86 7
To make a call from the Base Terminal, dial
+<country code><phone number> and press key or wait for 4
seconds to start auto dialing
or
00 <country code> <phone number> and press key or wait for 4
seconds to start auto dialing
Note:
For voice calls and SMS, you may also use '+'by pressing and holding the
key instead of “00” at the beginning of dialed number string as
an alternave('+' <country code> <phone number>).
To end the call, re-place the handset on the cradle
To accept an incoming call, li up the handset from the cradle
Sending the first SMS (Message)
Follow these steps to send the first SMS:
1. While in the Home screen, press the key or Le Funcon key
to enter the Main Menu
2. The Main Menu will be displayed on the screen
3. Using the 4-Way navigaon buons, navigate to the Messages icon
9 10
4. Press Key to confirm selecon. The SMS Viewer will be displayed on the
screen
5. Press Le Funcon key to show the New Message opon
6. Press Key into the SMS eding mode
7. Type in your SMS message using 4-Way navigaon buons and the alphanumeric
keypad
Tips for add SMS contacts:
To add a +, press and hold the key.
Tips for wring text:
To add a space, press the key.
To quickly change the text input method when wring text, press
repeatedly end check the indicator at the top of the display:
< a >: English input method
<123>: Numbers input
To add a number, press and hold the desired number key.
Insert symbols to your message:
To get a list of special symbols, press
Using the 4-Way arrow key, navigate to the desired symbol.
To clear text, press Clear key once to clear one character at a me.
Press to confirm selecon.
Clearing text:
To clear the whole text entry, press and hold the Clear key to clear
the whole text entry.
5
When these characters are displayed, that means no SIM card insert or insert
wrong SIM card, please restore the original SIM card and restart SeaStar to
go out of the protected mode.
Handset locking mechanism:
When placed on hook, the handset is locked onto the cradle. When going
off-hook (picking up the handset from the cradle), please make sure to push
the handset forward before liing it off the cradle
When you are replacing the handset, make sure it is locked onto the cradle
If dialing without OFF-HOOK, the screen will prompt with the next figure
Receiving a call
When there is an incoming call, the SeaStar terminal will:
Ring
The calling party's number will be displayed on the screen
The corresponding name of contact will be displayed if the number is stored in
the contacts
To answer an incoming call, Pick up the handset from the cradle or if connected the
analogue phone.
Adjusng volume during a call
Use Le / Right Funcon Key adjust the volume.
