ThinkTouch COT238-CFK03 Manuel utilisateur
COT238-CFK03 Spec 2.0
www.cjtouch.com Sales & Technical Support:[email protected] Skype: Ada CJtouch Block B, 3rd/5th floor,Building
6,Anjia industrial park, WuLian,FengGang, DongGuan,P.R.China 523000
- 1 -
COT238 Serials Model Definitions
DongGuan CJTOUCH Electronic Co., Ltd.
PUBLISHED DATE:2016-05-28
COT238-CFK03
Projected capacitive
(PCAP) Touch Screen
VGA/DVI/HDMI
Metal Front Frame
COT238-CFK03
23.8" Industrial Open-Frame Touch Monitor
Projected Capacitive Touch screens 10points touch Water proof&Vandal proof
COT238-CFK03 Spec 2.0
www.cjtouch.com Sales & Technical Support:[email protected] Skype: Ada CJtouch Block B, 3rd/5th floor,Building
6,Anjia industrial park, WuLian,FengGang, DongGuan,P.R.China 523000
- 2 -
Safety Instructions
1. Read these safety instructions carefully.
2. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for
cleaning.
3. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible.
4. Keep this equipment away from humidity.
5. Put this equipment on a reliable surface during installation. Dropping it or letting if fall may cause damage.
6. The openings on the enclosure are for air convection. Protect the equipment from overheating. DO NOT COVER THE OPENINGS.
7. Make sure the voltage of the power source is correct before connecting the equipment to the power outlet.
8. Position the power cord so that people cannot step on it . Do not place anything over the power cord.
9. All cautions and warnings on the equipment should be noted.
10. If the equipment is not used for a long time, disconnect it from the power source to avoid damage by transient over voltage.
11. Never pour any liquid into an opening. This may cause fire or electrical shock.
12. Never open the equipment. For safety reasons, the equipment should be opened only by qualified service personnel.
13. If one of the following situations arises, get the equipment checked by service personnel:
A) The power cord or plug is damaged.
B) Liquid has penetrated into the equipment.
C) The equipment has been exposed to moisture.
D) The equipment does not work well, or you cannot get it to work according to the user’s Manuel.
E) The equipment has been dropped and damaged.
F) The equipment has obvious signs of breakage.
14. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS BELOW -10℃
OR ABOVE 50℃. THIS MAY DAMAGE THE EQUIPMENT.
COT238-CFK03 Spec 2.0
www.cjtouch.com Sales & Technical Support:[email protected] Skype: Ada CJtouch Block B, 3rd/5th floor,Building
6,Anjia industrial park, WuLian,FengGang, DongGuan,P.R.China 523000
- 3 -
1.1 Open Frame Touch Monitor Parameters
Display Specifications
Characteristic
Value
Comment
LCD Size/Type
23.8”a-Si TFT-LCD
Aspect Ratio
16:9
Active Area
Horizontal
527.04 mm
Vertical
296.46 mm
Pixel
Horizontal
0.2745
Vertical
0.2745
Panel Resolution
1920(RGB)×1080 (FHD)(60Hz)
Native
Display Color
16.7 Million
6-bits + Hi-FRC
Contrast Ratio
1000:1
Typical
Brightness
250 nits
Typical
Response Time
14 ms
Typical
Viewing Angle
Horizontal
178
Typical
Vertical
178
Video Signal Input
VGA and DVI and HDMI
Physical Specifications
Dimensions
Width
569.2 mm
Height
341.1mm
Depth
43.4mm
Weight
Net Weight 8 kgs
Shipping Weight 11 kgs
Box Dimensions
Length
665 mm
Width
490 mm
Height
215 mm
Electrical Specifications
Power Supply
DC 12V 4A
Power Adapter Included
100-240 VAC, 50-60 Hz
Plug Input
Power Consumption
Operating
38 W
Typical
Sleep
3 W
Off
1 W
Touch Screen Specifications
Touch Technology
Project Capacitive Touch Screen 10 Touch Point
Touch Interface
USB (Type B)
OS Supported
Plug and Play
Windows All (HID) ,Linux (HID) (Android Option)
Driver
Driver Offered
Environmental Specifications
Condition
Specification
Temperature
Operating
-10°C ~+ 50°C
Storage
-20°C ~ +70°C
Humidity
Operating
20% ~ 80%
Storage
10% ~ 90%
MTBF
30000 Hrs at 25°C
COT238-CFK03 Spec 2.0
www.cjtouch.com Sales & Technical Support:[email protected] Skype: Ada CJtouch Block B, 3rd/5th floor,Building
6,Anjia industrial park, WuLian,FengGang, DongGuan,P.R.China 523000
- 4 -
1.2 Components
USB Cable *1 Pcs,
VGA Cable *1 Pcs,
Power Cord with Switching Adapter *1 Pcs,
Bracket*2 Pcs
RS232 Cable & DVI Cable Sold Separately
1.3 OSD Control
1.3.1OSD buttons
1.3.2 Adjusting with OSD control
Five different keys are well-defined for operation . They are labeled on the keypad.
A) [Power] Key is designated for Power On/Off
B) [Menu] Key is designated for Menu/Enter function depending on the selected item. Pressing [Menu] can invoke OSD menu.
After that, [Menu] is also an entry key.
C) [+] key is designated for selection function in up direction in OSD menu and also to increase the value on selected
function,Directly use + Key is to increase brightness.
D) [-] key is designated for selection function in down direction in OSD menu and also to decrease the value on selected
function,Directly use - Key is to decrease brightness.
E) [AUTO] key is designated for invoking AUTO ADJUST function at any time once is pressed for H-position, V-position, Pixel
Clock and Phase for an optimal image.
COT238-CFK03 Spec 2.0
www.cjtouch.com Sales & Technical Support:[email protected] Skype: Ada CJtouch Block B, 3rd/5th floor,Building
6,Anjia industrial park, WuLian,FengGang, DongGuan,P.R.China 523000
- 5 -
1.4 Setup the driver
1. Plug and play USB port under win 7 win 8 win 10.For Andriod and Linux need using driver pls contact the sales for
support.
1.5 Warranty
1 Year Free Warranty for Monitor and all components.
1.6 Mechanical Drawing
COT238-CFK03 Spec 2.0
www.cjtouch.com Sales & Technical Support:[email protected] Skype: Ada CJtouch Block B, 3rd/5th floor,Building
6,Anjia industrial park, WuLian,FengGang, DongGuan,P.R.China 523000
- 6 -
1.7 Mounting guide
1. Build 16 screw studs along the four sides of the cut out opening based on the dimension given on the drawing above.
2.Tighten the screw stud with hex nut and make sure it is stable.
1.8 Electrical Block Diagram
The LCD touch monitor is constructed based on steel open frame architecture. It consists of a 23.8”LED panel, an DC to
AC inverter board to support a set of cold cathode fluorescent light, an analog to digital converter board (AD Board) to
convert analog RGB signals to digital ones, and a touchscreen used as a pointing device. A metal chassis supports the
whole module.
1.8.1 Block Diagram
COT238-CFK03 Spec 2.0
www.cjtouch.com Sales & Technical Support:[email protected] Skype: Ada CJtouch Block B, 3rd/5th floor,Building
6,Anjia industrial park, WuLian,FengGang, DongGuan,P.R.China 523000
- 7 -
2 Solutions to Common Problems
Problem
Suggestion(s)
The monitor does not respond after
you turn on the system
1)Check that the monitor’s Power Switch is on.
2)Turn off the power and check the monitor’s power cord and
signal cable for proper connection.
Characters on the screen are dim
Refer to the About Touch monitor Adjustments section to adjust
the brightness.
The screen is blank
1)During operation, the monitor screen may automatically turn
off as a result of the Power Saving feature. Press any key to see
if the screen reappears.
2) Refer to the About Touch monitor Adjustments section to
adjust the brightness.
Screen flashes when initialized
Turn the monitor off then turn it on again.
“Out of Range” display
Check to see if the resolution of your computer is higher than
that of the LCD display.Reconfigure the resolution of your
computer to make it less than or equal to 1920×1080. See
Appendix A for more information on resolution.
Touch doesn’t work
Make sure the touch cable is securely attached at both ends.
COT238-CFK03 Spec 2.0
www.cjtouch.com Sales & Technical Support:[email protected] Skype: Ada CJtouch Block B, 3rd/5th floor,Building
6,Anjia industrial park, WuLian,FengGang, DongGuan,P.R.China 523000
- 8 -
3 Typical Application
Gaming/Casino Systems
Outdoor and indoor Kiosks
Entertainment
Transport and Ticketing
Hospitality
Banking
Customizsed Solutions
4 How to contact us
www.cjtouch.com
Add
：
Block B, 5th floor,Building 6,
Anjia industrial park, WuLian,
FengGang, DongGuan,P.R.China
Tel
：
+86-13790303801
Sales & Marketing
：
Table des matières
