Thales Ezio BLE Manuel utilisateur
OPEN
1
How to pair Ezio BLE reader in Bluetooth
under Mac OS X 10.14 Mojave and up
using GBDM 3.0
OPEN
2
Pairing instructions (first time connection)
1. Ensure that Bluetooth is turned on.
2. Start the device (press on the [OK] button) and ensure the device is set in Bluetooth mode
(i.e. the Bluetooth switch is in the upper position).
3. Press on the [MENU] button followed by key [1] to enter Bluetooth pairing mode.
OPEN
3
4. Open the Bluetooth Devices Manager under Applications folder from Finder.
5. Click the No Reader from GBDM application.
OPEN
4
And go to click on Pairing, if you enable pairing on the reader and enable Bluetooth button
you should see your reader appearing in the Pairing list:
6. Click on the reader name “Ezio BT Reader XXXX” (XXXX is the last 4 digits of the S/N
number printed on the back of the device).
7. Enter the pairing code shown on the device’s display in the “Pairing code” field and click
on the [OK] button.
OPEN
5
8.You should see reader name “Ezio BT Reader XXXX” appear in “Connected to:” field:
8. Ensure that the device is listed under “Connected Reader”.
9. To allow GBDM application to start at Login and Keep it in Dock, double-click on the icon
and check “Keep in Dock” and “Open at Login” under Options:
OPEN
6
Normal Connection Mode (when the device and Mac were already paired):
1. Start the device in Bluetooth mode.
2. Verify that the device automatically enters connected state
Note: The “Bluetooth connect” message in the main display will disappear after a few
seconds.
