Fixed speed centrifuge: User’s Guide 2/7
- Version du 10/06/2020 -
Technical Definition
10/10 stainless-steel
Ø 360 mm
Height : 820 mm
Weight : 69 kg
Single Phase 220 V –550 W
1500 rounds/minute
Honey Outpu height : 310 mm
Stainless-steel basket Ø 320 mm
The fixed speed centrifuge requires minimum
manipulation.
This process dries cappings simply and quickly.
The honey coming from the centrifuge keeps all its
qualities.
Tank
Made of stainless steel and with a diameter of 360
mm and a height of 420 mm, the tank is embedded
between an aluminium shell (6) supporting the top
cover and a moulded base forming the motor drive
unit.
Its 3 large steel feet and elastic pads absorb
vibrations and provide great stability.
The unit has a stainless-steel basket with a diameter of
320 mm and a height of 340 mm (2). The top of the basket engages in a ball bearing turntable (7)
that holds it in place during rotation. The height of the plate is adjustable (8) to ensure constant
pressure. Each machine is supplied with a nylon sieve to dry the cappings.
des opercules.
Motor
- Direct drive
- Flange mounting
- Special drive axle with cone and thread
- single phase motor 220 V, 550 W
- 1500 rnds/min
SAFETY PRECAUTIONS
CAUTION : Before connecting the appliance to a power supply, make sure that your electric
installations comply with current standards (differential circuit breaker protection, earth wire,
etc.).
Check the supply voltage.
Before using the unit for the first time, clean it to remove any residual metal shavings or filings.
Make sure that the machine is secured to the ground (the machine is delivered with drilled stands
for this purpose).
The honey must not accumulate inside the centrifuge: always keep the output clear.
Always check that the inox basket is well fitted in the hexagonal drive shaft; never push hard on
the lid if it won’t close.
