TIPTEL 85 System UP0 Guide d'installation

Tiptel.com GmbH Business Solutions –Halskestraße 1 –40880 Ratingen –Deutschland –www.tiptel.com

FAQ tiptel 85 System (from vers. 2.xx)

Mode of Use: Office or Switchboard?

as of Dec. 08, 2008

1. Modes of use

When turning on the telephone with factory default settings for the very first time the user is prompted

to choose among two modes of use Office (Standard) or Switchboard (Receptionist). The mode

selected will be shown under the menu item "Information“ -> "Software". Changing the mode of use

at a later time is only possible by resetting the telephone to factory default settings.

When updating the firmware from Rel. 1 to Rel. 2 the mode Standard will automatically be set.

2. Predefined function keys in switchboard mode

When changing to switchboard mode the following function keys will be programmed in the phone:

Key 1 -Accept (accept waiting call)

Key 2 -Transfer (explicit call transfer)

Key 3 -Disconnect

For correct operation these keys may not be assigned by the PBX in any way. As before, function

keys configured within the PBX have a higher priority. The predefined keys can be reprogrammed

later as usual.

When selecting standard mode all keys on the telephone are not being pre-programmed.

Tiptel.com GmbH Business Solutions –Halskestraße 1 –40880 Ratingen –Deutschland –www.tiptel.com

3. Display keys (selection keys)

The main difference between standard mode and switchboard mode is the function of the display keys

(selection keys) when dealing with more than one call at the same time. Different connections will be

shown on the display in a list and can basically have three states:

One connection in "connected" state

One or more connections in "on hold" state

One or more connections in "call waiting" state

In standard mode

When operating the display keys with the connection list in standard mode a continuative list with

available options is shown (same as with release 1).

In switchboard mode

When operating the display keys in switchboard mode next to the connections "on hold" or "call

waiting" the predefined function will be carried out immediately:

Connections in "on hold" state Function “retrieve”

Connections in "call waiting" state Function "accept"

R030123456789

X Markham, Linda

Willis, John

Switchboard

retrive call

view available options

accept waiting call

Ce manuel convient aux modèles suivants

2

Table des matières

Autres manuels TIPTEL Téléphone IP

TIPTEL

TIPTEL 282 Manuel utilisateur

TIPTEL

TIPTEL Ergophone 6040 Manuel utilisateur

TIPTEL

TIPTEL IP 286 Manuel utilisateur

TIPTEL

TIPTEL INNOVAPHONE 200 Manuel utilisateur

TIPTEL

TIPTEL 3240 Manuel utilisateur

TIPTEL

TIPTEL 117 Manuel utilisateur

TIPTEL

TIPTEL 192 Manuel utilisateur

TIPTEL

TIPTEL 3130 Manuel utilisateur

TIPTEL

TIPTEL IP 280 Manuel utilisateur

TIPTEL

TIPTEL IP 284 Mode d’emploi

TIPTEL

TIPTEL 3275 Manuel utilisateur

TIPTEL

TIPTEL 3020 Manuel utilisateur

TIPTEL

TIPTEL Profi Clip Manuel utilisateur

TIPTEL

TIPTEL 31 series Manuel utilisateur

TIPTEL

TIPTEL 3030 Manuel utilisateur

TIPTEL

TIPTEL IP 280 Manuel utilisateur

TIPTEL

TIPTEL IP 280 Manuel utilisateur

TIPTEL

TIPTEL IP28xs Manuel utilisateur

TIPTEL

TIPTEL IP 284 Manuel utilisateur

TIPTEL

TIPTEL 290 ISDN Manuel utilisateur

TIPTEL

TIPTEL ergoVoice A2 Manuel utilisateur

TIPTEL

TIPTEL 83 VoIP Manuel utilisateur

TIPTEL

TIPTEL 3275 Manuel utilisateur

TIPTEL

TIPTEL 31xx series Manuel utilisateur

Manuels Téléphone IP populaires d'autres marques

Alcatel

Alcatel 4028 Manuel utilisateur

Polycom

Polycom Polycom VVX 600 Manuel utilisateur

Polycom

Polycom SoundPoint IP 450 Manuel utilisateur

Cisco

Cisco SPA-500 Series Manuel utilisateur

Polycom

Polycom SoundPoint IP 650 Manuel utilisateur

Proximus

Proximus Maestro 3016 IP Manuel utilisateur

Fanvil

Fanvil X4 Manuel utilisateur

Cisco

Cisco 7962 Manuel utilisateur

Snom

Snom 320 Manuel utilisateur

Yealink

Yealink Yealink SIP-T46G Manuel utilisateur

Avaya

Avaya 4625SW Manuel utilisateur

Yealink

Yealink SIP-T52S Manuel utilisateur

Nortel

Nortel 1140E Manuel utilisateur

Nexotek

Nexotek NT-P500 Manuel utilisateur

Avaya

Avaya Integral 5 R3.0 Manuel utilisateur

GE

GE 28320EE2 - Dect 6.0 InfoLink 2 Manuel utilisateur

Avaya

Avaya 4600 Series Manuel de service

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manuel utilisateur