TITA THINK TT18 MINI CAM Manuel utilisateur
MINI HD CAMERA USER MANUAL
Introduction
1
Power Button
Light Sensor
Camera Lens
Invisible Infrared LEDs
Force Shutdown Button
USB Charger Plug
System Reset Button
QR Code
Indicated Lights
SD Card Slot
Tech Spec.
2
Resolution
Video format
View angle
Motion detection distance
Infrared LED
Night vision distance
Min. illumination
Battery capacity
Battery life
Battery charging time
Audio recording range
Memory card
Power source
Operating temperature
Operating humidity
Computer software
Computer platform
Web browser
150°
6 meters / 20 feet
6
2 meters / 7 feet
1 Lux
500mA
50 - 120 minutes (Depending on use environment
and camera configuration)
1 Hour
6 square meters / 20 square feet
Micro-SD card with up to 128GB (FAT32 format)
100-240V AC Power
-10 to 45 °C / -14 to 113 °F
15 - 85% RH
VLC Player / SM Player
Windows XP/Vista/7/8/10 and Mac OS X
IE7 and above, Chrome, Firefox, Safari, etc
AVI (H.264 Compression)
1080P@15fps, 720P@30fps, 640P@30fps, 480P@30fps
Button Operation
3
1 . Sometimes you may be unable to shut down camera by pressing
the Power button, you can try to use Forced Power Off button, See
details in next page “Force shutdown camera”.
2 . If camera doesn’t detect SD card, camera will not record. The
blue or red light will only flash 1 time when you operate the Power
button.
Turn on camera
Turn off camera 1
Quick-press the power button, the camera will
turn on. Camera will be available to operate
after 1 minute. Cam will be automatically
turned on when the USB charger is plugged.
Unplug your USB charger from the camera, press Power button for 8
seconds at least, the cam is turned off.
(When the camera is plugged in, long press the power button means all
indicator lights are turned off, camera will shutdown once the USB
charger is unplugged.)
Start recording
Quick-press power button when camera is running (Ensure the cam
has an SD card in it), the red indicator light will flash 3 times,
camera starts recording.
Stop recording
Quick-press power button when camera is running (Ensure the cam
has an SD card in it), the blue indicator light will flash 3 times,
camera stops recording.
2
2
Button Operation
4
Force shutdown camera
Press the button in the pinhole with a pin tool
to force shutdown the camera when the Power
button doesn't work.
Reset camera / Retore to default
If the cam is plugged with USB charger, please
replug the USB plug 1 time.
Ensure the cam is on, press the sys_reset button
more than 5 seconds with a pin tool
(During this process, all indicator lights will be
turned off).
Camera will reset itself and restore default
settings.
After reset success, the camera will be in Setup
mode, the indicator lights will has red light is ON
only.
APP: HdMiniCam
Name: Cam
Password: 8888
UID:
HLXXXXXXXXXXXXXXXXXXXXX
NOTE: This function will not work when the USB
charger is plugged, to use this function, please take
out the USB charger plug first.
1
1 . The indicator lights may be set to OFF if you disable it on app,
or you had have long-pressed the Power button when the USB
charger was plugged. For this case, in order to reset camera, please
ignore the status of indicator lights, just press and hole the sys_reset
button more than 10 seconds and then release it.
Indicator Lights Status
5
In order to get the cam working propetly,
please read following status carefully.
General Status:
The camera contains 3 indicator lights.
All lights OFF
NOTE: Camera can’t be powered
off when charging.
USB charger is NOT plugged
Yellow OFF: The camera is full charged.
Blue and Red ON: The camera is startup.
Blue ON and Red OFF: The camera is normally working
and the WiFi connection setup successfully.
Blue Blinking: The camera loses WiFi connection. You need to reset
the camera by referring to Page 4 and set up it again.
represents random status.
Blue OFF and Red ON: The camera is in Setup Mode.
In this status, camera is unable to operate and requires for setup.
Yellow ON: The camera is charging.
All lights OFF:
1. The camera is powered off.
2. The indicator lights have been
disabled on HDMINICAM app.
All lights OFF:
1. The indicator lights have been
disabled on HDMINICAM app.
2. Long press Power button when USB
charger is plugged, all indicators will
be turned off. Cam will shut down once
the USB plug is taken out.
USB charger is plugged
When the camera running, operate the Power button will be able to
control camera to start or stop recording onto SD card, See what light
status you will get when you operate the Power button:
Indicator Lights Status
6
When the camera detects an SD card:
Recoding Status:
Blue light is flashing 3 times: The camera stops recording
when quick-pressing Power button.
Red light is flashing 3 times: The camera starts recording
when quick-pressing Power button.
Not detects SD card:
Blue light is flashing 1 time: No SD card detected or
the SD card is not FAT32 format
Red light is flashing 1 time: No SD card detected or
the SD card is not FAT32 format
To get the camera properly recorded video to SD card, please format the SD card
to FAT32 format, see FAQ E.
When camera starts recording, it records a 3-minute video clip
by default when sensing motion. You can alter the recording
duration time on app.
represents random status.
Connect Camera to Phone
7
1. Download HDMINICAM app
2. Make sure the camera is in Setup Mode
3. Go to phone WiFi settings
The HdMiniCam app is available on Apple app store
and Google play store. Directly search “HDMINICAM”
to download.
In Setup Mode, the camera’s lights will be
(Blue OFF, Red constant ON). If the status
is incorrect, please replug the USB plug and
then RESET the camera by refering Page 4.
In Setup Mode, camera will
broadcast a WiFi SSID, find out
it in your phone WiFi settings.
Select it and get your phone
connected to this WiFi SSID.
Please note that the WiFi SSID
is the camera UID number.
Connect Camera to Phone
8
4. Go to HDMINICAM app
In general, the camera will be automatically added to HDMINICAM
app. If not, please tap “+” icon -> Add new online Camera.
5. Setup WiFi for camera
Tap icon and select Device Settings (Advance Config).
NOTE: If you don’t have a need to view feeds on phone, and just
want camera only work as video recorder and save video clips
onto SD card, just stop here.
Connect Camera to Phone
9
6. Enter your WiFi password
Tap WiFi Config and then select your WiFi SSID from the WiFi lists.
Enter your WiFi password, please note the password is case sensitive.
NOTE: The camera only supports 2.4GHz WiFi, please do NOT
choose 5GHz WiFi SSID to connect.
Table des matières
Autres manuels TITA THINK Caméra de sécurité
