SPECIFICATIONS
The manufacturer reserves the right to change the product specification and livery according to continued
product improvements.
Spring Loaded Steel Tines
IMPORTANT INFORMATION
INTENDED USE
The product is intended for domestic gardens. This product is not intended for commercial use. Generally
acknowledged accident prevention regulations and enclosed safety instructions must be observed. Only
perform work described in these instructions for use, any other use is incorrect. The manufacturer will not
assume responsibility for damage resulting from such use.
GENERAL SAFETY INSTRUCTIONS
Read and understand the owner’s manual and
labels affixed to the product. Learn its application
and limitations as well as the specific potential
hazards. Retain these instructions for future
reference. The operator is responsible for
following the warnings & instructions in this
manual and on the product.
READ THE MACHINE MANUAL
Read the vehicle owner’s manual and vehicle
safety rules to know how to operate the vehicle
before using this equipment.
STAY ALERT
Do not operate the machine while under the
influence of drugs, alcohol, or any medication that
could affect your ability to use it properly. Do not
use this machine when you are tired or distracted
from the job at hand. Be aware of what you are
doing at all times. Use common sense.
USERS
Never allow children to operate the towing vehicle
or dethatcher. Do not allow adults to operate
without having read these instructions.
PASSENGERS
Do not allow anyone to ride or sit on the
dethatcher frame or on the towing vehicle.
BEWARE BYSTANDERS/PETS
Keep the area of operation clear of all persons,
particularly children and pets.
HANDLE WITH CARE
This dethatcher attachment has sharp tine points.
Always handle with care and wear sturdy footwear
and protective gloves when operating this
dethatcher.
AVOID DANGEROUS CONDITIONS
Make sure there is adequate surrounding
workspace. Cluttered areas invite injuries.
Keep your work area clean with sufficient light.
Keep the area around the machine clear of
obstructions, grease, oil, rubbish & other debris
which could cause persons to fall onto moving
parts.
INSPECT YOUR MACHINE
Check all bolts, nuts & screws for tightness before
each use, especially those securing guards & drive
mechanisms. Vibration during use, may cause
these to loosen. Replace damaged, missing or
failed parts before using.
Warning labels carry important information.
Replace any missing or damaged warning labels.
CRUSH AND CUT HAZARDS
Always keep your hands and feet clear from
moving parts while operating the equipment.
Always keep the work area clean and clear when
operating.
CONDITIONS
Always operate up and down a slope, never across
the face of a slope. This equipment should be
operated at reduced speed on rough terrain, along
creeks and ditches and on hillsides, to prevent
tipping and loss of control. Do not drive too close
