Toa 9000M2 Series Manuel utilisateur
9000M2 Series
Quick Start Guide
- Audio Distribution-
House of Worship
1/37
System Overview
9000M2 Series Mixer Amplifier and audio devices are installed in a rack room. When an event is
held in the Fellowship Hall, Mixer and Wireless tuners are installed temporary.
If there are too many people and more people cannot enter in the Fellowship Hall, the Hall
sound can be also listened to in Classroom1, 2. The sound of Classroom1 is broadcast in
Classroom2 and the sound of Classroom2 is broadcast in Classroom1. In each area, output
volume is adjustable by remote controllers on the wall.
System Components
1．A-9060DHM2 x 1
2．ZM-9012 x 3
3．ZM-9014 x 3
4．D-001T x 3
5．T-001T x 2
6．RC-001T x 1（with AD-246）
7．WT-5800 x 5
8．WM-5220 x 4
9．WM-5320H x 1
10．DVD x 2
11．MIXER x 1
12．P-9060DH x 1
13．DA-500F-HL x 1
14．BS-678
15．H-1
16．HX-5B
17．F-1300BT
Setting
Input 1 (D-001T): MIXER Out
Input 2 (D-001T): Blank
Input 3 (D-001T): WT-5800 for Room 2
Input 4 (D-001T): DVD for Room 2
2/37
Input 5 (D-001T): WT-5800 for Room 1
Input 6 (D-001T): DVD for Room 1
Output 1 (A-9060DHM2): Rectory
Output 2 (A-9060DHM2): Outside Entrance
Output 3 (P-9060DH): Classroom 1
Output 4 (P-9060DH): Classroom 2
Output 5 (DA-500F-HL): Fellowship Hall
Output 6 (A-9060DHM2): Webcast / Recording / Broadcast
Remote out (RC-001T): ZM-9012[0] >> ZM-9012[1] >> ZM-9014[2] >>
ZM-9014[3] >> ZM-9014[4] >> ZM-9012[5]
Button Configuration
ZM-9012[0] : Rectory
Changing the output volume.
ZM-9012[1]: Outside Entrance
Changing the output volume.
ZM-9014[2]: Classroom 1
Button 1: Input 5 – Output 3
Button 2: Input 6 – Output 3
Button 3: Input 3, 4 – Output 3
Button 4: Input 1 －Output 3
Volume: Output 3
ZM-9014[3]: Classroom 2
Button 1: Input 3 – Output 4
Button 2: Input 4 – Output 4
Button 3: Input 5, 6 – Output 4
Button 4: Input 1 －Output 4
Volume: Output 4
3/37
ZM-9014[4]: Fellowship Hall
Button 1: Input1 – Output .5, 6.
Button 2: Input1 – Output 1,5,6.
Button 3: Input1 – Output 5.
Volume: Output 5.
ZM-9012[5]:
Changing the input volume.
4/37
Configuration
5/37
Configuration
5/37
1. The following is the initial setting wizard screen.
2. Click “ New File” on the Start Menu window.
6/37
3. Set module configurations.
4. Select the modules to be inserted into the amplifier’s slots from the pull-down menu in the
Module field.
7/37
5. Select a module for each Slot. At the same time, please name each channel (ex. “MIC1”).
Main Frame Name 1 >> “RECTORY” Name 2>> “OUTSIDE”
Slot #1 >> D-001 Name 1 >> ”MIXER” Name 2 >> ”-”
Slot #2 >> D-001 Name 1 >> ”MIC2” Name 2 >> ”DVD2”
Slot #3 >> D-001 Name 1 >> ”MIC1” Name 2 >> ”DVD1”
Slot #4 >> None
Slot #5 >> T-001 Name 1 >> ”CLASS1” Name 2 >> ”CLASS2”
Slot #6 >> T-001 Name 1 >> ”HALL” Name 2 >> ”OPTION”
Slot #7 >> None
Slot#8>>RC-001
6. Click the “NEXT” button when finished.
8/37
7. The following window is for setting devices connected to REMOTE VOLUME terminal on
9000M2 rear panel. If you do not use ZM-9001, ZM-9002 or ZM-9003, select “NONE” from the
combo box “TYPE”.
8. In this “Audio Distribution “application, select NONE both REMOTE VOL1 and REMOTE VOL
2.
9/37
9. Click “FINISH” button.
10. Setting for Remote Controller: ZM-9011/9012/9013/9014.
10/37
Autres manuels pour 9000M2 Series
5
Autres manuels Toa Amplificateur
Toa
Toa MA-725F Manuel utilisateur
Toa
Toa KD-2 Mode d’emploi
Toa
Toa A-903MK2 Manuel utilisateur
Toa
Toa M-9000 Manuel utilisateur
Toa
Toa DA-250D CE Manuel utilisateur
Toa
Toa P-912MK2 Manuel utilisateur
Toa
Toa BG-2035 Manuel utilisateur
Toa
Toa IP-450D Manuel utilisateur
Toa
Toa BG-220 Instructions d'utilisation et d'installation
Toa
Toa IP-300D Manuel utilisateur
Toa
Toa WA-Z100SD AS Manuel utilisateur
Toa
Toa 800D Series Manuel utilisateur
Toa
Toa P-3248D-AS 1 Manuel utilisateur
Toa
Toa A-2060 CE-GB Manuel utilisateur
Toa
Toa P-906MK2 Manuel utilisateur
Toa
Toa BG-115 Manuel utilisateur
Toa
Toa M-9000M2 Manuel utilisateur
Toa
Toa BG-10 Manuel utilisateur
Toa
Toa A-230 HV Manuel utilisateur
Toa
Toa BG-2120 Manuel utilisateur
