Toa DT-E70 Manuel utilisateur

INSTALLATION MANUAL

TOA INTERCOM SYSTEM

DATA TRANSMITTING UNIT DT-E70

Please follow the instructions in this manual to obtain the optimum results from this unit.

We also recommend you to keep this manual handy for future reference.

TOACorporation

CONTENTS

General

description

......................................................................................................................... 3

Part description ............................................................................................................................. 4

Channel

selector

switch

setting

....................................................................................................... 4

Installation ................................................................................................................... 5

Connection ................................................................................................................. 6~7

Time

setting

.........................................................................................................

8~9

YC-900

connection

................................................................................................................ 10~11

Specifications

................................................................................................................................ 12

Accessories

.........................................................................................................

GENERAL DESCRIPTION

The DT-E70 Data Transmitting Unit is designed for exclusive use with the TOA EXES-6000 series

exchanges. Functions made available from this unit when used in conjunction with the DR-B61 Data

Receiving Unit and the HF-250M Intercom Station with a display include In/Out Annunciation and Calling

Party Indication capabilities. The unit can be used fro both desk-top and rack-mounted applications.

-3-

PART DESCRIPTION

[Front view] [Rear view]

Release knob

Switch cover

Data output connector (CN3) for HF-250M

Data input connector (CN2)

Data input connector (CN1)

Data output terminal for DR-B61

Power input terminal

CHANNEL SELECTOR SWITCH SETTING

Pull the release knob forward to remove the switch cover, and the channel selector switch can be seen. Set

the channel selector according to the functions. Refer to the "EX-600 and CP-66 Installation Hand Books" for

the functions of each channel.

-4-

INSTALLATION

1. Rack mounting applications

Using the supplied brackets, mount the unit in the rack.

Note : The DT-E70 unit can not be mounted in the EX-610/620 exchanges. Mount it using the optional

CR-271N or CR-392N cabinet rack.

2. Desk top applications

Attach supplied rubber feet to holes (

2.5mm) in the bottom surface (four places).

-5-

CONNECTION

[ Rear cover wiring example ]

DR-B61 unit

YR-802

or YR-806

To other DT-E70 units

Twisted paired cable

BX-610/620

Terminal box

EXES-6000 series

exchange

Interface connector

6-pin modular jack type rosette

(4-conductor)

HF-250M's

modular plug cord

24V DC power supply

[AD-242A (2.5A)]

Twisted paired cable

YR-810

or YR-801

-6-

1. Connect between the exchange and the data transmitting unit using the YR-806 cable (1m in length).

When the unit is placed on the EX-610 or 620 exchange, use the YR-802 cable (0.4m).

2. For connection between the exchange and the terminal box, use the YR-810 cable (for station) or the

YR-801 cable (for paging or tie-line unit).

3. When installing additional data transmitting units, use the YR-803 cable.

4. CN1 or CN2 connector may be used for connection because both connectors are internally parallel-

connected.

5. Use the 24V DC power supply having the current capacity of 0.2A per unit. If only one unit is used, the

power can be provided from the exchange's 24V output.

6. Use the shielded or twisted paired cable for connection between the data transmitting unit and the

DR-B61 data receiving unit.

7. Turn the power on for the data transmitting unit before the exchange. When turning the power off, first

set the exchange power switch to OFF.

8. Using the commercial 6-pin modular jack type rosette (4-conductor), connect HF-250M's modular plug

cord L1 and L2 to the BX-610 or BX-620 terminal box, and L3 and L4 to the optional YC-900 terminal

box.

Note : Remove the front and top panels to connect the EX-600 and the YR-806.

[Front view]

HF-250M's modular plug cord

[YC-900]

[BX-610/620]

Data line

Intercom line

6-pin modular jack type

rosette (4-conductor)

-7-

TIME SETTING

[Front view of DT-E70E]

[Rear Inside view of DT-E70E]

[Top view of HF-250M]

[Bottom view of HF-250M]

[Front view of HF-250M]

Release knob

Switch cover

Time data backup switch

[REGISTER] switch

HF-250M's Modular plug cord

(6-pin 4-conductor modular plug cord)

Terminal cover

TX switch

Dial keys

Liquid crystal display (LCD)

-8-

Pull the front-mounted release knob forward to remove the switch cover.

Switch the time data backup switch ON.

Connect the modular jack connector to the HF-250M's modular plug cord.

Remove the HF-250M's terminal cover on the bottom panel.

Switch the TX switch ON.

appears on the liquid crystal display.

Switch the HF-250M's [REGISTER] switch ON.

Press the PTT key to display

Press the PTT key again to display

Dial any one of the dial keys ( ) to display the current time.

When entering "a.m." time, dial

When entering "p.m." time, dial

When entering " 24-hour" mode, dial

Current "a.m.", "p.m." or "24-hour" time is displayed.

Dial the desired 4-digit time data to display the data.

To cancel a misdialed number, press the

key and repeat the procedure from step

Press the PTT key If the displayed time is correct. is displayed.

Switch the [REGISTER] switch OFF. Current time is displayed.

Switch the TX switch OFF.

Mount the terminal cover in place.

Disconnect the HF-250M from the modular jack connector.

Attach the front switch cover in place.

Note : Make sure to switch the TX switch OFF when using the HF-250M as a usual station. If ON, the data

from the DT-E70 is not displayed accurately.

-9-

YC-900 CONNECTION

Connect the YC-900's ribbon connector to the DT-E70's rear-mounted CN3 connector.

Referring to the indication on the YC-900, connect the YC-900's clip terminal to the commercial rosette

as shown in <Tables 1 and 2>.

Connect the rosette's L1 and L2 to the BX-610 or 620 terminal box.

Connect the rosette's L3 and L4 to the YC-900's clip terminal.

< DT-E70 Setting for channel 6 >

Indication on YC-900

(clip terminal)

201/217

202/218

203/219

204/220

205/221

206/222

207/223

208/224

Rosette's hard-wired

station No. (L3, L4)

201

202

203

204

205

206

207

208

Indication on YC-900

(clip terminal)

209/225

210/226

211/227

212/228

213/229

214/230

215/231

216/232

Rosette's hard-wired

station No. (L3, L4)

209

210

211

212

213

214

215

216

< Table 1 >

< DT-E70 Setting for channel 7 >

< Table 2 >

Indication on YC-900

(clip terminal)

201/217

202/218

203/219

204/220

205/221

206/222

207/223

208/224

Rosette's hard-wired

station No. (L3, L4)

217

218

219

220

221

222

223

224

Indication on YC-900

(clip terminal)

209/225

210/226

211/227

212/228

213/229

214/230

215/231

216/232

Rosette's hard-wired

station No. (L3, L4)

225

226

227

228

229

230

231

232

-10-

Connection diagram

HF-250M

6-pin modular jack

type rosette

(4-conductor)

6-pin modular jack type

rosette (4-conductor)

BX-610/620

HF-250M

YC-900

[CH6]

HF-250M

6-pin modular jack type

rosette (4-conductor)

YC-900

[CH7]

6-pin modular jack

type rosette

(4-conductor)

-11-

Table des matières

Autres manuels Toa Système d'interphone

Manuels Système d'interphone populaires d'autres marques

Bticino

Bticino LINEA 3000 Manuel utilisateur

MSI

MSI MSI-140 Manuel utilisateur

golmar

golmar Stadio Plus Manuel utilisateur

CyberData

CyberData 011211 series Manuel

Vidos

Vidos duo M1021 Manuel utilisateur

Vimar

Vimar ELVOX 7539/E Manuel utilisateur

SSS Siedle

SSS Siedle BTSV 850-03 Manuel utilisateur

Dahua

Dahua VTO Series Manuel utilisateur

Elvox

Elvox 5651 Manuel utilisateur

Videx

Videx VIDEOKIT Series Manuel utilisateur

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuel utilisateur

Viking

Viking E-35-EWP Manuel utilisateur

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuel utilisateur

SSS Siedle

SSS Siedle BFCV 850 Series Manuel utilisateur

GRD

GRD MAX V2 Manuel utilisateur

Alecto

Alecto ADI-250 Manuel utilisateur

Aiphone

Aiphone IE-8MD Manuel utilisateur

Perel

Perel EDB4 Manuel utilisateur