Tibo TI435 DAB Manuel utilisateur
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
TI435 DAB – User
Manual
!
Contents
•Safety Information
•Introduction
•First time system setup
•DAB mode
•FM mode
•Using the pre-set functions
•Additional Information
•Troubleshooting
•Specifications
•Safety Information
Do not share the power socket with another
appliance.
Do not disassemble or attempt to repair the
appliance on your own.
lf you are not using the appliance, pull the power
cord out of the mains socket.
Be careful of the power cord and maintain it as
appropriate.
To ensure safety, do not twist the power cord, do
not pull it out of the socket, do not compress it or
stretch its length.
Do not use the appliance if the supply voltage is
lower than 90V or higher than 240V.
If the supply voltage is lower than 90V, the
appliance may not work and its lifetime may be
affected. lf the voltage is higher than 240V, the
appliance may catch on fire or cause a fire.
Do not wash the appliance or use it in the
bathroom, or it may cause potential injuries and
other problems.
Installation location
Leave sufficient space around the appliance of at
least 5 cm from any wall/obstacle to ensure proper
ventilation and prevent the appliance from
overheating.
The following places are not suitable installation
locations for the appliance:
•An unstable location
•A location near a heat source or in direct
sunlight.
•In a wet or dusty environment
Warning
To prevent suffering an electrical shock or another
accident, do not operate the appliance in a rainy or
humid environment.
Cleaning and maintenance
Use a soft cloth or cotton dipped in a neutral
solution for cleaning the surface of appliances. Do
not use the type of cloth that you use for washing
dishes or aggressive chemical agents.
Storm
lf the appliance is not working properly during a
storm, please disconnect the plug from the power
socket and reinsert it after a minute.
Do not drop small items or a liquid into the
appliance
In the event that you find small items or a liquid
inside the appliance, you see smoke or smell an
odour, immediately disconnect the appliance from
the power grid. Send the appliance to an authorised
service centre.
Repacking the appliance
When sending the appliance by a transport
company, use the original packaging to prevent its
damage during transport.
•Introduction
Thank you for purchasing the TIBO TI435 DAB
Tuner. We hope that your experience with the
Tuner will be enjoyable for many years to come.
With both DAB+ (Digital Audio Broadcasting plus)
and FM tuners on-board, the TIBO DAB 435 is
ideally equipped for listening to a wide range of
stations. Select DAB+ and you’ll be able to listen to
a vast range of digital radio stations, including the
popular BBC 6 Music, 4 Extra and 5 live. DAB+ also
lets you hear crisp, digital clarity of sound, free from
interference. For local stations or a more expansive
sound with national stations (roof mounted aerial
recommended) then FM is also on hand.
The TIBO TI435 DAB+ has 18 pre-sets that are
clearly accessible. (9 pre-sets for DAB mode and 9
for FM mode.) The large display is equally clear and
informative. To select stations, the simple twist and
push rotary knob makes it intuitive to use. The
simple, logical button layout makes for a design
that’s clean and easy on the eye. The Aluminium
casing is solid and fronted by a metal facial panel
that you’d usually only see on much more
expensive tuners.
•First time system setup
In the box
- TI435 DAB Tuner
- UK figure 8 plug
- EU figure 8 plug
- Remote control
- Quick start guide
- Radio aerial
Front panel layout
1) IR Remote Control Sensor
2) Info Button: Information about current radio
frequency and time
3) Scan Button: To pick up nearby radio
frequencies
4) DAB / FM: Switch between DAB and FM mode
5) Display Screen: Displays current radio frequency
and information
6) Central Dial: Long press to turn on/standby
- Short press to select desired radio station
- Turn dial to browse through nearby radio
stations
7) Direct Pre-set buttons: 9 pre-sets in DAB mode
and 9 pre-sets in FM mode
8) Aerial
Rear panel layout
1) Aerial Port
2) Line Out: Left / Right
3) AC Select
4) Mains Port
5) Power switch
Remote Control
1) Power On / Standby
2) Volume Up / Down: (N/A for the model)
3) Info Button: Press to view information about
current radio station
4) Mode Button: Switch between DAB and FM
mode
5) Light Button: Change the colour of the outer ring
surrounding the central dial
6) 10+ Button: (N/A for this model)
7) Preset Buttons 1-9: Recall direct pre-sets in FM
and DAB mode
8) Mute Button: (N/A for this model)
9) Skip forward / backward to the next radio
frequency
10) Play / Pause Button: Play desired radio
frequency
11) Select Button: Select desired radio frequency
12) Scan Button: Automatically scan for nearby
radio frequencies
13) Shift Button: (N/A for this model)
14) Group Button: (N/A for this model)
Initial setup steps
1) Find the radio aerial and screw into the aerial
port on the rear of the Tuner.
2) Connect your Tuner to an amplifier using the
RCA line out port. Connect to the appropriate RCA
line in port on the amplifier.
3) Insert the appropriate mains cable into the rear of
the Tuner and turn on your power source. Make
sure your amplifier is also turned on and connected
to speakers.
4) Turn on the power switch at the rear of the
Tuner. The front panel should light up and display
the time. This means it is in standby mode.
5) Press and hold the dial on the front panel of
Tuner or the power on button on the remote control
to turn on the Tuner.
6) When turned on, you should hear the Tuner say
“Power on, DAB/FM mode”.
Autres manuels pour TI435 DAB
1
Table des matières
