Thermo Scientific KingFisher Flex Manuel utilisateur

KingFisher

Flex

Service Manual

Version 1.1

KingFisher®Flex Thermo Fisher Scientific Service Manual

Version 1.1 Introduction 1-1

Section 1 Introduction

This manual gives technical information about instrument and explains how to maintain, test and adjust it.

Audience

Service personnel

Scope

This Manual is divided into the following sections.

Section 1 Introduction

Provides an overview of content of KingFisher®Flex service manual.

Section 2 Operating Instructions

This is a copy of user manual.

Section 3 PCB Functional Description

Section 4 Block Diagrams

Section 5 Component Layouts

Component (PCB) layout drawings

Section 6 Schematic Diagrams

Section 7 Software

Describes KingFisher®Flex software remote commands.

Section 8 Testing and Adjusting

Explains how to adjust and test the instrument.

Section 9 Maintenance Procedures

Section 10 Power Supply

Section 11 Wiring Diagrams

Section 12 Spare Parts

Section 13 Bulletins

1-2 Introduction Version 1.1

Service Manual Thermo Fisher Scientific KingFisher®Flex

KingFisher®Flex Thermo Fisher Scientific Service Manual

Version 1.1 Operating Instructions 2-1

Section 2 Operating Instructions

This section is a copy of KingFisher®Flex user manual.

2-2 Operating Instructions Version 1.1

Service Manual Thermo Fisher Scientific KingFisher®Flex

Thermo Scientific

KingFisher®Flex

User Manual - DRAFT

Rev. 1.0, Cat. no. N07669

Reproduction of the accompanying user documentation in whole or in part is prohibited.

Patents

This product is protected by the following patents:

US 6447729, Method and means for magnetic particle specific binding assay, and US 6448092, Separation

device for microparticles involving a magnetic rod.

KingFisher Flex also has national and international patents pending.

Trademarks

“KingFisher” and “Microtiter” are registered trademarks of Thermo Fisher Scientific.

All other trademarks and registered trademarks are the property of their respective holders.

Disclaimer

Thermo Fisher Scientific reserves the right to change its products and services at any time to incorporate

technological developments. This manual is subject to change without prior notice as part of a continuous

product development. Although this manual has been prepared with every precaution to ensure accuracy,

Thermo Fisher Scientific assumes no liability for any errors or omissions, nor for any damages resulting from

the application or use of this information. This manual supersedes all previous editions.

No liability for consequential damages

Thermo Fisher Scientific shall not be liable for any damages whatsoever arising out of the use or inability to

use this product.

Warranty statement

Thermo Fisher Scientific Microplate Instrumentation Business products are fully guaranteed against defective

parts and materials, including defects caused by poor workmanship, for a period of one year from the date of

delivery. Thermo Fisher Scientific will repair or replace defective parts or materials during the term of warranty

at no extra charge for materials and labor provided that the products were used and maintained in accordance

with Thermo Fisher Scientific’s instructions. The warranty is invalid if products have been misused or abused.

For the warranty to be effective, the product must have been purchased either directly from Thermo Fisher

Scientific or from an authorized Thermo Fisher Scientific distributor. The guarantee is not transferable to a

third party without prior written approval from Thermo Fisher Scientific. This guarantee is subject to the

following exclusions:

●Any defects caused by normal wear and tear.

●Defects caused by fire, lightning, flood, earthquake, explosion, sabotage, war, riot, or any other occurrence

of the type listed above.

●Refurbished products that are subject to different warranty conditions.

THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESSED OR IMPLIED WARRANTIES,

INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE. The seller is not liable for any loss or damage arising out of or

in connection with the use of the product or other indirect damages. These warranty terms and conditions can

be obtained from your local Thermo Fisher Scientific dealer.

Consumables are not included in the warranty.

Thermo Fisher Scientific Thermo Scientific KingFisher®Flex User Manual 3

About This User Manual

This user manual is written for the actual end user, for example,

research scientist or laboratory technician, and provides information on

the Thermo Scientific KingFisher Flex, including the installation and

operating instructions.

Read the manual in its entirety before operating the instrument.

This user manual is designed to give you the information to:

●Review safety precautions

●Install the KingFisher Flex

●Use the KingFisher Flex in routine jobs – the processing step

●Perform basic cleaning and maintenance procedures

●Troubleshoot the instrument performance

This user manual also describes all the features and specifications of the

KingFisher Flex hardware and onboard software. Refer to Chapter 7:

“Technical Specifications”.

In Chapter 4: “Routine Operation” you find explanations of the

processing principles and procedures and on how to use the KingFisher

Flex internal software.

In Chapter 9: “Troubleshooting Guide” you find explanations of error

and warning messages and a problem-solving guide. The user should be

familiar with the contents of Chapter 5: “Maintenance”. For ordering

information, refer to Chapter 10: “Ordering Information”.

For PC software-related issues, refer to the Thermo Scientific BindIt

Software User Manual (Cat. no. N07974).

For the latest information on products and services, visit our websites

at:

http://www.thermo.com

http://www.thermo.com/kingfisher

In an effort to produce useful and appropriate documentation, we

appreciate your comments on this user manual to your local Thermo

Fisher Scientific representative.

Intended users

How to use this

user manual

For more

information

About This User Manual

Safety symbols and markings

4Thermo Scientific KingFisher®Flex User Manual Thermo Fisher Scientific

These symbols are intended to draw your attention to particularly

important information and alert you to the presence of hazards as

indicated.

The following symbols and markings appear on the type label and the

instrument itself.

Power ON ▲

Power OFF ▲

Warning Hot surface, risk of burns. ▲

Warning Risk of body parts, hair, jewelry or clothing getting caught in

a moving part. ▲

Serial number ▲

Catalog number ▲

Date of manufacture ▲

Consult instructions for use ▲

WEEE symbol This product is required to comply with the European

Union’s Waste Electrical & Electronic Equipment (WEEE) Directive

2002/96/EC. ▲

A black label with the following text (Figure 2–4):

WARNING: DISCONNECT SUPPLY BEFORE SERVICING

AVERTISSEMENT: COUPER L'ALIMENTATION AVANT

L'ENTRETIEN ET LE DEPANNAGE

Safety symbols

and markings

Safety symbols and

markings used on the

KingFisher Flex

Autres manuels pour KingFisher Flex

Table des matières

Autres manuels Thermo Scientific Équipement de laboratoire

Thermo Scientific

Thermo Scientific Dionex Easion Manuel utilisateur

Thermo Scientific

Thermo Scientific MaxQ SHKE420HP Mode d'emploi

Thermo Scientific

Thermo Scientific Thermo Scientific SL16 Manuel utilisateur

Thermo Scientific

Thermo Scientific Locator Manuel utilisateur

Thermo Scientific

Thermo Scientific Locator Jr Manuel utilisateur

Thermo Scientific

Thermo Scientific Microm HM355S Manuel utilisateur

Thermo Scientific

Thermo Scientific iCAP 7000 Series Manuel utilisateur

Thermo Scientific

Thermo Scientific 1267 Series Manuel utilisateur

Thermo Scientific

Thermo Scientific Cryo 740 Series Manuel utilisateur

Thermo Scientific

Thermo Scientific Sorvall Legend Micro 21R Manuel utilisateur

Thermo Scientific

Thermo Scientific Dionex TCC-100 Manuel utilisateur

Thermo Scientific

Thermo Scientific Heraeus Fresco 21 Manuel utilisateur

Thermo Scientific

Thermo Scientific BioCane CK50900 Series Manuel utilisateur

Thermo Scientific

Thermo Scientific Applied Biosystems QuantStudio 6 Pro Manuel utilisateur

Thermo Scientific

Thermo Scientific CLINIConic 30 x 15 Manuel utilisateur

Thermo Scientific

Thermo Scientific Neslab EX-7 Manuel du propriétaire

Thermo Scientific

Thermo Scientific invitrogen EVOS XL Core Manuel utilisateur

Thermo Scientific

Thermo Scientific Haematocrit-Rotor 7500 3473 Manuel utilisateur

Thermo Scientific

Thermo Scientific ProPac SCX-20 Manuel utilisateur

Thermo Scientific

Thermo Scientific Applied Biosystems ProFlex PCR System Manuel utilisateur

Thermo Scientific

Thermo Scientific BRAHMS KRYPTOR compact PLUS Manuel utilisateur

Thermo Scientific

Thermo Scientific CryoStar NX70 series Manuel

Thermo Scientific

Thermo Scientific 996 Mode d'emploi

Thermo Scientific

Thermo Scientific Dionex ICS-900 Manuel utilisateur

Manuels Équipement de laboratoire populaires d'autres marques

Qiagen

Qiagen DML 3000 Manuel utilisateur

Queensgate

Queensgate NANOSCAN OP400 Manuel de programmation

Conviron

Conviron GEN1000-GE Manuel utilisateur

Parr Instrument

Parr Instrument 4560 Mode d’emploi

IKA

IKA IC control Manuel utilisateur

Integra

Integra DOSE IT Manuel utilisateur

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manuel utilisateur

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manuel utilisateur

NI PXI-5422 Manuel

Collomix

Collomix Aqix Manuel utilisateur

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuel utilisateur

Ocean Insight

Ocean Insight FLAME-NIR+ Manuel utilisateur

Parker

Parker ALIGN-MG-NA Manuel utilisateur

BD 644787 Manuel utilisateur

DENTAURUM

DENTAURUM Compact Megaplus Manuel utilisateur

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuel utilisateur

VWR

VWR SAS Super IAQ Manuel utilisateur

illumina

illumina MiSeqDx Manuel utilisateur