THOMSON CR300IVCA Guide de l'utilisateur
SMARTAUDIO
CR300IVCA
Last update: March 15, 2020
Application Instruction Manual
CR300IVCA – Application Instruction Manual
Connecting your speaker to the network
Connecting with the Smartaudio app
Search for the Smartaudio app in Google Play Store (Android)
Or Apple APP Store (iOS). Download and install.
Also ensure that you have also installed the official Amazon Alexa app.
Power up your speaker and wait for the sound to advise that you
are in set up mode.
You will hear three beeps and the light ring will flash in white
and blue colour. Launch the app so it can search for the new
speaker. Press the ‘Add Device’ button to confirm that you wish to
add a new speaker. Click on the device list and select the
CR300IVCA from the device list and select ‘Connect Speaker.
CR300IVCA – Application Instruction Manual
The app will direct you to go to the Wi-Fi settings page. Go
to the Wi-Fi settings on your phone and connect your mobile
phone to the speaker. Look for the Wi-Fi name
CR300IVCA_XXXX
Note that it is best to have your speaker close to your router
during this part to ensure a good Wi-Fi signal.
Once you are connected, the speaker will beep twice and
flash an amber colour. You and you can return to the app to
continue set up.
Select your home Wi-Fi network and enter the correct
password for your Wi-Fi.
If connection is successful, the speaker will beep and the
light will turn green to indicate you that it is connected to
your network. It will also show you the signal strength from
your router to your speaker. Press ‘Next’ to complete set
up.
CR300IVCA – Application Instruction Manual
NOTE
Once the speaker is successfully connected, its SSID (Wi-Fi name) will be
automatically hidden for network security. If you would like the speaker to
release its SSID and be visible again for a new set up, press and hold the Wi-
Fi \ BT button until the speaker beeps and the light ring flashes white again.
You can then re-name your speaker or name it according to the room it is
located in, i.e. Kitchen speaker or Bedroom speaker. Once named, press
the icon in the top right to go to the Alexa account set up page.
Keep it simple as this name will be used to identify the speaker later when
using voice commands.
CR300IVCA – Application Instruction Manual
You need to have an active Amazon
account to use the Alexa service, so if you
do not already have an account you will
need to sign up. If you have an account,
just follow the onscreen instructions to link
your speaker to your account. Ensure that
you enter your usual Amazon account
email address and password and select
your preferred language.
Note: You will also need to install the Alexa app to
enable certain services, so please ensure that you
also install this on the same mobile device.
If at any time you wish to disable the
listening microphone you simply press
the button indicated on the next app
screen. Press Next to continue.
Once you have completed the set-up,
your speaker will appear in the device
list of your app. From here you can see
all of the Smartaudio speakers
connected to your network.
CR300IVCA – Application Instruction Manual
The apps Main Interface
Select here to enter the speaker settings
Control the volume level with the slider control
Press the LR button if you have 2 speakers and wish to split them to left and right channels
If you wish to add another Smartaudio speaker to your network, press the + icon in the top right
corner.
Rename your speaker
Check the full connection details and speaker info
Set an alarm
Select your pre-sets
Adjust your Alexa settings
CR300IVCA – Application Instruction Manual
Now simply press the ‘SMARTAUDIO’ text in the top left corner and keep pressing the back arrow to navigate back to the main
Device list of your app. Then sweep right to reveal the music player screen of your app.
Swipe right again to access your music sources including
local stored music and your favourite streaming services.
Select My music to play music from your device or local
network
Select Tune in for Internet Radio
Select Spotify, Deezer, etc for streaming from your
preferred streaming service.
CR300IVCA – Application Instruction Manual
Setting the language for prompts
Once you have connected your speaker and you are familiar with app, you can change your language for voice prompts. This will
give you information about the different modes and any issues that may occur during operation.
If you do not wish to change your language you can skip this part.
To do this follow the instructions below.
1. Select the settings icon on the Device list screen.
2. Select ‘Speaker info’
3. Scroll down the page and select the ‘Audio prompts Language’ setting.
4. Then select your preferred language. All prompts and Alexa will now change to your preference.
CR300IVCA – Application Instruction Manual
Using Spotify
Use your phone, tablet or computer as a remote control for Spotify.
Go to spotify.com/connect to learn how
Using Deezer
A Deezer subscription is required to use Deezer on your device.
1. Head to deezer.com/offers and sign up to start your free trial*
2. Install the Deezer app on your device.
3. Launch the Smartaudio app and on the device list page, swipe right twice.
4. Select Deezer from the options list and input your login details to launch Deezer.
5. Select your music.
6. Select the Audio option at the bottom left of the app page and then select your speaker from the devices list and start listening.
You can also ask Alexa to play your favourite music directly from your chosen music streaming service.
To do this you need to follow these steps:
1. Open the Alexa app
2. Select the menu icon in the top left corner of the app page
3. Select settings
4. Select music
5. Select Link New Service
6. Select your music service from the list.
7. Input your account details.
Once confirmed you can then use your voice to request your favourite music. i.e. Alexa, Play jazz music on Deezer or Alexa, Play music by
Queen on Spotify.
CR300IVCA – Application Instruction Manual
Setting an Alarm
You can set an alarm within the app and also choose if you want to wake with your favourite radio station or a preset music track
from your streaming service.
Select the Alarm Clock setting from the list
Then press the + icon to add a new alarm.
Select the time for your alarm
Then chose if you wish to use radio station from Tune in or a favourite track from your
presets list. See below for how to set up a preset.
Autres manuels pour CR300IVCA
1
Table des matières
Langues :
Autres manuels THOMSON Intervenants
THOMSON
THOMSON WSP 740 Manuel utilisateur
THOMSON
THOMSON WS01 Manuel utilisateur
THOMSON
THOMSON WS03 Manuel utilisateur
THOMSON
THOMSON WS01 Manuel utilisateur
THOMSON
THOMSON WS05 Manuel utilisateur
THOMSON
THOMSON CS 540 Manuel utilisateur
THOMSON
THOMSON WS600DUO Manuel utilisateur
THOMSON
THOMSON ASK 145 Manuel utilisateur
THOMSON
THOMSON ACC143 Manuel utilisateur
THOMSON
THOMSON WS502 Manuel utilisateur
THOMSON
THOMSON DS301 Manuel utilisateur
THOMSON
THOMSON CR300IVCA Manuel utilisateur
THOMSON
THOMSON WS702 Manuel utilisateur
THOMSON
THOMSON MW-1266 Manuel utilisateur
THOMSON
THOMSON WS07VCA Manuel utilisateur
THOMSON
THOMSON SB220B Manuel utilisateur
THOMSON
THOMSON WS400DUO Manuel utilisateur
THOMSON
THOMSON WS06IPB Manuel utilisateur
THOMSON
THOMSON WS03 Manuel utilisateur
THOMSON
THOMSON WS02 Series Manuel utilisateur
Manuels Intervenants populaires d'autres marques
Bowers & Wilkins
Bowers & Wilkins 4 Manuel utilisateur
Sonance
Sonance SONOS OUTDOOR Series Manuel utilisateur
Electro-Voice
Electro-Voice EVID FM4.2 Manuel utilisateur
Pioneer
Pioneer XW-HTD630 Manuel utilisateur
Onn
Onn BWA16AA002 Manuel utilisateur
HP
HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur