Time Versalift SST-37-EIH Manuel utilisateur

Operator’s Manual

Time Manufacturing Co. 7601 Imperial Drive P.O. Box 20368 Waco, Texas 76702 Phone: 254-399-2100 Fax: 254-751-0775

Aerial Device

ATTENTION:

THIS MANUAL CONTAINS CONFIDENTIAL INFORMATION

AND IS THE SOLE PROPERTY OF TIME MANUFACTURING CO.

CONTENTS ARE NOT TO BE DISCLOSED, COPIED, OR REPRODUCED

IN ANY MANNER WITHOUT THE EXPRESSED, WRITTEN PERMISSION

OF TIME MANUFACTURING CO.

DO NOT ATTEMPT TO OPERATE THIS VERSALIFT UNTIL

YOU HAVE READ AND UNDERSTOOD ALL INFORMATION IN BOTH

OPERATOR’S AND SERVICE MANUALS, PROVIDED WITH EACH

VERSALIFT.

MANUAL PART NUMBER

28009-09

SERIAL NUMBER

SST-37/40-EIH

Time Manufacturing Co. reserves the right to improve the design or change speciﬁcations at any time without notice.

09/16

PLEASE NOTE THE ANSI A92.2 STANDARD AND THE MANUAL OF RESPONSIBILITIES CONTAINS

RECENTLY UPDATED INFORMATION. DEALERS, OWNERS, USERS, OPERATORS, LESSORS AND LESSEES MUST

ADHERE TO THESE UPDATED STANDARDS.

MANUFACTURING COMPANY

OWNER’S WARRANTY

The Versalift Aerial Platform Lift is engineered and designed to perform as stated on

published specifications. Only quality material and workmanship are used in the

manufacture of this product. With proper installation, regular maintenance, and periodic

repair service, the equipment will provide excellent service.

Those parts of the Versalift that are manufactured by Time Manufacturing Company

are warranted for one full year from date of purchase. Structural components will carry

a lifetime warranty for defects in material and workmanship which existed at the time of

initial delivery, wear components are not covered by this statement. This warranty is

issued only to the original purchaser and promises that Time Manufacturing Company

manufactured products are free from defects in material and factory workmanship

when properly installed, serviced, and operated under normal conditions, according to

the manufacturer’s instructions.

Manufacturer’s obligation under this warranty is limited to correcting without charge at

its factory any part or parts thereof which shall be returned to its factory or one of its

Authorized Service Stations, transportation charges prepaid, within one year after being

put into service by the original user, and which upon examination shall disclose to the

Manufacturer’s satisfaction to have been originally defective. Correction of such defects

by repair to, or supplying of replacements for defective parts, shall constitute fulfillment

of all obligations to original user.

This warranty shall not apply to any of the Manufacturer’s products which must be

replaced because of normal wear, which have been subject to misuses, negligence or

accident, or which shall have been repaired or altered outside of the Manufacturer’s

factory (unless authorized by the Manufacturer in writing), products which have not

been maintained and operated in accordance with Time Manufacturing Company’s

operators, maintenance manuals and bulletins, products which are repaired without

using original Time Manufacturing Company parts. This limited warranty does not

cover transportation fees and/or consumables used for the repair. Products or parts

manufactured by others are covered only by such warranties as are extended to TIME

MANUFACTURING CO. by its suppliers.

Manufacturer shall not be liable for loss, damage, or expense directly or indirectly from

the use of its product or from any cause.

The above warranty supersedes and is in lieu of all other warranties, expressed or

implied, and of all other liabilities or obligations on part of Manufacturer. No person,

agent, or dealer is authorized to give any warranties on behalf of the Manufacturer or to

assume for the Manufacturer any other liability in connection with any of its products

unless made in writing and signed by an officer of the Manufacturer.

28009-09 09/16VERSALIFT SST-37/40-EIH i

TABLE OF CONTENTS

Introduction Section 1

Manual Structure ........................................................................................................................ 1-1

Additional Manual Features ........................................................................................................ 1-1

Nomenclature ............................................................................................................................. 1-2

Responsibilities / Safety Section 2

Responsibilities of Dealers, Owners, Users, Operators, Lessors and Lessees ......................... 2-1

Decals ......................................................................................................................................... 2-2

Think Safety ................................................................................................................................ 2-6

What is Insulated and What is not Insulated .............................................................................. 2-9

Additional Safety Considerations .............................................................................................. 2-10

Speciﬁ cations Section 3

General Speciﬁ cations ................................................................................................................ 3-1

Option Speciﬁ cations .................................................................................................................. 3-2

Dimensional Speciﬁ cations ......................................................................................................... 3-5

Vehicle Speciﬁ cations ............................................................................................................... 3-11

Operation Section 4

Positioning the Versalift for Operation ....................................................................................... 4-1

Aerial Lift Operations .................................................................................................................. 4-2

Cab Control Operation ............................................................................................................... 4-4

Ground Control Operation ......................................................................................................... 4-4

Lower Control Operation ........................................................................................................... 4-6

Upper Control Operation ............................................................................................................ 4-6

Storing the Aerial Lift ................................................................................................................. 4-8

Lift Eye Operation (optional) ....................................................................................................... 4-9

Emergency Operation Section 5

Daily Visual Inspection Section 6

1-1 28009-09 09/16VERSALIFT SST-37/40-EIH

INTRODUCTION

DANGER: READ AND UNDERSTAND

THIS MANUAL BEFORE ATTEMPTING TO

OPERATE THIS AERIAL DEVICE.

The manual identifies all the controls and their

locations and describes how the controls function.

Routine preventive maintenance is very important in

maintaining reliable aerial lift service. A preventive

maintenance schedule is provided and must be

understood and followed by all operators.

DANGER: THIS IS NOT MAINTENANCE

FREE EQUIPMENT.

NOTICE: THIS MANUAL IS A PERMANENT

PART OF THE VERSALIFT AERIAL DEVICEAND

MUST REMAIN WITH THE UNIT ALWAYS.

Time Manufacturing Company reserves the right

to improve the design or speciﬁ cations at any time

without any obligation to incorporate new features

into products previously sold.

MANUAL STRUCTURE

This manual is divided into six, numbered chapters.

The ﬁ rst number in the page number at the bottom

of each page identiﬁ es the chapter number. Chapter

tabs, with titles printed on them, allow easy location

of the desired subject.

ADDITIONAL MANUAL FEATURES

Danger, caution, and warning notes are indented,

bold faced, and separated from the regular text

to emphasize their importance and the need for

attention.

English measurements are followed by equivalent

metric measurements in parenthesis.

Non-critical units of measure are usually rounded-oﬀ

to the nearest whole unit.

Notes referring the reader to related information in

the manual indicate the chapter or a section of a

chapter, not to a single page. The reader may need

to scan a few pages to ﬁ nd the needed information.

The Versalift aerial device has been designed and

engineered to conveniently place personnel at work

stations above the ground. This aerial device, as

manufactured, meets or exceeds all applicable ANSI

A92.2. Full controls at the platform and complete

freedom of boom movements make the Versalift a

truly ﬂ exible and functional work platform.

NOTE: As the aerial device users, you must read,

understand, and follow the instructions in this

manual and other manuals supplied with this

aerial lift unit.

This manual is furnished to provide practical and

essential information for eﬃ cient operation of the

Versalift aerial device. Proper operation of this aerial

lift is the responsibility of the operator and requires a

thorough understanding of its capabilities. Personnel

responsible for the operation of the aerial lift must be

familiar with and understand this manual.

In addition to, dealers, owners, operators, renters,

lessors and lessees are required to comply with the

requirements of the applicable section or sections

found in ANSI A92.2.

NOTE: For additional safety information

and required responsibilities, refer to the

accompanying EMI Safety Manual and Manual

of Responsibilities.

Detailed information for the maintenance inspection

and service of the Versalift aerial device can be

found in the accompanying Service Manual. Should

further installation information be required, contact

your local Versalift dealer or Time Manufacturing

Company.

DANGER: THIS EQUIPMENT SHOULD

BE OPERATED AND SERVICED ONLY BY

COMPETENT PERSONNEL FAMILIAR WITH

GOODSAFETYPRACTICES. THISINSTRUCTION

IS WRITTEN FOR SUCH PERSONNEL AND

IS NOT INTENDED AS A SUBSTITUTE FOR

ADEQUATE TRAINING AND EXPERIENCE

IN SAFE PROCEDURES FOR THIS TYPE OF

EQUIPMENT.

INTRODUCTION

THIS MANUAL CONTAINS CONFIDENTIAL

INFORMATION AND IS SOLE PROPERTY OF

TIME MANUFACTURING, AND IS NOT TO BE

DISCLOSED, COPIED, OR REPRODUCED

WITHOUT EXPRESSED PERMISSION OF

TIME MANUFACTURING.

1-2 28009-09 09/16VERSALIFT SST-37/40-EIH

INTRODUCTION

2-1 28009-09 09/16VERSALIFT SST-37/40-EIH

RESPONSIBILITIES / SAFETY

DANGER: FAILURE TO COMPLY WITH

YOUR REQUIRED RESPONSIBILITIES IN THE

USE AND OPERATION OF THE AERIAL DEVICE

COULDRESULTINDEATH ORSERIOUSINJURY.

IMPORTANT

You are required by ANSI/SIA A92.2 to read and

understand YOUR RESPONSIBILITIES before

you use or operate the Aerial Device. It is your

responsibility and your employer’s responsibility to

identify and comply with applicable codes, standards,

and regulations.

The operation of any aerial device is subject to

certain HAZARDS that can be protected against

only by the exercise of INTELLIGENCE, CARE

AND COMMON SENSE. It is essential to have

COMPETENT, CAREFUL PERSONNEL, TRAINED

in the INTENDED USE, SAFE OPERATION,

MAINTENANCE AND SERVICE of this type of

equipment.

The USER and OPERATOR MUST MAKE

DECISIONS on the maintenance, use and operation

of the Aerial Device with due consideration for the

fact that the SAFETY OF THE OPERATOR AND

OTHER PERSONNEL is dependent on those

decisions. FAILURE TO COMPLY with your

REQUIRED RESPONSIBILITIES in the use and

operation of the Aerial Device could result in DEATH

OR SERIOUS INJURY.

DANGER: READAND UNDERSTAND THIS

MANUAL BEFORE ATTEMPTING TO OPERATE

THIS AERIAL DEVICE.

RESPONSIBILITIES

(for Dealers, Owners, Users, Operator, Lessors and Lessees)

2-2 28009-09 09/16VERSALIFT SST-37/40-EIH

RESPONSIBILITIES / SAFETY

Only properly trained operators are qualified to

operate the Versalift aerial lift. Operator training

shall include complete instruction and understanding

of the manufacturer’s manuals, employer’s work

rules, and all related governmental regulations. Prior

to operation from the platform the machine must

be operating properly, must have been installed

properly, inspected, and maintained in accordance

with the manufacturer’s instructions. All safety signs,

guards, and covers must be in place and in proper

condition.

DANGER: ANUNTRAINEDORCARELESS

OPERATOR SUBJECTS HIM/HERSELF AND

OTHERS TO DEATH OR SERIOUS INJURY.

Throughout this manual there are danger, warning,

and caution notes that emphasize the possible

hazards when operating the Versalift. It is the

responsibility of the operator to become familiar with

the contents of this manual.

Two of the main risks associated with operating an

aerial lift:

(1) Electrocution caused by operating too close

to power lines.

(2) Injuries caused by falling as a result of

equipment failure or the operator performing

an unsafe or unstable maneuver.

No manual can address every conceivable operating

hazard. Therefore, the prevention of accidents

is greatly dependent upon good judgement and

common sense of the operator.

It is the responsibility of the operator to use the

Versalift only when it has been installed and

maintained in accordance with the manufacturer’s

manuals. The preventive maintenance program

outlined in this manual and the Service manual must

be followed.

It is extremely important for the operator to be

thoroughly familiar with the Versalift aerial device.

Study the information in this manual and the Versalift

controls until both are completely mastered. Then go

to a large, open area to practice using the aerial lift.

Decals are installed at numerous locations on the

aerial lift to warn personnel of the potential hazards

during the use and operation of the aerial lift. It is

important that the operator and ground personnel

read and understand the information on the decals.

If any decals are defaced, illegible or lost, they

must be replaced. Refer to the “Decal Placement”

illustration in this manual for a complete listing and

the locations of the decals. For your convenience

these decals are pictured on the following pages as a

quick reference for reviewing safety concerns and for

providing part numbers when ordering replacements.

DECALS

All the warning and instruction decals, and their

respective part numbers, on the Versalift aerial

device are included below and on the following

pages. The decals are not shown at actual size.

SAFETY

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Time Système de levage

Time

Time VERSALIFT VST-7500-I Manuel utilisateur

Manuels Système de levage populaires d'autres marques

morse

morse 82H-124 Manuel utilisateur

Braun

Braun NL955 Series Manuel utilisateur

haacon

haacon 1889.10 Manuel utilisateur

Protekt

Protekt AT 252 Manuel utilisateur

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manuel utilisateur

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manuel utilisateur

Genie

Genie Z-60/34 Manuel utilisateur

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manuel utilisateur

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manuel utilisateur

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manuel de programmation

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manuel de programmation

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manuel de programmation

BERG

BERG BeNomic EasyLeaf Manuel utilisateur

Powermate

Powermate LiftGate LG-3 Manuel utilisateur

Snorkel

Snorkel TM12 Series Manuel utilisateur

Terberg

Terberg OMNIDEKA Manuel utilisateur

Harmar Mobility

Harmar Mobility AL625 Mode d'emploi

Rotary

Rotary SPO16 Manuel utilisateur