Status for monitoring the status of the decoder
CI
CAM Name: display the CAM name in Slot1 and Slot2
Setup: under this sub menu, you can see all program names from the tuner. All
free programs are marked with ‘Free’ in the first row.
To select which program to be de-encrypted, press the <↑> or <↓>-key to roll
up and down the program names and press <ENTER>-key to change the status
of the corresponding program (only encrypted program could be selected).
Three different statuses could be set:
Slot 1 (de-encrypted with upper CAM inserted)
Slot 2 (de-encrypted with lower CAM inserted)
Bypass (no de-encryption).
The status will be shown in the first row on the LCD display. Confirm this setup
when leaving this sub menu, press <ENTER>-key to save or press <EXIT>-key
to scrap.
Output
Decoder
Program: under this sub menu, you will see all program names from Tuner.
Use the <↑> or <↓>-key to roll up or down between the program names. A few
seconds after the program being selected, the A/V signal will be delivered to the
related connectors on the back panel.
Video: You can configure the video parameters of programs in this submenu.
Press the <ENTER>-key to confirm and press the <EXIT>-key to cancel.
Video Standard: you can select Auto or 576i 25 or 480i 29.97 or 576p 50 or
480p 60 or 720p 50 or 720p 59.94 or 720p 60 or 1080i 25 or 1080i 29.97 or
1080i 30 for the composite video output.
Screen: select the screen mode: Auto, 4:3 Full, 16:9 Full or 4:3 Letterbox.
DVB Subtitle Lang: select the language of DVB Subtitle.
EBU Subtitle Lang: select the language of EBU Subtitle.
Subtitle Priority: configure the priority of Subtitle; choose whether DVB or
EBU should be first.
Fail Mode: set display method on TV when there is no vedio. you can select
Black screen, Still picture, or No sync
Close Caption：Select ‘OFF’ will turn off the caption and select ‘ON’ will
turn on the caption.
VBI Mode：Select ‘DISABLE’ will disable the VBI mode and select
‘ENABLE’ will enable the VBI mode.
CVBS SUB PAL: set the subtile of CVBS port in PAL standard. You can set
to PALBDGHI or PALN or PALN_C or SECAM
CVBS SUB NTSC: set the subtitle of CVBS port in NTSC standard. You can
set to NTSCM or NTSCM_J or NTSCM_443 and PALM
Audio: You can configure the audio settings in the submenu.
