Thinkrace A20 Manuel utilisateur
A20 User Manual
Please read the instruction manual before using, in order to install SIM card
properly and use the product easily.
1.How to use:
1. Please check the ID number of this product in the label of external box; find out all
accessories inside the box.
2. Before power on: please insert GSM network Nano SIM card (Which can support
one of the network modes: GSM 850,900,1800,1900MHZ, order the caller ID function and
order monthly mobile internet traffic data from your mobile operators (it must be GPRS
traffic, not less than 30 MB/month traffic package). Please note that this product only
supports GPRS internet. There must be GPRS traffic available in the SIM card. This
locator doesn't support 3G and 4G.
3. Power on: press the power button for 3 seconds or more until power on.
4. Power off:
By the GPS watch: (1) without sim card: long press the power button above 3 seconds to
power off.
(2) with sim card: short time press the power button 10 times to power off or use
ByAPP: entering Settings—— Remote shutdown.
5.How to charge: Put the magnetic adsorption charging head on back of the GPS
watch, connect the phone charger (5V 1A output) to charge.
2. SIM card installation method
1. Unclench the lid of SIM card slot with tool 2.Insert the SIM card into the
card slot
3. Equipment parameters
Positioning: GPS satellite positioning + BeiDou positioning +AGPS auxiliary
positioning+WIFI positioning+LBS base station positioning
Device dimension：49X40X14.5mm Gross weight：52g
Battery capacity: 500mAh
Power/ SOS button
Monitoring Platform: support android phone, apple mobile phone system, computer
webpage login, etc.
4.Product function
1.Real time tracking
2.Call function
3.Historical route query
4.Geo-fence
5.Voice monitoring
6.Do not disturb mode
7.Tone Mode
8.Clock Alarm
9. Voice Talk
10.Health Step
11.Heart Rate and Blood Pressure
12.Pill Alarm
13.Sedentary Remind
14.Fall Down Alarm
15.Language and Time zone
16.Voice Timekeeping
17.Show IMEI@ID
18.Other settings and functions
5. Function declaration
5.1 Real time tracking
There are three kinds of tracking mode. User can select setting in the phone APP software
function to choose the working mode.
1. Rapid positioning (1 minute): equipment at 1 minute intervals updates location
information, we don’t suggest choosing rapid positioning model, because the battery
will be lower sooner than standard mode obviously. We don’t suggest selecting this
one.
2. Standard positioning (10 minutes): equipment updates location information
according to the time of 10 minutes interval. We suggest selecting this one.
3. Save electricity positioning (an hour): equipment in one hour time interval to
update location information, the power-saving mode use battery slowly. This one is good
for power saving.
5.2 Call function
Please set admin number (monitoring number) before the following operations
（1）Setup whitelist :Click APP setting—whitelist—setting phone numbers
（Maximum 5 contact numbers can be set, only the phone numbers in whitelist can
call this watch）.
（2）Phonebook：Click APP setting—Phonebook—Setting name, phone numbers
（Maximum 15 contact numbers can be set in the phonebook；After setting up
phonebook, can choose one contact in phonebook to initiate a call through phone
Icon button of watch home screen）.
（3）SOS emergency call
If you have set up the family number (SOS number, maximum two), the GPS
watch will dial the family number when long press power/ SOS button, If the first
number answers, it will not dial the second number. If the first family number does
not answer, it will dial the second number automatically, the GPS watch will stop
dialing after circularly dial twice.
Note: After ordering the caller ID function, it admin number or white list or phone
book or any of the family numbers are set, the watch will refuse calling from the
stranger automatically. Whitelist, phonebook and family number can be set in
completed phone number or short number. When there is SOS call from GPS watch,
if the first family mobile phone number answers the call by leaving voice message,
the watch will not dial the next family number.
5.3 Historical route query
This product will keep 3 months of route information. If two GPS positioning points are
very close to each other in the historical route data, the redundant one will be deleted
automatically.
5.4 Geo-fence
APP Geo fence—click upper- right “+”—Move circular area on map( android phone
can set circle radius by upper “ +” and “-”, IOS can set Geo fence by moving upper
icon)—Mark Geo fence name( such as family or school)—Save.(suggesting the Minimum
radius 500m)
If the watch is out from fences, mobile phone APP client-side will receive the alarm
information from GPS locator platform. Alarm information frequency is related to the
positioning interval time setting, the shorter positioning time interval, the more frequent to
detect if out of Geo-fence or not.
5.5 Voice monitoring
APP settings—voice monitoring—fill in the monitor mobile phone number—click
ok(wait for a while and then the equipment will dial your mobile phone number; you can
listen to the voice around locator after pick up your mobile phone).
5.6 Do not disturb mode
APP settings—do not disturb mode—set up do not disturb timing(Maximum four
groups timing) within the time interval, unable to call the locating watch, unable to slip the
screen.
Do not disturb mode setting is only available from Monday to Friday. The “do not disturb”
function does not work at the weekends on Saturdays and on Sundays
5.7 Call Alert Setting.
APP: Settings -> CallAlert -> Vibration+Ring/Ring/Vibration/Mute, 4 types
5.8 Clock Alarm
APP: settings—Clock Alarm—set clock alarm time (Alarm clock reminder can be
one time, daily and user-defined, can be set according to your own needs)
5.9 Voice Talk
Intercom between gps watch and app for voice conversations:
1- Send voice message or text fromAPP to GPS watch: APP voice—hold the button to
talk—release the button to send; Or send text. (Note: the maximum voice message can
be up to 15 seconds. User can swipe up finger to cancel voice recording.
2- Send voice message from GPS watch to APP: click talk icon—hold to talk—release
to send.
5.10 Health Step
How to use health step:
Step counting is default to be closed, so you need to manually turn on this function, by
following steps in APP:
From APP: Health Step—The upper- right corner setting icon—according to your need to
set time period of counting (three groups), pace and weight parameters, finally turn on the
step counter switch. You can turn off the counting function when it is not needed.
You can check the steps number in the GPS watch “step “; Can check the number of
calories and steps number of the day or historical sport route in theAPP .
5.11 Heart Rate and Blood Pressure
One time measurement: Wearing a watch, from the watch, click “heart rate blood
pressure”, then the watch will be into the measurement interface, it will display the
measurement result in about 30 seconds, and send to the server.
Timing measurement: From APP, Click “Heart rate/BP”- click the upper right corner
setting icon-Select Custom Upload-set the upload interval (not less than 5 minutes).
Note: The measured data result is displayed on the app for one-time measurement or
timing measurement both.
5.12 Take pill Alarm
From APP, Settings-PillAlarm-Set pill alarm time and reminding text( pill alarm time is
divided into single, daily and custom, can be set according to our own needs)
Note: Single means Ring once; Daily means it rings every day; custom means we can
set the bell reminding time from Monday to Sunday . The three bell reminding ways can
be set as single, daily, or custom.
5.13 Sedentary Remind
From watch: Click “Sedentary”- select open- set reminder time-save
After opening Sedentary reminder, if the watch does not detect movement during the
set time period, it will remind elderly to get up for activities.
5.14 Fall Down Alarm
From APP,Settings-Fall Alarm-Open Fall Alarm/Fall Call Alarm
Note: After turning on fall down alarm, the watch will issue an alert if falling down is
detected, if turn on call alert for falling down, the watch will also call the admin number.
User can click to stop sending alert if it is error detection.
Table des matières
Autres manuels Thinkrace Montre
