Thinkify T-200 Manuel de référence

Thinkify, LLC

Thinkify T-200 Demonstration Application

Overview and Customi ation Guide

Document Version: A

** DRAFT **

31 May 2012

Thinkify T-200 Demonstration Application

DCN-TF01024-A

About Thinkify, LLC

Thinkify, LLC is a wireless technology company speciali ing in RFID hardware and software

products. With 30 years of combined experience in RFID and over 35 patents in the field, our

founding team is one of the technically strongest in the industry.

Our focus is

embedded

RFID. -- Applications where we use RFID to enable common objects,

devices and whole environments to become aware of the world around them. This

capability can transform the way people and objects interact, blurring the line between the

physical world and the virtual.

Thinkify is a privately held company, located in Morgan Hill, California.

We feel that partnerships should be healthy and that Engineering should be beautiful.

Thinkify, LLC

18450 Technology Drive, Suite E1

Morgan Hill, CA 95037

Phone: 408.782.7111

FAX: 408.782.2111

Web: www.thinkifyit.com

Thinkify – Making things think. (tm)

Thinkify T-200 Demonstration Application

DCN-TF01024-A

Notices

Thinkify, LLC has intellectual property rights relating to technology embodied in the products

described in this document, including without limitation certain patents or patent pending

applications in the U.S. or other countries.

This document and the products to which it pertains are distributed under licenses restricting

their use, copying, distribution and decompilation. No part of this product documentation

may be reproduced in any form or by any means without the prior written consent of Thinkify,

LLC and its licensors, if any. Third party software is copyrighted and licensed from Licensors.

Thinkify, the Thinkify logo, Insight and other graphics, logos, and service names used in this

document are trademarks of Thinkify, LLC in the U.S. and other countries. All other

trademarks are the property of their respective owners. U.S. Government approval required

when exporting the product described in this documentation.

Federal Acquisitions: Commercial Software -- Government Users Subject to Standard License

Terms and Conditions. U.S. Government: If this Software is being acquired by or on behalf of

the U.S. Government or by a U.S. Government prime contractor or subcontractor (at any tier),

then the Government's rights in the Software and accompanying documentation shall be only

as set forth in this license; this is in accordance with 48 C.F.R. 227.7201 through 227.7202-4 (for

Department of Defense (DoD) acquisitions) and with 48 C.F.R. 2.101 and 12.212 (for non-DoD

acquisitions).

DOCUMENTATION IS PROVIDED “AS IS” AND ALL EXPRESS OR IMPLIED CONDITIONS,

REPRESENTATIONS AND WARANTEES, INCLUDING ANY IMPLIED WARRANTY OF

MERCHANTABILITY, FITNESS FOR APARTICULAR PURPOSE OR NON-INFRINGMENT ARE

HEREBY DISCLAIMED, EXCEPT TO THE EXTENT THATSUCH DISCLAIMERS ARE HELD TO

BE LEGALLY INVALID.

Note Regarding RF Exposure

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with

minimum distance of 20cm between the radiator (antenna) and your body. This

transmitter must not be co-located or operating in conjunction with any other antenna

or transmitter.

FCC Notice and Cautions

Any changes or modifications to this device not expressly approved by Thinkify, LLC

could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

Thinkify T-200 Demonstration Application

DCN-TF01024-A

Notices

any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Thinkify T-200 Demonstration Application

DCN-TF01024-A

Revision History

•May 2012: Initial Document Release.

Thinkify T-200 Demonstration Application

DCN-TF01024-A

Revision History

Table of Contents

About Thinkify, LLC.............................................................................................................................2

Notices.................................................................................................................................................3

Note Regarding RF Exposure........................................................................................................3

FCC Notice and Cautions..............................................................................................................3

Revision History...................................................................................................................................5

Introduction.........................................................................................................................................8

Getting Started....................................................................................................................................9

What's in the box?..........................................................................................................................9

Hooking up the hardware............................................................................................................10

Setting up the Driver (Microsoft Windows XP)..........................................................................11

Setting Up the Driver (Microsoft Windows 7)............................................................................14

Installing the Demonstration Program.......................................................................................18

Reading Tags.....................................................................................................................................20

Read Filtering....................................................................................................................................22

Extended Reads – Reading Data other than the EPC...................................................................26

Background: Class 1 Generation 2 (Gen2) Tags........................................................................26

Extended Reads............................................................................................................................26

Programming.....................................................................................................................................34

EPC Programming........................................................................................................................34

Auto Increment: ......................................................................................................................35

ASCII Mode: ............................................................................................................................35

Smart Programming: ...............................................................................................................36

General Purpose Programming..................................................................................................36

GPIO...................................................................................................................................................39

Pin Assignments...........................................................................................................................39

Triggered Reading........................................................................................................................40

Positive Level............................................................................................................................40

Negative Level..........................................................................................................................40

Positive Edge............................................................................................................................40

Negative Edge.........................................................................................................................40

Command Line Interface..................................................................................................................44

Interactive Mode...........................................................................................................................44

Macros...........................................................................................................................................45

“!” Commands.........................................................................................................................46

Keyboard Wedge..............................................................................................................................48

The Settings Tab................................................................................................................................50

The “Demos” Tab.............................................................................................................................51

Simple Image Demo....................................................................................................................52

Thinkify T-200 Demonstration Application

DCN-TF01024-A

Revision History

NXP Image Demo Using G2iL+ Configuration Word...............................................................53

NXP Config Word Demo.............................................................................................................54

Thinkify T-200 Demonstration Application

DCN-TF01024-A

Introduction

The Thinkify T-200 Demonstration Application is designed to showcase unique features of our

desktop RFID reader and to get new users quickly familiari ed with the reader's capabilities.

Using it, you can read and program Gen2 RFID Tags, examine all banks of tag memory, filter

the tags you see based on a mask of data in the tags or signal strength, take advantage of the

readers digital I/O ports and more.

Several graphical demonstrations are available that you can customi e with your own text and

images to associate tags with pictures or even web links.

Users who wish to develop their own applications will be happy to know that the

demonstration program only uses standards commands, documented in the T-200 Reader

Interface User's Guide. Anything we can do with the demonstration application, you can do

in your own applications as well.

Let's get started...

Thinkify T-200 Demonstration Application

DCN-TF01024-A

Illustration 1: The Thinkify T-200 Desktop

RFID Reader

Getting Started

Before you can use the demonstration program, you must hook up the reader and install the

Thinkify USB driver. – This driver turns the USB port that the reader is connected to into a

virtual serial port that can be accessed by our software, yours using our APIs, or a simple

terminal program.

What's in the box?

•TR200 Desktop Reader

•Antenna

•USB cable

•CD with this manual, software driver, and demonstration program

•Some sample RFID Tags

(Stone not included.)

Thinkify T-200 Demonstration Application

DCN-TF01024-A

Getting Started

Hooking up the hardware

Attach the antenna to your reader – it just screws on.

Plug the USB cable into the reader and then into your laptop or PC.

You should see the blue LEDs on the front of the reader cycle through a start up pattern and

then the one on the right should slowly blink to indicate that the unit has power and is waiting

for commands.

So much for hooking up the hardware... You're all done.

Thinkify T-200 Demonstration Application

DCN-TF01024-A

Manuels Ordinateur de bureau populaires d'autres marques

HP m9060n - Pavilion - Elite Fiche technique

Asus

Asus E210 Series Manuel utilisateur

Dell

Dell Inspiron 600m Manuel utilisateur

Dell

Dell Inspiron 3662 Manuel utilisateur

TotalFlow

TotalFlow uFLO Manuel utilisateur

HP Presario SV7000 - Desktop PC Manuel utilisateur

HP ProDesk 400 G5 Manuel

Logitech

Logitech MK320 Manuel utilisateur

Dell

Dell XPS 730 H2C Manuel utilisateur

Sony

Sony Vaio Series Manuel utilisateur

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuel utilisateur

Alto

Alto MD 250 Manuel utilisateur

Lenovo

Lenovo ThinkCentre Edge 72 Manuel

Lenovo

Lenovo ThinkStation D20 Manuel

Arbor Technology

Arbor Technology FPC-7800 Series Manuel utilisateur

Sony

Sony VAIO VGX-TP1 Series Manuel utilisateur

Asus

Asus Eee Box B204 Manuel utilisateur

Dell

Dell Optiplex 9010 All In One Manuel utilisateur