Thermadyne Fabricator 252i US Manuel utilisateur

CONTROL PCB REPLACEMENT INSTRUCTIONS

0-5248 Rev AB 1 May 16, 2012

Kit Componants

The following components are included in this kit.

• ControlPanelPCBAssembly

• AntiStaticStrap

• MountingScrews(4)

• Instructions

Control PCB Replacement

NOTE

This process is the same for the Fabricator and the Transmig units. Transmig is shown in these in-

structions.

1. Disconnect power from the power supply

2. Locate the anti static strap in this kit and follow instructions for proper use and ﬁt it to your body.

3. Removefour(4)ControlPanelscrews(#1).

Art # A-1

Figure1:FrontPanelScrewRemoval(Transmigshown)

ThermadyneHoldingsCorporation

Suite300,16052SwingleyRidgeRoad

St.Louis,MO63017,USA

Telephone:1-800-426-1888•Fax:1-800-535-0557

Email: [email protected]

www.thermalarc.com

Manual 0-5248

Control PCB Replacement and

Part Numbers for

Fabricator 252i US W7005381

Fabricator 252i EU W7005388

Transmig 250i W7005336

Assembly Instructions

CONTROL PCB REPLACEMENT INSTRUCTIONS

4. TiltpaneltowardyouanddisconnecttheRibbonCablebyippingthetwolockingtabsoutwardthenlifting

the harness connector from the board.

Art # A-10???

Figure2:ControlPCBAccess

5. Remove the control panel assembly and replace with the new one by reversing these procedures.

6. LocatethenewControlPanelPCBAssemblyandorientitliketheonejustremovedandattachtheribbon

cable making sure it snaps into place with both locking tabs being activated.

7. Carefullysetthecontrolpanelassemblybackintothefrontpanelandsecurewiththefourscrews.

8. Apply power to the unit and verify the control panel is working.

NOTE

Any information/calibrations previously stored are now gone. All information is now factory default

and any desired calibrations will need to be done again.

U.S. Customer Care: 800-426-1888 / FAX 800-535-0557 •Canada Customer Care: 905-827-4515 / FAX 800-588-1714 www.thermal-dynamics.com

International Customer Care: 940-381-1212 / FAX 940-483-8178

A Global Cutting & Welding Market Leader

™

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Thermadyne Système de soudage

Thermadyne

Thermadyne CE CutMaster 51 Manuel utilisateur

Thermadyne

Thermadyne Fabricator 211i Manuel utilisateur

Thermadyne

Thermadyne THERMAL ARC 130 GTS & S CC/TIG Manuel utilisateur

Thermadyne

Thermadyne Thermal Arc 400GMS CC Manuel utilisateur

Thermadyne

Thermadyne THERMAL ARC ARC-MASTER 351 Manuel utilisateur

Thermadyne

Thermadyne Thermal Arc 185TSW Manuel utilisateur

Manuels Système de soudage populaires d'autres marques

Berner

Berner PLASMACUT 54 Manuel utilisateur

Pro Spot

Pro Spot PR-155 Manuel utilisateur

Forney

Forney 210 Manuel utilisateur

Thermal Arc

Thermal Arc 400S Manuel utilisateur

Lincoln Electric

Lincoln Electric HANDYMIG 170I Manuel utilisateur

GYS

GYS PROTIG 201 AC/DC Manuel utilisateur

TAFA

TAFA 30*8B35 Manuel utilisateur

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Manuel utilisateur

ESAB

ESAB Buddy Arc 145 Manuel utilisateur

CIGWELD

CIGWELD 636804 Guide rapide

Red-D-Arc

Red-D-Arc DC-400 Manuel utilisateur

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Manuel utilisateur

Elettro

Elettro HI-MIG 3000 SYNERGIC Manuel utilisateur

WIA

WIA Weldmatic 270 CP132-2 Manuel utilisateur

Sonics

Sonics H520T Manuel utilisateur

Miller

Miller Big Blue 400D Manuel utilisateur

NewArc

NewArc RT2000 Guide de démarrage rapide

Hypertherm

Hypertherm powermax1000 Manuel utilisateur