
4 5
Safety Information
Safety Information
Please read these instructions carefully and keep them handy for future
reference. They contain important information which will help you get the best
from your product and ensure safe and correct installation and operation.
General Safety Information
• Keep the product and all its parts out of reach of small children.
• Do not attempt to open the product. This product does not contain any
user serviceable parts. Unauthorised handling and/or improper use of the
product could result in an electric shock or fire hazard.
• Do not use your product near emergency/intensive care medical
equipment; or during an electrical storm.
• Ensure that when you are using the product, your hands are fully dry before
connecting to charge, pressing any of the buttons or using the rotary
control.
• Do not subject this product to excessive force, shock, dust or extreme
temperatures.
Power Source
• Only use the USB charging cable that came with the product. Using an
unauthorised charging cable will invalidate your guarantee and may
irrecoverably damage the product.
• Disconnect your product from the charging cable during thunderstorms.
• Always check that you have completely switched off your product before you
change or disconnect the power supply.
• If the product will not be used for a long period of time, make sure that the
USB charging cable is disconnected.
• This product has a built integral rechargeable battery (2000mAh) that
cannot be replaced.
• Never try to dismantle the product and do not short-circuit the supply
terminals.
• Dispose of the product responsibly at a local authority household waste
recycling facility.
DO NOT dispose of this product in a fire as the battery may explode or
leak.
Safety Information
Moisture and water
• Do not use this product near water or any wet areas such as in a bathroom,
near a bath, wash bowl, kitchen sink or swimming pool.
• Do not expose this product to rain or moisture.
• Do not expose this product to dripping or splashing or place near any
objects filled with water.
• Do not leave it in low temperatures as moisture can form inside the product,
which may damage the circuit board.
Heat sources and flames
• Do not leave it in high temperatures as electronic devices and plastic parts
may warp in heat.
• Keep it away from bright sunlight or heat sources, such as a radiator or
stove.
• No naked flame sources, such as lighted candles, should be placed on or
near the product.
Ventilation
• Do not block or cover slots, holes or openings on the product by placing
on soft furnishings such as carpets, rugs or beds as these are provided for
functionality and/or ventilation to ensure safe operation of the product.