TIS electronics 30070 Manuel utilisateur
30070 User Manual
BL IP HDMI Matrix Set
30070 BL IP HDMI Matrix Set
Ecco Cine Supply GmbH Contact: info@tls-electronics.de 2
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or
adjusting this product. Please keep this manual for future reference.
SURGE PROTECTION DEVICE RECOMMENDED
This product contains sensitive electrical components that may be damaged by
electrical spikes, surges, electric shock, lightning strikes, etc. Use of surge
protection systems is highly recommended in order to protect and extend the
life of your equipment.
Safety Information
To reduce the risk of electric shock, do not expose this product to rain or
moisture
Do not modify the wall plug. Doing so will void the warranty and safety
features
If the wall plug does not fit into your local power socket, hire an electrician
to replace your obsolete socket.
This equipment should be installed near the socket outlet and the device
should be easily accessible in the case it requires disconnection
30070 BL IP HDMI Matrix Set
Ecco Cine Supply GmbH Contact: info@tls-electronics.de 3
Content
Safety Information..............................................................................................2
Introduction........................................................................................................4
Features.............................................................................................................5
Panel Description...............................................................................................6
IP HDMI Transmitter .......................................................................................6
RS232 PIN description ...................................................................................7
IP HDMI Receiver...........................................................................................8
IR remote control...............................................................................................9
Connection diagram ........................................................................................10
One to one....................................................................................................10
One to many.................................................................................................10
Many to many............................................................................................... 11
Specification ....................................................................................................12
Package Contents ...........................................................................................13
Maintenance....................................................................................................14
Warranty Policy.............................................................................................14
Limitations of Warranty.................................................................................14
Exclusive Remedies .....................................................................................15
RMA Policy ...................................................................................................15
Standard Replacement.................................................................................16
Once you have obtained an RMA number....................................................16
Please note:..................................................................................................16
Warranty..........................................................................................................17
Return and RMA Policies..............................................................................18
30070 BL IP HDMI Matrix Set
Ecco Cine Supply GmbH Contact: info@tls-electronics.de 4
Introduction
The BL 30070 IP HDMI matrix Set is a matrix extender consisting of a
transmitter and a receiver. The 256-channel HDMI high-definition signal source
can be realized by connecting a switch between the transmitting and receiving
lines through the network cable. It can be switched, distributed and extended to
an unlimited number of displays.
Of course, this model can also support one-to-one, or one-to-many
transmission mode. In the transmission process, using Cat5e/6 types of
network cables, the transmitter to the receiver can be extended by 150 meters,
and with the switch it can be extended by 300 meters. In the case of
many-to-many transmission sources, when the digital tube of the transmitter
and the receiver display the same value, it means that the information of the
corresponding signal source is played by the display, but the same value
cannot be displayedon the digital tube of the other tranasmitter/receiver.
At the same time, this product supports RS232 remote operation, infrared
return and remote control switching. Widely used in security monitoring,
dispatching centers, entertainment centers, multimedia exhibition venues and
other places.
Note:
It is recommended to work with an IGMP enabled switch for the use of
multicast video streaming.
30070 BL IP HDMI Matrix Set
Ecco Cine Supply GmbH Contact: info@tls-electronics.de 5
Features
HDMI signal resolution supports 1920*1080@60Hz, backward compatible
with multiple resolutions
Use H.264 format to compress and decompress video, effectively improve
the transmission rate and ensure the smoothness and stability of playback.
Support RS232 signal remote control device
Support infrared return, remote signal source
With remote control switching and touch panel switching source channel
function
One-to-many or multi-to-multiple cascading amplification transmission can
be carried out through the switch or router, supporting 256 channels of
signal source input in different frequency bands, and infinite channel display
device output.
Using the cat5e/6 network cable, the transmitter to the receiver can be
extended by 150 meters, and with a switch it can be extended by 300
meters.
Using 26AWG HDMI standard cable, the input distance can reach 10
meters, and the output distance can reach 5 meters.
30070 BL IP HDMI Matrix Set
Ecco Cine Supply GmbH Contact: info@tls-electronics.de 6
Panel Description
IP HDMI Transmitter
S.N.
Name
Introduction
❶
DC 5V
5V DC power input
❷
HDMI In
HDMI signal input
❸
RS232
RS232 Communication
Interface, 38400,8,N,1
❹
Cat5e/6e
RJ45 interface
❺
IR OUT
External red line output
interface
30070 BL IP HDMI Matrix Set
Ecco Cine Supply GmbH Contact: info@tls-electronics.de 7
❻
Signal channel
display
Adjust the corresponding
signal channel
❼
Back
Return
❽
+
Channel up
❾
-
Channel down
❿
OK
Determine
RS232 PIN description
Data TX
Ground
Data RX
Parameter: 38400,8,N,1
30070 BL IP HDMI Matrix Set
Ecco Cine Supply GmbH Contact: info@tls-electronics.de 8
IP HDMI Receiver
S.N.
Name
Introduction
❶
DC 5V
5V DC power input
❷
HDMI Out
HDMI signal output
❸
RS232
RS232 communication interface
38400,8,n,1
❹
Cat5e/6e
RJ45 interface
❺
IR In
External red line output
interface
❻
Signal channel
display
Adjust the corresponding
signal channel
30070 BL IP HDMI Matrix Set
Ecco Cine Supply GmbH Contact: info@tls-electronics.de 9
❼
Back
Return
❽
+
Channel up
❾
-
Channel down
❿
OK
Determine
IR remote control
With the IR remote control the user can switch choose the specified channel for
the transmitter and the receiver
30070 BL IP HDMI Matrix Set
Ecco Cine Supply GmbH Contact: info@tls-electronics.de 10
Connection diagram
Note: It is recommended to work with an IGMP enabled switch for the use
of multicast video streaming.
Note: Using the super five network cable, the transmitter to the receiver
can be extended by 150 meters, and the switch can be extended by 300
meters.
One to one
One to many
Table des matières
