THRIVE AGRITECH Boost Manuel utilisateur

___________________________________________________________________________

www.thriveagritech.com

info@thriveagritech.com

800-205-7216

___________________________________________________________________________

www.thriveagritech.com

[email protected]

800-205-7216

Table of Contents

Introduction.......................................................................................................................................... 3

Equipment ............................................................................................................................................ 3

General Guidelines............................................................................................................................... 4

Daisy-Chaining...................................................................................................................................... 4

Permanent Installation Instructions.................................................................................................... 5

Temporary/Test Installation Instructions ........................................................................................... 7

___________________________________________________________________________

www.thriveagritech.com

[email protected]

800-205-7216

Introduction

This manual provides installation instructions for the Boost and Infinity 2.0 LED light bars for under canopy

lighting. Instructions are provided for large scale permanent installations as well as temporary test/trial

installations. Please contact customer support with any questions not covered in this guide.

Equipment - Permanent Installation

Required Equipment

•LED Light Bars, Thrive Agritech part number BST-130W-FS2 (recommended) or TBAR-65W-FS2

•Slide & Lock Clips, Thrive Agritech part number SLCLIP, Quantity 2 for each light bar

•Interconnection Clips, Thrive Agritech part number INCLIP-BD, Quantity 1 for each light bar

•Power Cables, Thrive Agritech, several lengths and connector options to choose from

•1.5” x ¼in.-20 bolts & matching nuts, 2 sets for each light bar

•Adjustable trellis mounting structure with steel or aluminum square tubing

oRecommended supplier: Innovative Growers Equipment

(https://www.innovativegrowersequipment.com/plant-support-system-trellis)

oAlternate source of square tubing: Unistrut (https://www.unistrut.us/products/telestrut-

system/telestrut-products)

Equipment - Temporary Test Installation

Required Equipment

•LED Light Bars, Thrive Agritech part number BST-130W-FS2 (recommended) or TBAR-65W-FS2

•Power Cables (Thrive Agritech), several lengths and connector options to choose from

•Interconnection Clips, Thrive Agritech part number INCLIP-BD, Quantity 1 for each light bar

•Structure to support the light bars

oRecommended support: 4”-8” container pot

Optional Equipment

•Unistrut square tubing (https://www.unistrut.us/products/telestrut-system/telestrut-products)

•Slide & Lock Clips (Thrive Agritech)

•¼”-20 bolts & matching nuts, 2 sets for each light bar

___________________________________________________________________________

www.thriveagritech.com

[email protected]

800-205-7216

General Guidelines

•Confirm the overall integrity of the light bar prior to installation.

•Maintain at least 8 inches (0.2 meters) between the light fixture and any combustible materials.

•Keep the light fixture away from sources of heat.

•The LED light is an indoor fixture operated within an ambient temperature range of -20oC to 30oC.

•Ensure power is off before installation. Installation must be carried out by qualified electricians.

•To clean the light fixture, switch power off and use a dry cloth without corrosive cleaning agents.

Daisy-Chaining

The maximum number of lights that can be daisy-chained together at various input voltages is shown in the

tables below. Also shown is the nominal current supplied to each fixture. 16AWG wire is recommended.

Boost LED Light

Parameter

120 Volts

240 Volts

277 Volts

Nominal current / fixture

1.1A

0.55A

0.48A

Max # of fixtures linked together in

a daisy-chain

7 fixtures

12 fixtures

16 fixtures

Infinity 2.0 LED Light

Parameter

120 Volts

240 Volts

277 Volts

Nominal current / fixture

0.54A

0.27A

0.23A

Max # of fixtures linked together in

a daisy-chain

10 fixtures

20 fixtures

30 fixtures

___________________________________________________________________________

www.thriveagritech.com

[email protected]

800-205-7216

Permanent Installation Instructions

1) Prepare the adjustable trellis support structure as shown in Figure 1. Adjust the square tubing to the

desired height. The lights will be mounted to the square tubing in subsequent steps.

2) For each light bar, attach 2 slide & lock clips (SLCLIP)

to the square tubing using ¼”-20 bolts (Figure 2). A

hole may need to be drilled through the square

tubing for the bolt. The clips should be positioned

approximately 6”-8” from where the ends of the

light bars will be located.

3) Attach the light bars to the main center clips shown

in figure 2 but leave the locking arms disengaged to

allow the lights to slide and connect with each other

(Figure 3).

Figure 1

Square Tubing

Figure 2

Figure 3

___________________________________________________________________________

www.thriveagritech.com

[email protected]

800-205-7216

4) Once the lights are connected, attach the interconnection clip (INCLIP-BD) as shown in Figure 4 to

secure the lights mechanically and electrically.

5) Compress the locking arms of the slide & lock clips (SLCLIP) to prevent the lights from moving along

the length of the square tubing (Figure 5).

6) Repeat steps 1-5 for all under canopy lights in the grow room. Note the maximum number of lights

that can be connected (daisy-chained) is shown on page 4 of this guide and on the light bar product

datasheet.

7) Connect power cables to lights.

Locking Arms in

“locked” position

Interconnection Clip

(INCLIP-BD)

Figure 4

Slide & Lock Clip

(SLCLIP)

Figure 5

___________________________________________________________________________

www.thriveagritech.com

[email protected]

800-205-7216

Temporary/Test Installation Instructions

For a temporary setup of under canopy lighting for the purpose of testing / trials, a simpler and faster

installation method is often preferred.

1) Place a container pot every 4-feet along the length of the test bench where the connection points of

the lights are anticipated (Figures 6 & 7).

2) Connect two light bars together using the interconnection clip

(INCLIP-BD) as shown in Figure 8 to secure the lights

mechanically and electrically. Place connected light bar

assembly on top of the container pots with the connection

point (interconnection clip) resting on the container pots.

3) Repeat steps 1 & 2 for the entire test bench or test grow room.

4) Connect power cables to lights.

5) Optional: For a more robust and flexible test setup, use the installation method described in the

prior section for a permanent installation.

Figure 6

Figure 7

4”-8” Container Pot

4 Feet

Connection

Point

Interconnection Clip

(INCLIP-BD)

Figure 8

Autres manuels pour Boost

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels THRIVE AGRITECH Équipement d'éclairage

THRIVE AGRITECH

THRIVE AGRITECH Boost Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur