Titan Rejuv 4D Manuel utilisateur
SAVE THESE INSTRUCTIONS
OPERATION INSTRUCTIONS
Rejūv 4D
MASSAGE CHAIR
02-04
05
06-07
08-09
10-16
17-31
31-32
33
34
35
CONTENTS
Maintain
Cleaning and Maintenance
Important
Troubleshooting
Product Specifications
Before use
Safety precautions
Installation parts
Place massage chair
Before use
Product structure
Usage method
Operation Instructions
Massage close
01
Thank you for purchasing this product. Please read this manual instruction carefully
in order to know how to use this product correctly before operation. Please pay more
attention to some important safety warning and keep this manual book properly for
future use.
Note: Our company reserves the right to change and explain the design of the
product. If there is some difference between the product function in market
circulation and the description in the manual, it is a normal update of the product,
and our company will not inform you otherwise. The specific product function and
color shall prevail in kind.
03
02
Safety Precautions must be observed Safety Precautions must be observed
Warning Indicates that serious injury or death may result from
improper use.
■Please pay attention to the symbol before each safety item.
Forbidden
■Please read all relevant instructions carefully before use.
■The notes marked here will help you to use the product safely and correctly.
■In order to clearly indicate the extent of harm and damage, precautions are
divided into "Warning" and "Caution" that may be caused by incorrect use.
Both of them are important for safety and must be followed.
Caution Indicates that misuse may cause minor injury or property
damage.
Absolute prohibition
The following populations should not use this product
Important safety warnings
■Do not allow children to touch any movable part of this product.
■Use the well-grounded power supply unit suitable for this product.
■Pull out the plug after use or before cleaning to avoid any physical
injury or damage to the product.
■Operate this product as instructed in this manual.
■Do not use any parts or accessories which are not recommended.
■Do not use this product outdoors.
■Please read the Operation Instructions carefully before operation.
■Never use this product for any other purpose not listed herein.
■20 minutes of usage each time is recommended.
■Do not use this product if the cover or leather is broken or
damaged.
■Do not drop anything into this product.
■Never fall asleep while using this product.
■Do not use this product if you are drunk or feel unwell.
■Do not use this product within one hour after a meal.
■Do not use this product with excessive force to avoid any injury.
Storage conditions
■Storage room temperature: 41°F to 104°F.
■Relative humidity (RH) between 20% and 80%; free of corrosive
gases, and a well-ventilated room.
Forbidden
Warnings
■Check whether voltage is consistent with the specification of this
product.
■Never insert or pull out the plug with a wet hand.
■Do not let water flow into this product to avoid electric shock or
cause damage to this product.
■Do not pull the power cord when plugging or unplugging it. Rough
handling is forbidden.
■Do not damage the wire or modify the circuit of this product.
■Do not clean live parts of this product with a wet cloth such as a
power switch and plug.
■Be away from this product in case of power failure to avoid any
injury if power is restored suddenly.
■Stop using this product at once while it works abnormal, and
consult your local supplier.
■Stop using this product if you feel unwell, and consult your health
care practitioner .
Safety precautions
Caution
Caution
■The device is not intended for use by persons (including children)
with physical disabilities, sensory or neurological impairments or
who lack experience and common sense, unless they are
supervised and instructed in the use of the device by those
responsible for their safety. Children must be supervised to ensure
they do not play with instruments.
■Patients with osteoporosis.
■Patients with heart disease or wearing electronic medical devices
such as a pacemaker.
■People who have a fever.
■Pregnant women.
■Patients who are injured or have a skin disease.
■When unsupervised, any children are under the age of 14 and
those unconscious are not allowed to use this product.
■People who are told by their physicians to have rest or who feel
unwell.
■People whose bodies are wet are forbidden to use this product.
■This product has a hot surface. Persons insensitive to heat must
pay attention when using this product.
■If the supply cord is damaged, to avoid danger, it must be replaced
by a professional from the manufacturer, its maintenance
department or similar department
0405
Installation parts
Safety Precautions must be observed
Calf mechanism installation instructions
1. Insert the cable and air pipe of the calf mechanism, respectively, into the sockets
at the front of the steel frame assembly (Figure 1).
2. After the connection is completed, open the calf mechanism fixing covers on both
sides of the steel frame assembly (Figure 2).
3. Raise the calf mechanism and put it into the slot and cover the fixing cover and
finally fix it in place with 2 M4 screws (Figure 3).
Figure 1 Figure 2
Figure 3
■This product should be maintained by the service center designated
by the manufacturer only. No user should disassemble or maintain it
without permission.
■Do not forget to turn off the main power switch after usage.
■Do not use this product if the power socket becomes loose.
■If this product will be left unused for a long period of time, it is
necessary to roll up the power cord of this product and store this
product in a dry and dust-free environment.
■Do not store this product at a high temperature or near open flame.
Avoid prolonged exposure to direct sunshine.
■Please clean this product with dry cloth. Never use thinner, benzene
or alcohol.
■The mechanical components of this product are specially designed
and manufactured, so no special maintenance is needed.
■Do not use a sharp object to stab at this product.
■Do not roll or pull this product on any uneven ground. Instead, it
should be lifted before moving.
■Please use this product intermittently. Do not keep it working
continuously for a long period of time.
Product service and maintenance
Operating environment
■Do not use this product in a very moist environment such as the
bathroom.
■Stop using this product immediately when the ambient temperature
changes sharply.
■Do not use this product in any heavily-dusty or caustic environment.
■Do not use this product in a small space or a place without good
ventilation.
■If the motor sounds during operation of this product, this is the
normal operation sound.
■If the controller cannot work normally, check whether the plug and
the power socket are connected reliably, and whether the power
switch is turned on.
■If the rated working time is over, this product will automatically
activate the power-off button; If this product keeps operating for a
long period of time, the temperature protector will stop this product
automatically. The product can be used again after half an hour.
Solutions to ordinary malfunctions
Caution
Caution
Caution
45°
0607
4.7inches
Place massage chair Place massage chair
Installation placement
CAUTION How to disassemble and use headrest cushion and backrest cushion
Move method
12
Zipper Zipper
CAUTION CAUTION
CAUTION
Make sure there is enough
space for the massage chair can
be tilted at least 4.7inches.
Do not expose the massage chair
directly to high temperature
environment due to sunlight(such
as: in front of heating equipment),
and place it to where can avoid
high temperature and direct
sunlight. It is recommended to lay
a soft cushion for long-term use in
a designated location. When laying
the cushion, the size of the
cushion should be enough to cover
Keep the range where the machine
touches the floor and the range
where your feet touch the floor.
Require team work to lift and move
the chair to avoid injury.
1. Please lift the massage chair to
move it on vulnerable ground such as
wooden floor.
2. When moving on a similar wooden
floor, it is recommended to lift it.
Avoid damage to the casters. When
the floor is lifted and moved to the
designated position, be careful to
keep your hands out of the way to
avoid injury, and be careful of your
feet being crushed. Do not let go of
the unit until the unit is completely
flat, the floor may be damaged,
therefore, it is recommended to place
mats, etc. on the floor.
Product lift instruction
Using a headrest cushion can reduce
the intensity of kneading massage on
the neck and shoulders, and you can
decide whether to use a headrest
cushion according to your needs
(recommended to use a headrest
cushion). The backrest cushion and the
backrest are connected by a zipper (1),
and the headrest cushion and the
backrest cushion are connected by a
zipper (2).
Use the rear casters to move the
massage chair.Move the chair by tilting it
down and backward about 45° as shown
in the diagram.
NOTE: Excessive force to title will cause
the chair to tip over completely and
product damage.
1.Before moving, please shut down the
machine properly to reset the whole
machine, and then cut off the power.
2.Please keep the chair vacant when
moving. (People, pets or clutter will not be
able to stay on the chair.)
3.When moving, do not cross a drop
barrier higher than 2mm or a gap greater
than 5mm.
4.When using casters to move this
product, single continuous movement is
not supported; if the distance exceeds
164ft, please make this product move
slowly and evenly.
08 09
Before use Before use
CAUTION
CAUTION
CAUTION
Check around
Make sure there are no foreign objects in the
gaps of the machine
Make sure that there are no people, pets and
other objects around the unit.
Turn on the power
Plug in power cord Schematic diagram of
power on
Turn on the power
switch ("I" position)
FUSE: T6.3A L 250V
POWER I NPUT
ON/ OF F
FUSE: T6.3A L 250V
POWER IN PUT
ON/O FF
Before massaging, make sure that
no foreign objects are caught in the
legs, feet, etc.
Under no circumstances allow
hands, feet, and head to penetrate
into the area between the lower leg
mechanism and main body, or the
area between the armrest and the
capsule.
Under no circumstances should
hands, feet, or head sink under the
fabric or leather covering of the
massage area.
Warn
■Please check the power cord and plug for damage before use.
■Please supply power to this product in accordance with the working
power requirements of this product's calibration.
■It is strictly forbidden to use a power supply other than the nominal
power supply of this product.
■It is strictly forbidden to connect various power conversion devices
without authorization to supply power to this product.
10 11
Product structure Product structure
Description of components
1
2
3
4
5
6
7
8
9
10
11
1.Head cushion
2.Remote control
3.Armrest shortcut keys
4.Health sensor
5.Leg massage unit
6.Back cushion
7.Shoulder air pressure
8.Shoulder mechanism
9.Arm air pressure
10.Armrest
11.Side cover
Schematic view of functional distribution
1
2
3
4
5
6
7
8
9
1.Shoulder:
Air sac massage
2.Arm:
Remote control holder
Mobile phone holder
USB charging port
3.Hand:
Air sac massage
4.Leg:
Air sac massage
5.Sole:
Roller massage
6.Both sides of the head:
3D digital audio Play music
7.Head and neck to bottom:
Mechanical massage
8.Waist and shoulder heating:
Heating function
9.Leg:
Air sac massage
1213
Product structure Product structure
How to use the shawl
Heating area
Heating area
Schematic diagram
of use on back and waist
Schematic diagram
of use on shoulder and abdomen
·It is provided with a unique shawl assembly, with innovative heating functions on
the shoulder, back, waist and abdomen and heating with graphene. Users can
place the shawl at different massage positions according to massage
requirements. When the shawl assembly is placed at the shoulder position, it will
heat the acupoints such as Bingfeng, Tianzong, Yunmen and Qihu around the
shoulder and clavicle by graphene heating, effectively relieving symptoms such
as scapulohumeral periarthritis and cough, and removing cold and moisture from
shoulder joints.
·When the shawl assembly is placed on the abdomen and back (dual-purpose),
through graphene heating, it plays the role of dispelling cold and relieving pain,
warming channels and removing blood stasis in the back and abdomen,
distributing Qi and blood of the back and abdomen meridian, alleviating the
symptoms such as irregular menstruation and dysmenorrhea for women, relieving
low back pain and kidney discomfort, warming intestines and stomach and
clearing intestinal cold, with a good effect on some people with deficiency of qi and
deficiency of spleen and stomach.
Product structure Product structure
I. Remote control key description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1.Display
2.On/off key
·Turn the massage chair on or off.
3.Up key
·The key for upward navigation. You can press this key to scroll up to select a
menu item or make an increase adjustment.
4.Left key
·The key for leftward navigation. You can press this key to scroll leftwards to
select an item or return to the previous menu.
5.Zero-gravity key
·Sets the zero-gravity angle to “zero-gravity I,” “zero-gravity II,” “zero-gravity III” or
“off.”
6.Sitting position raising key
·Upturns the massage chair.
7.Sitting position lowering key
·Turns down the massage chair.
8.Leg mechanism extending key
·Extends the leg mechanism.
9.Pause key
·Pause the massage or exit from pause massage
10.OK key
·Confirms or cancels the selection of a massage function.
11.Right key
·The key for rightward navigation. You can press this key to scroll rightwards to
select an item or return to the next menu.
12.Down key
·The key for downward navigation. You can press this key to scroll down to select
a menu item or make a decrease adjustment.
13.Menu key
·Enter the main menu interface.
14.Leg mechanism raising key
·Raises the leg mechanism.
15.Leg mechanism lowering key
·Lowers the leg mechanism.
16.Leg unit shrinkage key
·Leg unit shortening.
14 15
4.You can wait until the body shape detection is completed or press the OK key to
skip the detection and start the massage directly.
5.Shoulder position fine adjustment: After the body shape detection is completed, the
remote control or the voice prompt will prompt the user to finely adjust the shoulder
positions. If the massage rollers just stop on your shoulders, this adjustment is not
needed and you can skip it and directly press the OK key to start the massage.
Otherwise, please adjust the massage rollers to your shoulders with the Up key
and the Down key and press the OK key to start massage. If no operation is
made within 20s, directly default the current massage roller position for the
shoulder position and start the massage.
16 17
06
Shoulder Adj 20:00
06
Please wait......
Body detection
Auto lying down......
Attention, please! Make sure there is no body OK' to skip.
Please use 'up' or 'down' key to
select and press OK
Product structure Operation Instructions
II. Armrest shortcut key description
On/off key Voice key
USB
charging port
USB charging port
Charges mobile phones or other electronic devices.
On/off key
A long press of this key can turn the massage chair on or off and a short press pause
or exit the massage.
Voice key
A long press of this key can enable or disable the voice assistant function and a short
press can wake up the voice assistant.
III. Start massage
Output
1. Press the On/Off key on the remote control or press and hold the On/Off key
on the right armrest to turn on the chair.
2. Wait to select the automatic program. Select the automatic program according to
the remote control or voice prompt. If there is no operation for more than 20
minutes, it will be turned off automatically.
3. Automatic angle adjustment: After the automatic program is selected, the massage
chair will automatically adjust to the zero-gravity angle. You can wait until the
adjustment is completed, or press the OK key to skip to the next step.
Automatic angle adjustment diagram Body shape detection diagram
Position too high
Proper position
Position too low
Table des matières
Autres manuels Titan masseur
Titan
Titan Pro-Alpha Manuel utilisateur
Titan
Titan Pro-3D Cascade Manuel utilisateur
Titan
Titan Optimus 3D Manuel utilisateur
Titan
Titan TI-Pandora Manuel utilisateur
Titan
Titan TP-Cosmo Manuel utilisateur
Titan
Titan TI-Jupiter Manuel utilisateur
Titan
Titan RT-Z05A Manuel utilisateur
Titan
Titan TI-8700 Manuel utilisateur
Titan
Titan OS-PRO SUMMIT Manuel utilisateur
Titan
Titan Summit Flex SL-Track Manuel utilisateur
