Timberwolf TW 18/100G Manuel utilisateur

timberwolf-uk.com

INSTRUCTION MANUAL

TW 18/100G WOOD CHI ER

The content of this publication may not be copied, reproduced, republished, posted, broadcast, transmitted

or used in any way in any medium without the written permission of Entec Industries Ltd.

CONTENTS

TIMBERWOLF

TW 18/100G

03.04.2017

Section Page No.

INTRODUCTION 1

PURPOSE OF MACHINE 2

MACHINE DIMENSIONS & SPECIFICATIONS 2

PARTS LOCATION DIAGRAMS 3

SAFE WORKING 5

Operator’s Personal Protective Equipment Required 5

Basic Woodchipping Safety 5

General SafetyMatters - Do’s and Dont’s 6

Noise Test 7

OPERATING INSTRUCTIONS 8

Safe Transportation 8

itching onto the Tow Ball 8

Unhitching the Chipper 8

Delivery 9

Operator’s Personal Protective Equipment Required 9

Engine Controls 9

Starting the Engine 9

Stopping the Engine 10

Daily Checks Before Starting 10

Starting to Chip 10

Chipping 10

Blade Wear 11

Blockages 11

SERVICE INSTRUCTIONS 12

Service Schedule 13

Engine Servicing 13

Spares 14

Safe Maintenance 14

Safe Lifting of the Chipper 14

Check Fittings 14

Copper Ease Safety Information 15

Battery Removal and Maintenance 15

Battery Safety Information 15

Change Blades 17

Tension Drive Belts 17

WARRANTY STATEMENT 18

EC DECLARATION OF CONFORMITY CERTIFICATE 19

IDENTIFICATION PLATE 20

DECALS 21

V-BELT TENSIONING DATA TABLE 23

PARTS LISTS 24

WARRANTY SERVICE CHECK RECORD 34

SERVICE RECORD 35

TIMBERWOLF

TW 18/100G

Thank you for choosing Timberwolf. Timberwolf chippers are designed to give safe and

dependable service if operated according to the instructions.

IMPORTANT HEALTH AND SAFETY INFORMATION

Before using your new chipper, please take time to read this manual. Failure to do

so could result in:

- PERSONAL IN URY

- EQUIPMENT DAMAGE

- DAMAGE TO PROPERTY

- 3RD PARTY IN URIES

This manual covers the operation and maintenance of the Timberwolf TW 18/100G. All

information in this manual is based on the latest product information available at the time

of purchase.

All the information you need to operate the machine safely and effectively is contained

within pages 2 to 11. Ensure that all operators are properly trained for operating this

machine, especially safe working practices.

Timberwolf's policy of regularly reviewing and improving their products may involve major

or minor changes to the chippers or their accessories. Timberwolf reserves the right to

make changes at any time without notice and without incurring any obligation.

Due to improvements in design and performance during production there may be, in

some cases, minor discrepancies between the actual chipper and the text in this manual.

The manual should be considered an important part of the

machine and should remain with it if the machine is resold.

CAUTION or WARNING

BE AWARE OF HIS SYMBOL AND WHERE

SHOWN, CAREFULLY FOLLOW

HE INS RUC IONS.

This caution symbol indicates important safety messages in this manual.

When you see this symbol, be alert to the possibility of injury to yourself

or others and carefully read the message that follows.

ALWAYS FOLLOW SAFE OPERA ING AND MAIN ENANCE PRAC ICES

INTRODUCTION

Engine type Briggs & Stratton V- win (electric start)

Maximum power 13.4kW (18hp)

Cooling method Air cooled

Overall weight 385kg

Starting method Electric

Blade bolt torque 22lbft - 30 Nm

General M10 bolt torque 34lbft - 46Nm

General M12 bolt torque 60lbft - 81Nm

Type of feed Gravity

Maximum diameter material 100 mm (4")

Material processing capacity 1.5 tonnes/hr

Fuel capacity 8.5 litres

Fuel type Unleaded petrol

Oil Capacity 1.4 litres

Oil Type SAE10W-30

TIMBERWOLF

TW 18/100G

The Timberwolf 18/100G brushwood chipper is designed to chip solid wood material up to 100

mm in diameter. It is capable of chipping over 1.5 tonne of brushwood per hour.

The Timberwolf TW 18/100G

TIMBERWOLF TW 18/100G ELECTRIC START SPECIFICATION

Serial No. Location

The serial number can

be found on top of the

rotor housing.

2065mm, (1570mm with discharge removed)

2910mm, (2560mm with feed tray closed)

1280mm

DIMENSIONS

FEED

FUNNEL

DISCHARGE

BUCKET

ROTOR

HOUSING

BELT

GUARD

TOW

HEAD

OCKEY

WHEEL

ASSEMBLY

DISCHARGE

TUBE

DISCHARGE

CLAMPS

DRAW BARCONTROL PANEL

FUEL

TANK

EXHAUST

SKID PLATE

RESTRAINING

CABLE

ID PLATE

ANTI-TRAP BAR

RAIN FLAP

REFLECTORS

TIMBERWOLF

TW 18/100G

PARTS LOCATOR

ROTOR

FAN SECTION (x 2)

CUTTER

BLADES

ENGINE DRIVE

PULLEY

DRIVE

BELTS

ROTOR DRIVE

PULLEY

DRIVE BELT

TENSIONER

PULLEY

BATTERY

COMPARTMENT

TIMBERWOLF

TW 18/100G

PARTS LOCATOR

SPARE

WHEEL

TIMBERWOLF 125PH

TIMBERWOLF

TW 18/100G

BASIC WOODCHIPPING SAFETY

he operator should be aware of the following points:

MAINTAIN A SAFETY EXCLUSION ZONE around the chipper of at least 10 metres for the

general public or employees without adequate protection. Use hazard tape to identify this

working area and keep it clear from debris build up. Chips should be ejected away from any

area the general public have access to.

AZARDOUS MATERIAL - Some species of trees and bushes are poisonous. The chipping

action can produce vapour, spray and dust that can irritate the skin. This may lead to

respiratory problems or even cause serious poisoning. Check the material to be chipped before

you start. Avoid confined spaces and use a facemask if necessary.

BE AWARE when the chipper is processing material that is an awkward shape. The material can

move from side to side in the funnel with great force. If the material extends beyond the funnel,

the brash may push you to one side causing danger. Badly twisted brash should be trimmed

before being chipped to avoid thrashing in the feed funnel.

BE AWARE that the chipper can eject chips out of the feed funnel with considerable force. Always

wear full head and face protection.

ALWAYS work on the side of the machine furthest from any local danger, e.g. not road side.

WARNING

The chipper will feed material through on its own. To do this, it relies on sharp

blades both on the feed rollers and the chipper rotor. To keep the blades sharp,

only feed the machine with clean brushwood. DO NOT put muddy/dirty wood,

roots, potted plants, bricks, stones or metal into the chipper.

OPERATOR'S PERSONAL PROTECTI E EQUIPMENT REQUIRED

Chainsaw safety helmet fitted

with mesh visor and

recommended ear defenders to

the appropriate specifications.

Work gloves with elasticated

wrist.

Close fitting heavy-duty

non-snag clothing.

Face mask if

appropriate.

DO NOT

wear rings, bracelets, watches,

jewellery or any other items that

could be caught in the material

and draw you into the chipper.

Steel toe cap safety boots.

SAFE WORKING

GENERAL SAFETY MATTERS

D O ’ S A N D D O N ’ T S

DO NOT operate chipper unless available light is

sufficient to see clearly.

DO NOT use or attempt to start the chipper

without the feed funnel, guards and discharge unit

securely in place.

DO NOT stand directly in front of the feed funnel

when using the chipper. Stand to one side.

DO NOT allow -

DO NOT smoke when refuelling.

DO NOT let anyone who has not received

instruction operate the machine.

DO NOT climb on the machine at any time.

DONOT handle material that is partially engaged

in the machine.

DO NOT touch any exposed wiring while machine

is running.

DO NOT use the chipper inside buildings.

- to enter the machine, as damage is likely.

ALWAYS stop the chipper engine before making

any adjustments, refuelling or cleaning.

ALWAYS check rotor has stopped rotating and

remove spark plug lead before maintenance of

any kind, or whenever the machine is to be left

unattended.

ALWAYS check the machine is well supported and

cannot move.

ALWAYS operate the chipper with the engine set

to maximum speed when chipping.

ALWAYS check (visually) for fluid leaks.

ALWAYS take regular breaks. Wearing personal

protective equipment for long periods can be

tiring and hot.

ALWAYS keep hands, feet and clothing out of feed

opening, discharge and moving parts.

ALWAYS use the next piece of material or a push

stick to push in short pieces. Under no

circumstances should you reach into the funnel.

ALWAYS keep the operating area clear of people,

animals and children.

ALWAYS keep the operating area clear from

debris build up.

ALWAYS keep clear of the chip discharge tube.

Foreign objects may be ejected with great force.

ALWAYS ensure protective guarding is in place

before commencing work. Failure to do so may

result in personal injury or loss of life.

ALWAYS operate the chipper in a well ventilated

area - exhaust fumes are dangerous.

BRICKS STRING CLOT PLASTIC STONES

METAL GLASS RUBBER ROOTS BEDDING

PLANTS

TIMBERWOLF

TW 18/100G

Noise levels above 80dB (A) will be experienced at the working position. Wear ear protection

at all times to prevent possible damage to hearing. All persons within a 4 metre radius must also

wear good quality ear protection.

SAFE WORKING

NOISE TEST

MACHINE: TW 18/100G

NOTES: Tested chipping 50 mm x 50 mm corsican pine 1.5m in

length

TIMBERWOLF

TW 18/100G

91.2 dB

96.7 dB

101 dB

R= 4 metres

Guaranteed Sound Power: 125dB (A)

109.3 dB

As required by Annex III of Directive 2000/14/EC “Noise Emission in the environment by equipment for use outdoors”.

R= 10 metres

95.5 dB

97.6 dB

Autres manuels pour TW 18/100G

Table des matières

Autres manuels Timberwolf Chipper

Timberwolf

Timberwolf TW 150VTR Manuel utilisateur

Timberwolf

Timberwolf TW 230VTR Manuel utilisateur

Timberwolf

Timberwolf TW PTO/100G Manuel utilisateur

Timberwolf

Timberwolf TW 230HB Manuel utilisateur

Timberwolf

Timberwolf tw pto 150h Manuel utilisateur

Timberwolf

Timberwolf TW 190TVGTR Manuel utilisateur

Timberwolf

Timberwolf TW 280HB Manuel utilisateur

Timberwolf

Timberwolf TW 190TFTR Manuel utilisateur

Timberwolf

Timberwolf TW 230HB (Diesel) Manuel utilisateur

Timberwolf

Timberwolf TW 150DH Manuel utilisateur

Timberwolf

Timberwolf TW150DHB Manuel utilisateur

Timberwolf

Timberwolf TW 18/100G Manuel utilisateur

Timberwolf

Timberwolf TW 280FTR (Petrol) Manuel utilisateur

Timberwolf

Timberwolf TW190TR Manuel utilisateur

Timberwolf

Timberwolf TW 280TVGTR Manuel utilisateur

Timberwolf

Timberwolf TW 18/100G Manuel utilisateur

Timberwolf

Timberwolf TW 150DH Manuel utilisateur

Timberwolf

Timberwolf TW 230DHB Manuel utilisateur

Timberwolf

Timberwolf TW 150VTR Manuel utilisateur

Timberwolf

Timberwolf TW 230DHB Manuel utilisateur

Timberwolf

Timberwolf TW 350DHBt Manuel utilisateur

Timberwolf

Timberwolf TW 230PAHB Manuel utilisateur

Timberwolf

Timberwolf TW PTO/100G Manuel utilisateur

Timberwolf

Timberwolf TW150DHB Instructions originales

Manuels Chipper populaires d'autres marques

Craftsman

Craftsman 79964 Manuel utilisateur

Frontier

Frontier WC1208 Manuel utilisateur

Viking

Viking GE 150 Manuel utilisateur

Victory

Victory WC-8H Manuel utilisateur

GTM Professional

GTM Professional GTS 1300 Manuel utilisateur

Yardbeast

Yardbeast YB3514 Manuel utilisateur

Patriot

Patriot Electric Motors Manuel utilisateur

Echo

Echo CH5540 Manuel utilisateur

DOSKO

DOSKO 13-21T-13H Manuel utilisateur

Craftsman

Craftsman 486.24516 Manuel utilisateur

Garland

Garland 1480 TQG Manuel utilisateur

Vermeer

Vermeer BC160XL Guide rapide

Value Leader

Value Leader z9400 Mode d’emploi

Salsco

Salsco 600PTO Manuel du produit

Cub Cadet

Cub Cadet 24A-424M710 Manuel utilisateur

Champion

Champion 91050 Manuel

Kellfri

Kellfri 13-WC17H2 Manuel utilisateur

Salsco

Salsco 813XT Manuel du produit