TJERNLUND 1 Manuel utilisateur

HSUL-J, HS115-J & HST-J POWER VENTER SPECIFICATIONS

Performance curves

Static pressure (inches H2O) vs CFM (std. air) at selected flue gas temps.

NOTE: TO ARRIVE AT TOTAL SYSTEM STATIC PRESSURE REFER TO CURVE

AND ADD .38” TO COMPENSATE FOR VENT HOOD AND WIND RESISTANCE.

MOTOR SPECIFICATIONS

ELECTRICAL DATA

Volts 115

Hertz 60

RPM 3000

Watts 95

Amps 1.26

Therm. Prot. Yes

MECHANICAL DATA

DESCRIPTION

Shaded Pole Yes

Open Yes

Int. Fan Cooled Yes

CASING

Diameter (In) 3.33

Nom. Length (In) 4.50

SHAFT

Diameter (In) .313

Nom. Length (In) 2.25

BEARINGS

Type Sleeve

Material Sintered Iron

COMPONENT DESCRIPTION

Relay (Model HSUL-J only)

24/115V Switching Relay

Timer Relay (Model HST-J only)

Dual Voltage 24/115V input, 1-10 minute post

purge adjustment

Fan Proving Switch (All Models)

3 FLA, 18LRA @ 120V

MODELS AND APPLICATION:

HSUL-J (Gas)

Used as a means of Side Wall Venting 24 volt

controlled appliances. This Power Venter

includes a 24/115 volt switching Relay and a

Fan Proving Switch.

HS115-J (Gas)

Used as a means of Side Wall venting 115 volt

appliances. This Power Venter DOES NOT

include a Switching Relay but still includes the

Fan Proving Switch.

HST-J (Oil or Gas)

Used as a means of Side Wall Venting 24 volt

or 115 volt controlled appliances which require

a Post Purge cycle. This Power Venter

includes a Post Purge Timer Relay and a Fan

Proving Switch.

Note: Tjernlund Products, Inc. reserves the

right to make changes to specifications without

notification.

-SIDE VIEW- -END VIEW- -PLAN VIEW-

P/N 8506001

REV. 1 11/94

TJERNLUND PRODUCTS, INC.

1601 Ninth Street • White Bear Lake, MN 55110-6794

PHONE (800) 255-4208 • (651) 426-2993 • FAX (651) 426-9547

Visit our web site • www.tjernlund.com

HSUL-1, HS115-1 & HST-1 POWER VENTER SPECIFICATIONS

Performance curves

Static pressure (inches H2O) vs CFM (std. air) at selected flue gas temps.

NOTE: TO ARRIVE AT TOTAL SYSTEM STATIC PRESSURE REFER TO CURVE

AND ADD .38” TO COMPENSATE FOR VENT HOOD AND WIND RESISTANCE.

MOTOR SPECIFICATIONS

ELECTRICAL DATA

Volts 115

Hertz 60

RPM 3000

Watts 166

Amps 1.51

Therm. Prot. Yes

MECHANICAL DATA

DESCRIPTION

Shaded Pole Yes

Open Yes

Int. Fan Cooled Yes

CASING

Diameter (In) 3.33

Nom. Length (In) 4.50

SHAFT

Diameter (In) .313

Nom. Length (In) 2.25

BEARINGS

Type Sleeve

Material Sintered Iron

COMPONENT DESCRIPTION

Relay (Model HSUL-1 only)

24/115V Switching Relay

Timer Relay (Model HST-1 only)

Dual Voltage 24/115V input, 1-10 minute post

purge adjustment

Fan Proving Switch (All Models)

3 FLA, 18LRA @ 120V

MODELS AND APPLICATION:

HSUL-1 (Gas)

Used as a means of Side Wall Venting 24 volt

controlled appliances. This Power Venter

includes a 24/115 volt switching Relay and a

Fan Proving Switch.

HS115-1 (Gas)

Used as a means of Side Wall venting 115 volt

appliances. This Power Venter DOES NOT

include a Switching Relay but still includes the

Fan Proving Switch.

HST-1 (Oil or Gas)

Used as a means of Side Wall Venting 24 volt

or 115 volt controlled appliances which require

a Post Purge cycle. This Power Venter

includes a Post Purge Timer Relay and a Fan

Proving Switch.

Note: Tjernlund Products, Inc. reserves the

right to make changes to specifications without

notification.

-SIDE VIEW- -END VIEW- -PLAN VIEW-

TJERNLUND PRODUCTS, INC.

1601 Ninth Street • White Bear Lake, MN 55110-6794

PHONE (800) 255-4208 • (651) 426-2993 • FAX (651) 426-9547

Visit our web site • www.tjernlund.com

HSUL-2, HS115-2 & HST-2 POWER VENTER SPECIFICATIONS

Performance curves

Static pressure (inches H2O) vs CFM (std. air) at selected flue gas temps.

NOTE: TO ARRIVE AT TOTAL SYSTEM STATIC PRESSURE REFER TO CURVE

AND ADD .38” TO COMPENSATE FOR VENT HOOD AND WIND RESISTANCE.

MOTOR SPECIFICATIONS

ELECTRICAL DATA

Volts 115

Hertz 60

RPM 3300

Watts 166

Amps 1.51

Therm. Prot. Yes

MECHANICAL DATA

DESCRIPTION

Perm. Split Cap Yes

Open Yes

Int. Fan Cooled No

CASING

Diameter (In) 3.33

Nom. Length (In) 4.50

SHAFT

Diameter (In) .313

Nom. Length (In) 2.25

BEARINGS

Type Sleeve

Material Sintered Iron

COMPONENT DESCRIPTION

Relay (Model HSUL-1 only)

24/115V Switching Relay

Timer Relay (Model HST-1 only)

Dual Voltage 24/115V input, 1-10 minute post

purge adjustable

Fan Proving Switch (All Models)

3 FLA, 18LRA @ 120V

MODELS AND APPLICATION:

HSUL-2 (Gas)

Used as a means of Side Wall Venting 24 volt

controlled appliances. This Power Venter

includes a 24/115 volt switching Relay and a

Fan Proving Switch.

HS115-2 (Gas)

Used as a means of Side Wall venting 115 volt

appliances. This Power Venter DOES NOT

include a Switching Relay but still includes the

Fan Proving Switch.

HST-2 (Oil or Gas)

Used as a means of Side Wall Venting 24 volt

or 115 volt controlled appliances which require

a Post Purge cycle. This Power Venter

includes a Post Purge Timer Relay and a Fan

Proving Switch.

Note: Tjernlund Products, Inc. reserves the

right to make changes to specifications without

notification.

-SIDE VIEW-

-END VIEW- -PLAN VIEW-

TJERNLUND PRODUCTS, INC.

1601 Ninth Street • White Bear Lake, MN 55110-6794

PHONE (800) 255-4208 • (651) 426-2993 • FAX (651) 426-9547

Visit our web site • www.tjernlund.com

Autres manuels pour 1

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels TJERNLUND Ventilateur

TJERNLUND

TJERNLUND V1, V1D, V2D CRAWL SPACE VENTILATORS 8504129 Manuel utilisateur

TJERNLUND

TJERNLUND DB-2 DUCT BOOSTER 8504030 REV B 0900 Manuel utilisateur

TJERNLUND

TJERNLUND SS2G SIDESHOT (DISCONTINUED) 8504075 REV 1... Manuel utilisateur

TJERNLUND

TJERNLUND HS-5 Manuel utilisateur

TJERNLUND

TJERNLUND DRYER DUCT BOOSTER LB2 Manuel utilisateur

TJERNLUND

TJERNLUND CS1 Manuel utilisateur

TJERNLUND

TJERNLUND HS-3C CANADIAN 8504002 REV 2 0997 Manuel utilisateur

TJERNLUND

TJERNLUND SS2 SIDESHOT WITH UC1 UNIVERSAL CONTROL (VERSION X.04) 8504105 REV B... Manuel utilisateur

TJERNLUND

TJERNLUND DC BAROMETRIC DRAFT CONTROL LIT 8500490 REV B... Manuel utilisateur

TJERNLUND

TJERNLUND HSJ Guide de l'utilisateur

TJERNLUND

TJERNLUND HSJ Manuel utilisateur

TJERNLUND

TJERNLUND SIDESHOT SS2 Manuel utilisateur

TJERNLUND

TJERNLUND UC1 Manuel utilisateur

TJERNLUND

TJERNLUND VP-2, VP-3 8500567 0702 Manuel utilisateur

TJERNLUND

TJERNLUND WHKI MILLIVOLT APPLIANCE INTERLOCK (RECOMMEND WHKE FOR USE WITH UC1) 8504055 REV 3... Manuel utilisateur

TJERNLUND

TJERNLUND DSF2B Manuel utilisateur

TJERNLUND

TJERNLUND SS1 SIDESHOT WITH UC1 UNIVERSAL CONTROL (VERSION X.04) 8504102 REV C... Manuel utilisateur

TJERNLUND

TJERNLUND DRAFT INDUCER DJ-3 Manuel utilisateur

TJERNLUND

TJERNLUND SIDESHOT SS1C INCREASED CAPACITY OIL VENT SYSTEM... Manuel utilisateur

TJERNLUND

TJERNLUND SS2 SIDESHOT (DISCONTINUED VERSION-PRE UC1 UNIVERSAL CONTROL) 8504063 REV B... Manuel utilisateur

TJERNLUND

TJERNLUND AIRESHARE AS2 Manuel utilisateur

TJERNLUND

TJERNLUND DB2 DUCT BOOSTER Manuel utilisateur

TJERNLUND

TJERNLUND Cool Breeze CB14 Manuel utilisateur

TJERNLUND

TJERNLUND Duct Booster RB10 Manuel utilisateur

Manuels Ventilateur populaires d'autres marques

ELTA FANS

ELTA FANS H03VV-F Manuel utilisateur

Hunter

Hunter 20714 Manuel d'instructions

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manuel utilisateur

Hunter

Hunter Caraway Manuel d'instructions

Panasonic

Panasonic FV-15NLFS1 Manuel utilisateur

Kompernass

Kompernass KH 1150 Manuel utilisateur

VES

VES FALA100/12V/TR Manuel utilisateur

Vertiv

Vertiv Liebert DCD Manuel utilisateur

Westinghouse

Westinghouse GFP Series Manuel utilisateur

Venmar

Venmar KUBIX HRV PLUS Series Manuel utilisateur

Maico

Maico ECR 31 Manuel utilisateur

Sonnenkonig

Sonnenkonig Dinky Manuel utilisateur

S&P

S&P ECOWATT HXBR Manuel utilisateur

Wider

Wider IMP03369BH Manuel utilisateur

Panasonic

Panasonic F-60DHN Manuel utilisateur

Hinkley

Hinkley HIGHLAND Manuel utilisateur

Broan

Broan 766BN Manuel utilisateur

Premium

Premium PFS16022 Instructions de montage