3
Instruction: sossms+123456
Turn off SOS SMS function:
Instruction: nosossms+123456
4. Set GMT Time zone number:
Instruction: time zone+123456+space+GMT No. For example, Finland is GMT+2 zone, so user can set: timezone123456 +2.
Then GPS tracker will be adjusted to be the right time zone “Time OK”
5. Inquire location
5.1 Inquire Location by call
If you have set an admin phone number, you can call GPS tracker and get location SMS, but phone number which has not been
registered can’t inquire location SMS. If you haven’t set admin phone number, any phone number can be used to inquire location
SMS.
When you use admin number to call GPS tracker, the GPS tracker will remind you “the phone number you call is busy”,
then you can hang up the call, the GPS tracker will send a location SMS to you automatically soon like follow:
Google link：if you can use your smart phone to open this map link, it means the GPS tracker works well, vice versa.
V:A means GPS tracker has found GPS signal successfully；V:V means no GPS signal.
1. 2014-04-18 02:17:53 The last tracking time
2. S:000km/h means GPS tracker moving speed.
3. Bat：80% means battery status
4. ID:4102000759 means GPS tracker ID（Which can be used to login into GPS CMS andAPP）
Notice: When the GPS signal is not strong enough, the GPS tracker can’t locate successfully, the GPS tracker will use
the last longitude and latitude information. If you find the location SMS show you a wrong address, please check the time in location
SMS. So that you can know where is the last tracking.
5.2 Inquire Location by SMS
Instruction: G+password# or Where
User can send G123456 or Where to GPS tracker, then user can receive a SMS with tracker’s longitude and latitude.
6. Listen-in function
GPS tracker has two modes: one is tracking mode, the other mode is Listen-in mode, the default setting is tracker model, so
when user call GPS tracker, a tracking SMS will be sent back, if user want to listen in GPS tracker by phone call, user has to
change the mode first by instruction “Monitor+password”, then tracker will send a SMS back “Monitor ok”, then when you
call the GPS tracker, you can listen-in what happen near the tracker.
If user want to recover to tracker mode, user can send “tracker+password”, then GPS tracker will be in tracking mode.
7. G-Fence alarm
We suggest that this setting will be set by Web GPS CMS.
User can use this function to define the working range, once the GPS tracker step out of this working range, it will send an
alarm to admin phone number.
8. Moving Alarm:
Instruction: Move+password+moving semidiameter
Put GPS tracker on desk without moving for 3-10 minutes, then send instruction to GPS tracker, the default setting distance
is 500 meters. If user want to set it to be 1000meters, user can write like “Move1234561000”, then the GPS tracker will set a
moving alarm range with 1000 meters semidiameter. User can set this function in GPS APP also.
Cancel moving alarm: nomove+password SMS reply: Nomove ok.
Notice: The moving semidiameter should be 500 meters, or more.
