INSTALLATION
Mechanical Installation of the MEGABATTEN
The MEGABATTEN has been designed to be installable using all industry standards with regards to
batten installation. The 1.5” MEGABATTEN is listed to support a load of 30 pounds per linear foot when
supported on a maximum of 8-foot centers. The 2” MEGABATTEN is listed for 50 pounds per linear foot
when supported on a maximum of 8-foot centers.
We recommend the following hardware for a Dead Hung Batten installation.
CAUTION! PRIOR TO INSTALLATION, VERIFY WITH A STRUCTURAL ENGINEER THAT
SUPPORTING STRUCTURAL ELEMENTS ARE CAPABLE OF SUPPORTING THE MEGABATTEN AT
MAXIMUM LOAD. PLEASE ENSURE THAT RIGGING IS IN COMPLIANCE WITH LOCAL BUILDING
CODES AND SAFETY PRACTICES.
Mega-Folding Batten Clamp
Rated for 1675 Lbs, the Mega-Folding Batten Clamp is hinged for convenience and uses a single 7/16”
hex bolt to secure a light batten. It has a ½” clearance hole for rigging hardware.
Mega-Folding
Batten Clamp
Mega-Folding Batten Clamp
with threaded rod adapter.
Options available for 1/2” or
3/8” threaded rod.
Mega-Folding Batten
Clamp with 5/16” shackle
for wire rope and chain
rigging applications.
Installation using the Mega-Folding Batten Clamp
1. First, identify all rigging positions where the MEGABATTEN will be supported.
2. Assemble the Mega-Batten Clamp around the MEGABATTEN.
3. Attach the rigging hardware to the Mega-Batten Clamp.
4. Verify the orientation of the MEGABATTEN, then tighten all hardware.
