Thrustmaster Ferrari Manuel utilisateur

ﻡﺩﺧﺗﺳﻣﻟﺍ ﻝﻳﻟﺩ -

Click on your language below

- Εγχειρίδιο χρήσης

- Kullanım Kılavuzu

- Podręcznik użytkownika

1/12

For: PlayStation®3 / PlayStation®3 Slim / PC

User Manual

TECHNICAL FEATURES

1. Handles

2. 2 progressive analog mini-sticks

3. D-Pad

4. Progressive optical wheel

5. 2 progressive triggers

6. HOME LED button for Playstation®3

and MODE for PC

7. MAPPING LED button (for programming

and indicating connection status)

8. PRESET LED button

(to select programming)

9. Action buttons

10. PC and PlayStation®3 USB connector

11. “PC” or “PS3” USB selector

12. CONNECT LED button on receiver

13. Battery compartment

14. POWER ON/OFF switch

2/12

TABLE OF SUPPORTED MODES

Platform MODE

Color of HOME button

(6)

PLAYSTATION®3

“PS3”

RED

“4 AXES”

GREEN

“7 AXES”

RED

INSTALLING BATTERIES

Insert 2 LR03 / AAA type batteries in the battery compartment situated on the back of the gamepad (13).

OVERVIEW

•POWER ON/OFF switch (14)

- OFF position = the gamepad is off (and doesn’t use up batteries).

- ON position = the gamepad is on.

•“PC / PS3” USB selector (11)

Must always be set to the correct position before connecting your receiver’s USB connector.

•MAPPING (7) and CONNECT (12) blue LEDs

- Both LEDs are on = connection established between gamepad and receiver.

- Both LEDs flash quickly = no connection between gamepad and receiver.

- The MAPPING LED is off = the gamepad is in standby mode or powered off.

- The MAPPING LED flashes slowly & continuously = please change batteries.

THE CONNECTION BETWEEN THE GAMEPAD AND RECEIVER

IS ESTABLISHED AUTOMATICALLY

To force the connection in case of error: press the CONNECT button on the receiver

and simultaneously press the L2 + R2 + MAPPING buttons on your gamepad.

•STANDBY MODE

The gamepad switches off automatically:

- After 5 minutes of inactivity

- After 5 seconds in the event of error or loss of connection.

To wake up your gamepad: press START or use the POWER ON/OFF switch (14).

3/12

PLAYSTATION®3

INSTALLATION ON PLAYSTATION®3

1. Set your receiver’s USB selector to the “PS3” position.

2. Connect the USB connector to USB port #1 on the console.

3. Switch on your console.

4. Switch on your gamepad using the POWER ON/OFF switch (14).

5. Once a connection has been established: start up your game.

You are now ready to play!

PLAYSTATION®3 MODE

“AUTOMATIC PRESET” CONFIGURATION - PLAYSTATION®3

PS3 mode

Red HOME button

Here:

•“Optical wheel” associated

with “Left/Right” direction on

left mini-stick

•“Right trigger” associated with

progressive “R2” button

•“Left trigger” associated with

progressive “L2” button

USING THE “HOME” BUTTON (6)

Your gamepad’s “HOME” button allows you to exit games, access menus and directly switch off your

PlayStation®3 system.

IMPORTANT NOTES FOR PLAYSTATION®3

- The USB selector on your receiver (11) must always be set to “PS3” before connecting the receiver.

- In “1 Player” mode: If your official gamepad is powered on, you must switch it to “gamepad port 2” in

order for your “Run’N’ Drive” gamepad to be functional.

- On PlayStation®3, the “Run’N’ Drive” gamepad is only compatible with PlayStation®3 games (and will

not work with PlayStation® 2 games) and does not feature a motion sensor.

4/12

INSTALLATION ON PC

1. Set the USB selector on the receiver (11) to the “PC” position.

2. Connect the receiver’s USB connector to one of your computer’s USB ports. Windows® XP or Vista

will automatically detect the new device.

3. Switch on your gamepad using the POWER ON/OFF switch (14).

4. Click Start/Settings/Control Panel and then double-click Game Controllers.

The Game Controllers dialog box displays the gamepad’s name with OK status.

5. In the Control Panel, click Properties to test and view the buttons, D-pad, mini-sticks, triggers and

optical wheel.

You are now ready to play!

IMPORTANT NOTES FOR PC

- The USB selector on your receiver (11) must always be set to “PC” before connecting the receiver.

- The name of the gamepad displayed on PC (in the Control Panel and in games) is "Run N' Drive Wireless".

- “Advanced Programming Software” for PC is also available for download on our website at the following

address:

http://ts.thrustmaster.com/

- The "Test forces" tab (of the advanced programming software) is not compatible with this gamepad.

5/12

SELECTING “AXES” ON PC

•Selecting axes via “Software”:

After installing the “Advanced Programming Software”, go to page 1 of the Control Panel, click the

number of axes you wish to use and then click OK.

•Selecting axes via “Hardware”:

Press the HOME button (6) to select the number of active axes.

2 “AXES” MODES AVAILABLE ON PC

“AUTOMATIC PRESET” CONFIGURATION - PC

“4 AXES” mode

Green HOME button

Here:

•“Optical wheel” associated with

“Left/Right” direction on left

mini-stick

•“Right trigger” associated with

“Up” direction on right mini-

stick

•“Left trigger” associated with

“Down” direction on right mini-

stick

“7 AXES” mode

Red HOME button

Here:

•“Optical wheel” is now independent

•“Right trigger” is now independent

•“Left trigger” is now independent

To find out all of the possibilities offered on PC,

try them out in the Windows “Game Controllers” section

(once you have installed the “Advanced Programming Software”)

6/12

ADVANCED FUNCTIONS

ADJUSTING THE OPTICAL WHEEL’S SENSITIVITY

The optical wheel (4)has 2 sensitivity modes:

- Normal sensitivity (the default mode)

- High sensitivity (must be set)

•Setting “High Sensitivity” mode:

Steps

Action

HOME button

Raise and hold the “UP” direction on the optical wheel

Flashes continuously

Press and release the MAPPING button (7)

Your optical wheel is now more sensitive

(Procedure must be carried out each time the gamepad restarts or is disconnected)

•Returning to “Normal Sensitivity” mode:

Steps

Action

HOME button

Lower and hold the “DOWN” direction on the optical wheel

Does not flash

Press and release the MAPPING button (7)

Your optical wheel has now returned to Normal Sensitivity (the default mode)

2 PROGRAMMING MODES

The PRESET button and LED (8) allows you to view the type of programming selected:

AUTOMATIC (preprogrammed) or MANUAL (programmed by yourself). A single press of this button

allows you (even during the course of a game) to switch from one programming mode to the other.

•“AUTOMATIC PRESET” (PRESET button OFF)

This represents the default programming: the functions of the optical wheel and the triggers are

preprogrammed, as are the positions of the buttons and the directions of the mini-sticks and of the D-Pad.

PLEASE REFER TO THE “AUTOMATIC PRESET” CONFIGURATION DIAGRAMS

•“MANUAL PRESET” (PRESET button GREEN)

This represents your own personal programming:

- The buttons, directions of the mini-sticks and of the D-Pad can either be

* programmed on the optical wheel and on the triggers,

* or switched between themselves.

- You can modify the programming to your liking and whenever you wish.

- The programming is automatically saved inside your gamepad (even when disconnected).

- When your “MANUAL PRESET” is clear, it is identical to the “AUTOMATIC PRESET”.

7/12

PROGRAMMING THE OPTICAL WHEEL AND TRIGGERS

The 2 directions of the optical wheel and the 2 progressive triggers can be programmed using the

MAPPING button (7).

•Examples of possible applications:

Programming a button, direction of a mini-stick or of the D-Pad:

- onto the “up” or “down” direction of the optical wheel

- onto the “right trigger” or “left trigger”

•Programming procedure on optical wheel and triggers:

Steps Action

PRESET button

color

Enable “MANUAL PRESET” (8) by pressing the button.

Lit up green

Press and release the MAPPING button (7).

Lit up red

Press and release the button or direction to program.

Flashes red

Raise or lower the direction on the optical wheel

or press the trigger onto which you wish to place your function. Lit up green

Your “MANUAL PRESET” is now enabled and up to date

(with your programming applied to the optical wheel or triggers)

SWITCHING BUTTONS/MINI-STICKS/D-PAD

All buttons, as well as directions of the mini-sticks and of the D-Pad can be switched using the MAPPING

button (7).

•Examples of possible applications:

- Switch buttons between themselves

- Switch the 2 mini-sticks

(in this case, you will to have to map the 4 directions of the first mini-stick to the 4 directions of the

second mini-stick)

- Switch the D-Pad with a mini-stick

(in this case, you will have to map the 4 D-Pad directions to the 4 directions of the mini-stick in

question).

•Procedure for switching buttons, mini-sticks and D-Pad

- Does not work for the triggers.

- Works for the optical wheel but only on PC and in “7 axes” mode.

Steps Action

PRESET button

color

Enable “MANUAL PRESET” (8) by pressing the button.

Lit up green

Press and release the MAPPING button (7).

Lit up red

Press and release the button or direction to switch.

Flashes red

Press and release the button or direction onto which you wish to

place your function. Lit up green

Your “MANUAL PRESET” is now enabled and up to date (with the 2 functions switched).

8/12

EEPROM MEMORY

•Your gamepad features an internal chip which saves all of your “MANUAL PRESET”

programming (even when the gamepad is switched off or disconnected for a long period of

time).

•You can save a different “MANUAL PRESET” for each platform used: PlayStation®3, PC 4

Axes and PC 7 Axes.

TO ERASE YOUR “MANUAL PRESET”

Steps Action

PRESET button

color

Enable your “MANUAL PRESET” (8).

Lit up green

2 Press and hold the MAPPING button (7) for 2 seconds.

Flashes green 2

seconds

Your “MANUAL PRESET” is now clear (and once again identical to the “AUTOMATIC PRESET”).

RETURNING TO “FACTORY SETTINGS”

You can erase all of your programming or settings:

Steps

Action

MAPPING button color

Press the MAPPING + SELECT + START buttons

simultaneously

Flashes blue 5 seconds

All of your “MANUAL PRESETS” (= PC + PS3) or settings are now clear.

Note: this procedure will completely restart your gamepad

(on PC, we therefore recommend that you do this outside of games).

POSSIBLE USES IN GAMES

The optical wheel (thanks to its technology and degree of rotation greater than that of any mini-stick)

offers unparalleled precision and stability in all types of games: racing (ultra-precise steering), flying

(rudder), action and FPS (progressive zoom), sports (measured shot, strength of hit), etc.

The triggers (thanks to their progressive action and range of mechanical travel greater than that of any

button) offer extremely precise control in all types of games: racing (progressive and independent

acceleration and braking, handbrake), action and FPS (rate of fire, lateral movement), sports (measured

pass or shot, strength of hit or jump, running speed), etc.

SOME EXAMPLES AND TIPS:

- There are numerous configuration possibilities, depending on the game you are playing.

- In certain games (racing type), do not hesitate to test out the 2 sensitivity modes for your optical wheel

(Normal or High) in order to optimize its precision and responsiveness.

9/12

DIFFERENT EXAMPLES ACCORDING TO TYPE OF GAME

Action/Adventure (“Car” mode)

Action/Adventure (“On foot” mode)

Sports (“Ball game” type)

Sports (“Golf” type)

Car racing (“Simulation” type)

Car racing (“Arcade/Rally” type)

Flying (“Simulation” type)

Flying (“Arcade/Action” type)

Table des matières

Langues :

Autres manuels Thrustmaster Manettes de jeux vidéo

Thrustmaster

Thrustmaster T60 Manuel utilisateur

Thrustmaster

Thrustmaster T.16000M Manuel utilisateur

Thrustmaster

Thrustmaster Thrustmaster Force Feedback Racing Wheel Manuel utilisateur

Thrustmaster

Thrustmaster T150 Manuel utilisateur

Thrustmaster

Thrustmaster RUN'N'DRIVE 3-IN-1 RUMBLE FORCE Manuel utilisateur

Thrustmaster

Thrustmaster Red Legend Edition Manuel utilisateur

Thrustmaster

Thrustmaster TS-XW RACER Sparco P310 Competition Mod Manuel utilisateur

Thrustmaster

Thrustmaster TX Leather Edition Manuel utilisateur

Thrustmaster

Thrustmaster Ferrari F1 Wheel Add-on Manuel utilisateur

Thrustmaster

Thrustmaster 360 Modena Force GT Manuel utilisateur

Thrustmaster

Thrustmaster T500 RS Manuel utilisateur

Thrustmaster

Thrustmaster T-WIRELESS 3-IN-1 RUMBLE FORCE Manuel utilisateur

Thrustmaster

Thrustmaster universal challenge Instructions d'utilisation

Thrustmaster

Thrustmaster T300 RS Manuel utilisateur

Thrustmaster

Thrustmaster FERRARI 488 GT3 WHEEL ADD-ON Manuel utilisateur

Thrustmaster

Thrustmaster TCA Quadrant Add-On Airbus Edition Manuel utilisateur

Thrustmaster

Thrustmaster Ferrari GT Manuel utilisateur

Thrustmaster

Thrustmaster HOTAS WARTHOG Instructions d'utilisation

Thrustmaster

Thrustmaster eSwap X Pro Manuel utilisateur

Thrustmaster

Thrustmaster HOTAS Cougar Instructions d'utilisation

Thrustmaster

Thrustmaster F/A-18C HORNET Manuel utilisateur

Thrustmaster

Thrustmaster T300 Manuel utilisateur

Thrustmaster

Thrustmaster T80 Ferrari 488 GTB Edition Manuel utilisateur

Thrustmaster

Thrustmaster 360MODENA UPAD FORCE Instructions d'utilisation

Manuels Manettes de jeux vidéo populaires d'autres marques

Wasp

Wasp SL-6610 Manuel utilisateur

JKG

JKG JKG2022A Manuel utilisateur

Marvo

Marvo MG08 Manuel utilisateur

Belkin

Belkin F8GBPC001 Manuel utilisateur

GameSir

GameSir Z2 Manuel utilisateur

Laser

Laser PCO-AGAMEC-BK Manuel utilisateur

Cortex

Cortex VEXnet Manuel utilisateur

Gioteck

Gioteck HF-1 Manuel utilisateur

Nacon

Nacon DAIJA ARCADE STICK Manuel utilisateur

SHAKS

SHAKS S1+ Manuel utilisateur

YCCTEAM

YCCTEAM Joy Con Manuel utilisateur

Hyperkin

Hyperkin Smartboy Manuel utilisateur

Nerf

Nerf DuraGrip Manuel utilisateur

MoveMaster

MoveMaster MoveMaster Manuel utilisateur

WinWing

WinWing Super Libra J1 Manuel utilisateur

ECCI

ECCI Trackstar 6000 Series Manuel utilisateur

Logitech

Logitech 963291-0403 - Attack 3 Joystick Manuel utilisateur

Pelican

Pelican Afterglow PL-678 Manuel utilisateur