Texecom Impaq S Manuel utilisateur
Installation Manual
Impaq S / Impaq SC
INS877-1
INS877-1 2/20
Content
1.0 Introduction 3 ............................................................................................................................
1.1 Impaq S 3 ...............................................................................................................................
1.2 Impaq SC 5 .............................................................................................................................
2.0 Mounting 7 ..................................................................................................................................
2.1 Device mounting 7 .................................................................................................................
2.2 Magnet mounting (type SC only) 10 .......................................................................................
3.0 Wiring configuration 13 ............................................................................................................
3.1 End of Line (EOL) configuration 14 .........................................................................................
3.2 Connections 16 .......................................................................................................................
3.3 Connections - Impaq SC only 16 .............................................................................................
3.4 Optional wiring 16 ..................................................................................................................
4.0 LED functionality 16 ..................................................................................................................
5.0 Setting the shock sensitivity 17 ..............................................................................................
6.0 Specifications 18 ........................................................................................................................
7.0 Legal Information 19 .................................................................................................................
INS877-1 3/20
1.0 Introduction
The Impaq S is a wired shock sensor and the Impaq SC is a wired shock sensor with
the option for a magnetic contact.
Sections 1.1 and 1.2 show the key parts of the devices.
1.1 Impaq S
INS877-1 4/20
INS877-1 5/20
Icon Item
A LED function select DIP switch
B Sensitivity selection button
C Alarm resistance value selection DIP switch
D Tamper resistance value selection DIP switch
E Input terminal block
1.2 Impaq SC
INS877-1 6/20
INS877-1 7/20
Icon Item
A LED function select DIP switch
B Sensitivity selection button
C Magnet sensor
D Alarm resistance value selection DIP switch
E Tamper resistance value selection DIP switch
F Input terminal block
2.0 Mounting
2.1 Device mounting
Select the intended mounting position. The device can be installed in any
mounting orientation.
Open the device cover and remove the PCB using a screwdriver (see figure 1)
Remove the cable knockouts (see figure 2)
To ensure product compliance with EN50131, fix the base onto the
mounting surface (see figure 3) using the following screw type:
Head Type: Counter Sunk flat head
Head Diameter: 5.3-6.8mm
Screw Diameter 2.9-3.2mm
Screw length: 15.8-24.5mm
NOTE 1: If the product is mounted on concrete suitable wall plugs should be used.
NOTE 2: If installing the Impaq SC the same screw types should be used to mount
the magnet.
Figure 1
INS877-1 8/20
Figure 2
INS877-1 9/20
Figure 3
INS877-1 10/20
2.2 Magnet mounting (type SC only)
Once the device has been mounted, position the magnet so the notch is
aligned with the arrow marker on the PCB.
The magnet can be installed on either side of the device. Greater sensitivity
is achieved by positioning the magnet so the notch is aligned with the arrow
(see figure 4 for magnet distances).
Figure 4
Autres manuels pour Impaq S
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Texecom Accessoires
