6
How to Use the Device (°C unit) – continued
9. Press the time “ “ button until “beep” sound means the setting
has been locked (press 3 seconds). (P.5).
10. Press the temp“ “ button to select °C or °F.
11. When finish the setting and after 5 seconds the LCD will display real-
time of temperature and time. (P.6).
12. When press“ “ button the temperature figure will be flashing,
you can set the number by“ “ buttons.
13. When you press“ “ button the time figure will be flashing, you
set the number by“ “ buttons.
14. After treatment completed, press the“ON/OFF”button to switch
power OFF. (It will be turned off automatically when the time is up).
·After you have finished your treatment, unplug from the outlet.
·For normal treatment, 15 minutes on a cycle is sufficient. We
recommend a total treatment duration of about 30 minutes.
NOTE: If malfunction signal is displayed, stop use. (P.7). A symbol
will be displayed on the LCD, then the buzzer will alarm continually
for 5 seconds, and heat output will automatically shut off.
Lock
P. 5
Real-time
P. 6
Malfunction
P. 7
