over. Consecutive external sync

signal input is available.

[Input signals marked with * below are external signals]

IDEO OUT

* TRIG IN

* EXTERNAL

VD IN

* EXTERNAL.

HD IN

VIDEO OUT

Table des matières

Autres manuels Tokyo Electronic Caméra de sécurité

Tokyo Electronic

Tokyo Electronic CS3730DC Manuel utilisateur

Tokyo Electronic

Tokyo Electronic CS3910H Manuel utilisateur

Tokyo Electronic

Tokyo Electronic CS9200 Manuel utilisateur

Tokyo Electronic

Tokyo Electronic CS8320B Manuel utilisateur

Tokyo Electronic

Tokyo Electronic CS8320B Manuel utilisateur

Tokyo Electronic

Tokyo Electronic CS8541D series Manuel utilisateur

Tokyo Electronic

Tokyo Electronic CS8550D Manuel utilisateur

Tokyo Electronic

Tokyo Electronic CS8550i-01 Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur