TITAN ARMY C32C1S Manuel utilisateur

C32C1S

Precautions Before using this product, please read this User Manual carefully and keep it well
Please use a reliable grounded socket, Do not overload the socket, or it may cause fire or
electric shock.
Do not cover or block the vent hole in the rear casing, and do not use the product on a bed,
sofa, blanket or similar objects.
The range of the supply voltage of the monitor is printed on the label on the rear casing.
If it is impossible to determine the supply voltage, please consult the distributor or local
power company.
If the monitor will not be used for a long period, please cut o the power supply to avoid
electric shock in rainy days and damage due to abnormal supply voltage.
Keep the monitor away from water sources or damp places, such as bath rooms, kitchens,
basements and swimming pools.
Make sure the monitor is placed on a flat surface. If the monitor falls down, it may cause
human injury or device damage.
Store and use the monitor in a cool, dry and well ventilated place, and keep it away from
emission and heat sources.
Do not put foreign matters into the monitor, or it may cause short circuits resulting fire or
electric shock.
Do not disassemble or repair this product by self to avoid electric shock. If faults occur,
please contact the after-sales service directly.
Do not pull or twist the power cable forcedly.
There is a polarizer layer (not a protective film) on the surface of the screen. Do not peel
it o, or the product may be damaged and the warranty will be invalid.

Package Content
Packing list
Please check that the package of the monitor contains all parts. If any part is lost, please contact
the distributor.
The color and shape of parts may vary with models. Figures in this User Manual are for reference only.
Cables supplied may vary with purchased products. Figures in this User Manual are for reference only.
Redundant screws can be used as spare screws.
Monitor Base
Stand Stem
Power Cable User manual
Mount Screws x 4
Screws x 4 DP signal cable

Installation
Installation of base
1. Open the package, take out the product with foam still attached, and gently place it on a desktop or table.
2. Take out the stand stem and base. As pictures shows, use a screws to fasten stand stem and base together.
3. Remove the foam covering the botteom of the monitor, then remove the adapter from the back of monitor.
Use two screws to fasten the adapter onto the stand stem.
4. Align the stand stem’s bracket with the opening on the back of the monitor, and carefully insert bracket.
The pieces should click into place. Slide up the quick release button if you need to remove the stand.
5. After assembly, simply hold the stand with hand to stand the monitor upright.
Note: During standing of the whole monitor, do not press the liquid crystal screen with hand to avoid
damage to the screen.
Stand Screws x 1
(Fixed Base)
1
Adapter Quickly release button
Stand Screws x 2
(Fixed Stand)
1

Installation of mount
1. Open the package, take out the product with foam still attached, and gently place it on a desktop or table.
Remove the extra parts and the foam covering the monitor. Slide up the quickly release button to remove
the adapter from the monitor.
2. Remove the original screws x 4 from the opening in the back of the monitor. Follow the directions received
with your mount, stand, or accessory and install the monitor on the wall or xture as desired. Remember to
use the included Mount screws when attaching anything to the back of the monitor. Refer to the image as
follow for correct screw placement.
3. Note: Hang the assembled product on a hard wall. Do not pinch the screen with your hands during the
hanging process to avoid damaging the screen.
Mount (not supplied)
Note: In order to prevent the monitor from falling when it is used on the wall, please install it properly
and do safety protection. Do not place or hang any objects on the wall bracket, and the wall height
should be within 2 meters.
Mount Screws x 4
2
Original Screws x 4
Dissemble the four original screws
Quickly release button

Adjustment of monitor
-5°(±2°) ~+15°(±2°)
Tilting angle:

Instructions
Description of buttons
Explanation of indicators
Indicator: Solid blue light indicates power is on and the monitor is operating normally. Flashing blue light indicates
no video source has been detected. Please ensure your computer is on and all video cables are fully inserted and or
Connected.
Button Function
1
2
3
4
5
Menu button: Press to enter sub-menus/ quickly enter the main menu.
Down button: Press to move down in the menu/quickly adjust the Game Crosshair.
Up button: Press to move up in the menu/quickly adjust the Contextual Model.
Exit/hot key: Press to return to the previous menu/quickly adjust the Input Signal.
Power button: Press to turn on/o the monitor.

Cable connection:
* Note: If the power cable or signal cable is damaged, you must replace it
* The bottom interface conguration at the back of the monitor varie with
products.
with special soft cables or special components purchased from the
manufacture or maintenance department.
Please connect the power
cable plug to the
corresponding port of the
monitor, and connect the
other end to a properly
grounded power outlet.
Use the HDMI cable to connect the HDMI IN interface
of the product to the HDMI OUT interface of a PC.
HDMI interface
Use the HDMI-DVI cable to connect the HDMI IN interface
of the product to the DVI OUT interface of a PC.
(In general, PCs do not transfer video signals to the
monitor through the DVI OUT interface , and it is
necessary to connect a loudspeaker box additionally to
play sounds of PCs.)
DP interface AC IN
AUDIO OUT
OR
Use the DP cable to
connect the DP IN interface
of the product to the DP
OUT interface of a PC.
Connect audio outputting
devices such as earphones
to the AUDIO OUT
interface.

OSD menu
240hz 2560
x
1440
Other Settings
Game Settings
OSD Settings
Color Settings
PIP/PBP
Picture Settings
Standard Mode ON
OFF
OFF
OFF
OFF
50
RTS/RPG Mode
FPS Arena Mode
MOBA Arena Mode
Adaptive-Sync
Shadow Balance
Menu description
The screen display (OSD) menu can be used to adjust settings of the monitor and is shown on the screen after the
monitor is powered on and the button is pressed.
1. Press the button to activate the browser screen.
2.Press or to scroll through the functions.
- Select the desired function, and press to enter the sub-menu.
- Press or to scroll through sub-menus, and press key to select and conrm the desired function.
- Press or to select one option, and press to conrm settings and exit from the current menu.
3. Press to exit from the menu screen
The color and shape of the OSD menu of the actual computer may be slightly dierent from them shown in the
gure.
Specications of the OSD menu may change with improvements of functions without prior notice.

* Functions of the monitor vary with models, and the functions in this manual are for reference only.
O/On
O/On
O/On
O/On
O/On
O/On
O/On
O/On
O/On
O/On
O/On
O/On
O
On:Movie Mode/Reading Mode/Night Mode
O/On
O/HDR Standard
Shadow Balance 0-100
O/Standard/Fast/Ultrafast
Position: Top Right/Top Left/Bottom Right/Bottom Left
O/On
O/Standard/Expert/Elaboration
O
O
On: 15:00/30:00/45:00/60:00
On: Crosshair 1/Crosshair 2/Crosshair 3/Crosshair 4/Crosshair 5/Crosshair 6
Game Settings
Standard Mode
RTS/RPG Mode
FPS Arena Mode
MOBA Arena Mode
Adaptive-Sync
HDR
Response Time
Refresh Rate
MPRT
Game Crosshair
Game Time
Dynamic Brightness
Ambient Lighting
Hue
Saturation
Warm
O/On
Natural
Cool
User1
User2
User3
Color Settings
Brightness 0-100
0-100
0-100
R/G/B/C/M/Y: 0-100
R/G/B/C/M/Y: 0-100
0-5
1.8/2.0/2.2/2.4/2.6/ S.curve
Wide Screen/4:3/1:1/Auto
Contrast
Low Blue Light
Sharpness
Gamma
Aspect Ratio
Picture Settings
DCR
Contextual Model
Table des matières
Autres manuels TITAN ARMY Moniteur


















