2 POWERING ON
The knob located on the right side of the A-BOX in the middle
of the latch, functions as the power switch and volume
control. Turn it clockwise, the first click will power the A-
BOX on, the rest of the rotation will regulate the volume
upwards, always start with a low volume level when connecting
your audio source.
3 CONNECTING THE AUDIO SOURCE TO YOUR A-BOX
3.1 SELECTING THE AUDIO SOURCE INPUT (with certain
options only)
The source selector switch is located on the left side of the
A-BOX in between/next to the antenna(s). The amount of
settings is determined by the amount of options added to your
A-BOX. If you have a full option A-BOX, the settings from left
to right, clockwise will be as follows: 1 AUX input, 2 Guitar
input, 3 Bluetooth, 4 WiFi in the order of the most simple
input to the most advanced.
If you opted for WiFi only for example, there will be only 2
settings: 1 AUX input, 2 WiFi.
3.2 AUX INPUT
Make sure your A-BOX is switched off, then plug in the
provided minijack cable or a similar high quality audio cable
into the AUX input bus located on the left of the A-BOX,
slightly above the charge bus (do not insert the mini jack
cable into the charge bus). Then connect the audio source to
the other end of the cable. Now start playing music on a low
volume on the audio device and switch on your A-BOX, gradually
increasing the volume until the desired level is reached. When
disconnecting the audio source it is recommended to switch
your A-BOX off until it is reconnected again.
3.3 GUITAR INPUT (optional)
Make sure your A-BOX is switched off and the Guitar input is
selected with the source selector switch, then plug in your
guitar cable into the guitar input port located on the left
side of the A-BOX, slightly above the charge bus (do not
insert the guitar cable into the charge bus). Then connect the
guitar to the other end of the cable. Now make sure the volume
on your guitar is set low and switch on your A-BOX, gradually
