TM Electronics ThermoBarScan Manuel utilisateur
1
ThermoBarScan
TM Electronics UK Ltd
INSTRUCTION BOOKLET
2
PC Setup
Installing the Software –What you need
TME Software CD
Bluetooth dongle
(we recommend the Belkin dongle with Widcom stack)
OR
Bluetooth enabled PC or laptop
How to install your TME software
If you need to install a Bluetooth dongle, please install this before
installing the software CD.
Place the CD into the CD drive of your PC or laptop.
The CD should ‘Autorun’ and install. If not, please select ‘setup’ and
follow these instructions-
Click ‘next’ to install the software
You will then be asked to install the software to C drive directory under
‘C:\Program Files\TME’ - click ‘next’ to accept this.
The TME software will automatically create a shortcut icon on your
desktop so the software can be easily accessed.
Start the ThermoBarScan software by clicking on the desktop icon
3
Switching your ThermoBarScan
instrument into Bluetooth Mode
(For USB version please skip to USB SETUP)
Turn on your ThermoBarScan instrument and press the Bluetooth
Button, the word BLUE will be displayed in the top right hand corner.
This means that the instrument is now in Bluetooth mode and ready to
connect to your TME software. The instrument must remain with the
Bluetooth enabled (showing ‘BLUE’) during discovery and
communication.
To disable Bluetooth mode, simply press the Bluetooth button again.
4
Discovering your instrument
Select the Discovery tab and then Click Here to Start
Discovery and Select Instrument
The instruments within Bluetooth range and previously
connected instruments will be displayed and their
Bluetooth addresses shown. The software will try to
connect to each in turn, retrieving their name and serial
number, these will be marked as ‘Found’. If the connection
isunsuccessful, the instrument will be marked ‘Not
Found’. To connect with your chosen instrument, select
the Bluetooth address.
The instrument will automatically connect. There is no
need to select the Connect button unless you wish to re-
connect.
To swap between ThermoBarScan devices, simply click on
another instrument.
5
Pairing your instrument to a TME
Bluetooth Printer
You are able to print data (print header, time, date, temperature and barcode
information) directly from your instrument to a TME Bluetooth Printer. To do
this, you must firstly pair the two devices-
Discover the instrument and printer you wish to pair in the software.
When discovered, highlight the address of the instrument and printer and
press Link Printer to Instrument. This will pair the two devices together. To
check that the devices are paired, click the Read Printer Linked to
Instrument. The printer address will appear in the field below to indicate that
the devices are paired.
The devices are now ready for use.
Note: you can create a print header in the Setup tab.
Printing from your paired instrument and printer
You have the option of printing either the last reading or all data from the
instrument.
To print single data, firstly ensure that you printer is on and instrument is in
Bluetooth mode.
Press the Scale (SCL) button on the instrument. You will find that the display
will show the letter S release the button
The printer will print out your latest scan data
To print all data, press and hold the Scale (SCL) button. You will find that the
display will change from the letter S (single) to the letter A (all)
The printer will print out all your data.
6
USB Setup
Click on the USB tab.
Turn instrument on and connect to computer with the cable provided.
Press the Bluetooth button. ‘USB’ will appear on display.
Click on the Discover Serial Ports Button.
Select the appropriated ‘USB Serial Port’ and the instrument will
automatically connect. The Name and Serial Number will be displayed.
7
Setting instrument parameters
Using the TME software, under Setup tab, you are able to set the
instrument’s parameters. These are:
1. Set Time and Date –the time and date is read from your PC. To set
the time and date, select Read Time/Date and then Set Time/Date to
System
2. Set Sensor Type –sets the thermocouple type e.g. K/T
3. Set Temperature Scale –sets the temperature scale e.g. °C / °F
4. Set Instrument Name –allows you to identify the instrument with its
own specified name
5. Set Print Header –allows you to assign a heading for the print
reports when using the Bluetooth Printer
Other features include:
Autoswitch on? –allows you to check to see if the autoswitch on/off
function has been enabled
Battery power? –allows you to monitor battery life
Once you have set your parameters, you can check that the settings have been
stored by using the Read functions. The instrument is now ready for use.
8
To generate Barcodes
There are a number of websites offering free utilities to convert text into
Barcodes. We recommend using the following website which will give you a
step-by-step guide for generating your barcodes:
www.barcodesinc.com/generator/index.php
Your MM7000-2D instrument can read both 1D and 2D barcodes in the
following barcode formats:
All UPC/EAN/JAN Codes
EAN28 Codes
Code 39, Code 128
Interleave 25
PDF417
QR Code
Data Matrix
GS1-DataBarTM
RSS, RSS Limited. RSS-14
RSS-14 Stacked, RSS-Expand
For generating 2D or QR Codes:
https://www.barcodesinc.com/generator/qr/
Alternatively many office products now come with a Barcode font. Please
note that your MM7000-2D instrument can read a 1D barcode with a
maximum of 32 characters including spaces.
You can generate the barcodes yourself or use the print barcode tab in the
software if you have the TME Barcode printer.
9
To take a reading
The new 1D and 2D scanner can read barcodes on virtually any medium –
paper, plastic cards, mobile phones and LCD displays.
To take a reading, connect a thermocouple sensor to the top of the
instrument and wait for the temperature reading to stabilize. Once the
reading has stabilized, press the Scan button.
This will activate the Barcode Scanner and freeze the temperature
measurement.
Scan the barcode, when read the instrument will Bleep.
When the Barcode has been read the temperature, Barcode information,
Date and Time will be logged to the internal memory. Up to 1000 readings
can be stored on the instrument.
Whilst in SCAN mode the instrument will show the total number of readings
taken at the top of the instrument display. After scanning, the display will
revert to showing the time and temperature.
If the scanner is unable to read a barcode, it will automatically time-out after
30 seconds.
To cancel the Scanner
To cancel the scanner, simply press the Scan button again.
10
To Retrieve the information
Use the software to discover and connect as before.
When connected select the Download Data tab and then select the Get
Data button.
The data stored on the instrument will then appear as a numbered list.
Other functions within the Download Data tab
1. Clear Screen Data –clears downloaded data from software
2. Latest scan –displays the latest scan
3. Live data –displays the instruments data in real time (scan no,
serial number, time, date temperature, temperature scale, alarms,
barcode)
4. Clear instrument –clears all data stored within the instruments
memory
5. Print preview –allows you to preview your data before printing
6. Print setup –allows you to set up your print
7. Print –print data directly from software
8. Save Data –saves your data as a ‘CSV’ file
Table des matières
Manuels Lecteur de codes-barres populaires d'autres marques
POSMicro
POSMicro Datalogic PowerScan D7100 Manuel utilisateur
Marson
Marson MT780 Guide de configuration rapide
NCR
NCR RealPOS Manuel utilisateur
Motorola
Motorola SE3300 Guide de configuration rapide
Element
Element P130BT Manuel utilisateur
Motorola
Motorola Symbol LS3008 Manuel d'installation et d'exploitation
