Tieman Optelec ClearView+ Manuel utilisateur

The user manual is A5 landscape format.

The covers need to be one-side color-printed on A4 paper 200 gram (PRT-00245)

separately!

- Front cover

- Back cover

The content pages need to be:

- black & white

- double-side printed

- on A4 paper 80 gram (PRT-00244)!

- starting from the first page of the English language manual (English - Page 1)

The following content pages need to be color printed:

First pages of the different languages (with Optelec logo)

Configuration pages in the appendix

Paper binder (PRT-00246): A5 length 297 mm

For the Binding instruction please refer to RFD-00321

Do not print this page!

Specification

Optelec ClearView

Zero Button

English Page 1

ClearView

Zero Button Feature Pack

User Manual

OPN: CV-FP-ZB, Version 1

P.O. Box 399

2990 AJ Barendrecht

The Netherlands

Phone: +31 (0)88 678 34 44

E-mail: [email protected]

Internet: www.optelec.com

Optelec ClearView

Zero Button

English Page 2

Contents

1. Introduction....................................................................................................... 3

About this manual............................................................................................. 3

2. Getting to know your Zero Button Feature Pack............................................... 4

3. Getting started.................................................................................................. 4

Switching On / Off............................................................................................. 5

AutoZoom functionality..................................................................................... 5

Reading documents.......................................................................................... 5

Viewing photos ................................................................................................. 6

Locking the reading table ................................................................................. 6

4. Adjusting the reading settings .......................................................................... 7

Opening the ClearView

configuration menu.................................................... 7

Menu buttons.................................................................................................... 8

AutoZoom......................................................................................................... 9

Mode ................................................................................................................ 9

Brightness ...................................................................................................... 10

Image control.................................................................................................. 10

Restore defaults ............................................................................................. 11

About.............................................................................................................. 11

5. Using configuration pages.............................................................................. 12

Optelec ClearView

Zero Button

English Page 3

1. Introduction

Congratulations on choosing the ClearView

with Zero Button Feature Pack, a

desktop video magnifier system with unique AutoZoom functionality designed by

Optelec.

The Zero Button Feature Pack features an enhanced design without operating

buttons that extends in reading comfort. Regardless of the document’s font size, the

integrated AutoZoom functionality automatically converts and displays printed

information in the preferred magnification and viewing mode. It is designed for

everyday use at home or in an educational or office setting.

If you have any questions or suggestions concerning the use of this product, please

contact your distributor or the Optelec headquarters using the contact information at

the last page of the ClearView

manual. Your feedback is greatly appreciated. We

hope you enjoy working with your ClearView

with Zero Button Feature Pack.

About this manual

This manual will familiarize you with the features and basic operation of the Zero

Button Feature Pack. Please read this manual carefully before using your device.

Optelec ClearView

Zero Button

English Page 4

2. Getting to know your Zero Button Feature Pack

The Zero Button Feature Pack is a module of the ClearView

. When installed, it is

integrated into the reading table.

The following figure shows the ClearView

with the Zero Button Feature Pack.

Wrist pad

On/Off button

Table brake

ero Button Feature Pack

Reading table

Optelec ClearView

Zero Button

English Page 5

3. Getting started

The ClearView

will start using its default settings the first time it is switched on. For

information on how to change the settings please refer to chapter 4.

Switching On / Off

Press the orange On / Off button located on the left side of the Zero

Button Feature Pack above the wrist pad to power both the system

and the monitor. A non-ClearView

monitor needs to be switched On /

Off separately.

AutoZoom functionality

The AutoZoom functionality automatically converts and displays the text placed on

the reading table in your preferred pre-set magnification and viewing mode.

Reading documents

Place a document on the reading table and make sure the information you wish to

read is visible in the centre part of the monitor. The AutoZoom function will

automatically adjust the text to your preferred pre-set magnification and reading

mode. Move the table left and right, up and down to read the document. If the text

contains a different font size, place the line with the smaller or larger font size in the

centre of the screen. After approximately 2 seconds, the AutoZoom functionality will

Optelec ClearView

Zero Button

English Page 6

automatically adjust to the pre-set magnification. While reading, rest your arms on

the comfortable wrist pads for optimal reading comfort.

Viewing photos

The Zero Button Feature Pack features automatic photo detection enabling you to

view photos and images. The ClearView

will automatically switch to full color photo

mode when a picture or image has been detected. When placing text under the

camera, the AutoZoom functionality will automatically switch back to the pre-set

reading settings. Continuously moving the table after a photo has been detected

enables you to view the complete document in full color photo mode in minimum

magnification.

Locking the reading table

To lock the reading table locate the red lever on the

underside of the Zero Button Feature Pack at the front

of the table as illustrated in the figure. Press the red

lever upwards to lock the table movement. Unlock the

table by pressing the lever upwards again.

Note: When the ClearView

is switched off, the reading table will automatically be

locked. Before switching off the unit make sure to position the reading table in its

“home” position. The reading table stands in the “home” position when it is pushed

against the backside of the unit aligning with the sides.

Optelec ClearView

Zero Button

English Page 7

4. Adjusting the reading settings

The default reading settings can be adjusted via the configuration menu or by using

the configuration pages at the end of this manual. To change the reading settings

place a text document on the reading table of the ClearView

. While configuring the

settings using the menu the adjustments will be immediately visible on the screen.

For information on how to use the configuration pages, please refer to chapter 5.

Opening the ClearView

configuration menu

To open the ClearView

configuration menu please remove the left wrist pad of the

Zero Button Feature Pack:

Lift up the left part of the

Zero Button wrist pad

until you hear a click

Pull the left wrist pad

towards you

Remove the left wrist pad

1. 2. 3.

Table des matières

Autres manuels Tieman Loupe

Tieman

Tieman Optelec Traveller+ Manuel utilisateur

Manuels Loupe populaires d'autres marques

HIMS

HIMS SenseView DUO Manuel utilisateur

nedis

nedis MAGL12WWT Manuel utilisateur

Ryobi

Ryobi RML18-0 Manuel utilisateur

Eschenbach

Eschenbach Visolux Digital XL FHD Manuel utilisateur

ENHANCED VISION

ENHANCED VISION Merlin Manuel utilisateur

Ash Technologies

Ash Technologies Andromeda Manuel utilisateur

Baum

Baum VisioBook Manuel

HIMS

HIMS GoVision PRO Manuel utilisateur

OPTRON

OPTRON i-Stick Manuel utilisateur

Eschenbach

Eschenbach visolux DIGITAL HD Manuel utilisateur

LS & S

LS & S 251107 Manuel utilisateur

VisionAid

VisionAid HandyReader HD v2 Manuel utilisateur

Carson

Carson SV-50 Manuel utilisateur

MAGINON

MAGINON TL-70 Manuel utilisateur

Optelec

Optelec Compact 7 HD Manuel utilisateur

Optelec

Optelec ClearView GO Manuel utilisateur

Carson

Carson Lighted MagniGrip MG-88 Manuel utilisateur

VisionAid

VisionAid Helix HD Manuel utilisateur