Titan TX500 Manuel utilisateur
TX500
Instruction Manual
Digital Satellite Receiver
For receiving free-to-air channels.
2
INTRODUCTION
This User Manual will help you to operate your Satellite Receiver in a safe
manner while enjoying all the features and benefits it provides for your
entertainment
The instructions contained in this User Manual assume that the user of the
Satellite Receiver already has a basic general knowledge on how to operate
entertainment electronic devices
This User Manual must be read by every person that is:
•Installing
•Connecting
•Operating
•Cleaning
•Disposing of this Satellite receiver
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC DEVICES
The disposal of used Electrical and electronic devices must be conducted in
accordance with the rules and regulations of the European Union (EU) and that
of other European Countries
All products that are marked either directly or labelled on their packaging with
the following icon:
can not be disposed of through the normal household waste channels. These
products must be disposed of through specialised collection centres for the
recycling of electric and electronic devices
By disposing of this product as required by law, you are contributing to the
protection of the environment and the health of your fellow human beings
Incorrect disposal can be dangerous to human health and hazardous to the
environment
3
Table of contents
Introduction 2
Disposal of used electrical devices 2
Table of Contents 3
1 Explanation of the device 5
1.1 Front side of the receiver 5
1.2 Backside of the receiver 6
1.3 Remote control 7
Safety precautions 8
The right location 9
2 Operating the receiver 10
2.1 Turning on the receiver 10
2.2 Standby Mode 10
2.3 Switching channels 10
2.4 Volume adjustment 10
2.5 Channel number 11
2.6 Mute (Turning sound off) 11
2.7 Adjusting the channel sound 11
2.8 Switching between TV and radio 11
2.9 TXT (teletext) 11
2.10 SUB (subtitle) 11
2.11 EPG (Electronic Program Guide) 12
2.12 LAST 13
2.13 Channel list 13
2.14 Switching satellites 13
2.15 Information 13
2.16 Changing the screen mode 13
2.17 Favorite list 14
2.18 Sleep timer 14
3 Menu 15
Menu structure 15
3.01 Editing channels 16
3.1 TV program list 16
3.1.1
Favorites 17
3.1.2
Locking channels 17
3.1.3
Skipping channels 17
3.1.4
Moving channels 18
3.1.5
Changing channels 18
3.2 Radio program list 18
3.3 Delete all (channels) 18
4
4 Installation menu 19
4.1 Antenna connection 19
4.2 Satellite list 19
4.3 Antenna settings 20
4.4 Searching single satellites 21
4.5 Searching multiple satellites 21
4.6 TP list (transponder) 22
5 System menu 23
5.1 Language 23
5.2 TV settings 23
5.3 Time settings 24
5.4 Timer settings 24
5.5 Parental lock (passwords) 25
5.6 OSD settings 25
5.7 Favorites 25
5.8 Miscellaneous (LNB supply, channel display) 25
6 Miscellaneous 26
6.1 Information 26
6.2 Default settings 26
6.3 Upgrade via satellite (software) 26
7 Games 27
7.1 Tetris 27
7.2 Othello (Reversi) 27
8. Disassembly 28
9 Trouble-shooting 29
10 Specifications 31
Warranty 32
Declaration of Conformity 32
Glossary 33
5
1. Explanation of the device
1.1 Front side of the receiver
1 POWER button Turning on the device or switching to standby mode.
2 ▼button Switching channels backwards.
3 ▲button Switching channels forward.
4 LED POWER LED illuminates during normal and standby
operation.
5 LED LOCK LED illuminates if signal is strong enough.
6 IR Infrared receiver for signals from remote control.
7 Standby Standby indicator
6
1.2 Back side of the receiver
1 LNB IN LNB port for antenna cable.
2 LNB OUT LNB port for analogue SAT receiver (Loop-in
operation during standby only).
3 Audio Stereo Sound Output, for connecting a stereo
system.
4 TV SCART SCART connection for TV.
5 Mains cable Mains cable 230V.
6 COAXIAL Digital coaxial audio output.
7
1.3 Remote Control
1. Sound on/off Mutes the sound. Press again to turn on
sound.
2. On/Off (Standby) Press to turn off the receiver or to
switch to Standby.
3. Audio – Select sound channel Displays all available
sound channels.
4. TV/ radio operation Press once to switch between TV
or radio operation.
5. Number buttons 0 - 9 Use these buttons to switch to a
certain channel or to enter numeric values or to change
channel names and favorite lists.
6. Teletext/Videotext To display teletext or videotext
pages.
7. Subtitles To display subtitles.
8. MENU – OSD display menu To enter display menu,
with the help of which you can edit all receiver and
channel settings.
9. EXIT – Exit menu To close the current OSD menu and
to display the higher-level menu or full screen.
10. EPG – Program information To display the EPG
(Electronic Program Guide).
11. LAST To switch between the current and last viewed
program.
12. Control buttons: Channel/Switching programs To
navigate through the OSD menu (up/down) or to switch
channels in ascending and descending order.
13. Control buttons VOL/ volume adjustment To
navigate through the OSD menu (left/right) or to adjust
the volume.
14. OK/ confirmation button Press OK to confirm or
execute an action. • To display program list.
15. / 17. PG-/PG+ - program list up and down To
browse pages in program, favorite or other lists.
16. Function key i To display program information;
multi-function key during OSD operation.
18. Function key
19. FAVOR (White) Favorite programs.
20. Mode To set the screen format.
8
Safety precautions
Before operating the receiver, please read thoroughly the following safety
precautions
You are required to read all the notes, instructions and warnings contained in
this User Manual
Basic safety precautions
Connecting to the mains
·During disturbances unplug the receiver from the mains.
·To avoid the risk of fire and electric shock do not expose the receiver to rain or other
humidity.
·Never open the housing. Otherwise there is the risk of electric shock.
·Only connect the receiver to a properly installed 100-240V, 50-60 Hz mains socket.
· The total power input at the LBN IN antenna socket of the receiver must not
exceed 500mA.
· In case of non-use of the appliance for a longer period of time, please
disconnect the plug from the mains. Only pull at the plug, not at the cable.
· Disconnect the plug from the mains during thunderstorms.
· If objects or liquids enter the receiver, immediately pull the plug. Refer the
appliance to qualified service personnel before using it again. Otherwise there is
a risk of electric shock.
· Please make sure that the power supply (socket) is easily accessible.
· Do not bend or squeeze the mains cable.
· If the mains cable is damaged, you have to refer the receiver to qualified
service personnel for repair before using the receiver again. Otherwise there is
the risk of electric shock.
· Do not allow children to use the receiver without supervision or to play with the
antenna appliance.
· Always refer maintenance to qualified service personnel. Otherwise you
endanger yourself and others. Purchase spare parts from the manufacturer only.
9
The right location
Place the receiver on a stable, even surface.
Avoid placing it near:
Heating sources, like radiators,
Naked flames, like candles,
Devices with strong electromagnetic fields, like speakers.
Do not place objects filled with liquids (such as vases) on the receiver.
· Avoid direct sunlight and exceptionally dusty places.
· Never cover the ventilation openings. Ensure sufficient ventilation of the
receiver.
· Do not place heavy objects on the receiver.
· Humidity can occur inside when moving the receiver from a cold to a warm
place. In this case, wait for about 1 hour before operating the unit.
Run the antenna cable so that no one can step on or stumble across it.
10
2. Operating the receiver
Use the buttons CH▲, CH▼, VOL►and VOL◄to navigate through the menus.
Selected menu items are marked. Confirm the selection with OK button. Press
EXIT or MENU button to return to previous menu or to exit main menu. Changes
require additional confirmation. The use of the number buttons in the submenus
is moreover necessary.
Example: Set receiver to daylight saving time.
MENU button, select system settings, select time settings, OK button, select
time, OK button. Under GMT select UTC difference of +1:00. If necessary, set
daylight saving time to "On". Press EXIT to close the menu.
2.1 Turning on the receiver
Press On/Off (Power) to turn on the unit.
2.2 Standby mode:
When pressing the "Power" button, receiver will switch to standby mode. Press
"Power" once more to turn the unit on again.
To completely turn off the unit, unplug the mains cable.
2.3 Switching channels
Use CH▲, CH▼buttons to switch channels during radio or TV mode.
2.4 Volume adjustment
Use VOL◄, VOL►buttons to adjust the volume during radio or TV mode.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Titan Récepteur
