TESTO 875i Guide de référence

Autres manuels pour 875i

3

Autres manuels TESTO Caméra thermique

Manuels Caméra thermique populaires d'autres marques

Hikmicro

Hikmicro B20 Manuel utilisateur

FLIR

FLIR E-EST Series Manuel utilisateur

FLIR

FLIR M-Series Manuel utilisateur

BST

BST BT-72 Manuel utilisateur

FLIR

FLIR G300 pt Series Manuel utilisateur

CBC

CBC EN7-S02T Manuel utilisateur

Satir

Satir YRH600 Manuel utilisateur

TECPEL

TECPEL TIG-320 Manuel utilisateur

SKF

SKF TKTI 21 Manuel utilisateur

InfiRay

InfiRay AT300 Series Manuel utilisateur

InfiRay

InfiRay AT Series Manuel utilisateur

FLIR

FLIR X6530sc Series Manuel utilisateur

Videotec

Videotec MAXIMUS MVXT Manuel utilisateur

Guide Sensmart

Guide Sensmart D384M Manuel utilisateur

NBN

NBN FLIR A6 Series Manuel utilisateur

WORKSWELL

WORKSWELL SAFETIS Manuel utilisateur

Major tech

Major tech MTi11 Manuel utilisateur

COHU

COHU 5935-1000/T100 Manuel utilisateur

Brief instructions en

testo 875i · Thermal imager

Contact

GREAT BRITAIN / IRELAND

Testo Ltd.

Alton, Hampshire GU34 2QJ

Tel. (14 20) 54 44 33, Fax (14 20) 54 44

E-mail: [email protected]

USA

Testo Inc.

Flanders, NJ. 07836

Tel. (973) 2 52 17 20, Fax (973) 2 52 17 29

E-mail: [email protected]

AUSTRALIA

Testo Pty Ltd

Croydon South VIC 3136

Tel. (3) 98 00 46 77, Fax (3) 98 00 46 99

E-mail: [email protected]

The most up-to-date address details of our subsidiaries and

agencies can be found in Internet at: www.testo.com

Changing assignment of the quick

select buttons

Change the left or right quick select button:

1Call up: Move Joystick ➀to the left or right.

2Navigate: Move Joystick up / down.

3Confirm: Press [OK] ➀.

or

Cancel: Press [Esc] ➁.

Getting to know the quick select

buttons

Using the quick select buttons, the set functions are

called up directly. Factory settings:

❯Left quick select button ➀: Adjust scaling.

❯Right quick select button ➁: Select image type.

Warning! Eye damage due to laser beam.

❯Do not look into the laser beam and do not point

the laser beam at people.

Building inspection

Electrical maintenance work

Mechanical maintenance

0971 8754 en 01 V01.00 en

➀

➁

Scale… Image type

➀

➁

Image type

Palette

Emissivity...

Scale...

Adjustment

Recording the image

1Freeze image: Press trigger button ➁once.

2Save image: Press trigger button again.

or

Discard image: Press [Esc] ➀.

Getting to know the menu

1Open menu: Press [OK] ➀.

2Navigate: Move Joystick ➀up / down.

3Open submenu (only for menu points marked

with ): Move joystick to the right.

4Call up a function: Press [OK].

or

Exit menu: Press [Esc] ➁.

Focusing the picture

❯Turn lens ➀by hand.

Switching on / off

❯Remove protection cap ➀from the lens.

❯Switch on: Press [ ] ➁.

- The measurement view is opened after the warm-

up period.

- The thermal imager performs an automatic

zeroing approx. every 60 sec. This can be

recognized by a “click”. The image is frozen

briefly when this occurs.

❯Switch off: Press [ ] again.

➆

➅

➂

➃

Apply

➄

➁

➀

➀

➁

➀

➀

➁

➀

➁

Measurement

Image gallery

Scale...

Display...

Emissivity...

Palette

Configuration

Commissioning

1Push the rechargeable battery ➀all the way

into the rechargeable battery slot until this is flush

with the bottom of the handle.

- The thermal imager starts automatically.

2Remove protective film from the display ➁.

- Instrument language (Language) and temperature

unit (Unit) can be set:

3Move Joystick ➂up / down to select the desired

option.

4Press [OK] ➂.

5Move Joystick up / down to change the setting.

6Press [OK].

7Press [Apply] ➃function key to apply the

settings.

8Press []➄ to switch off the thermal imager.

9Connect mains unit ()➅.

10 Completely charge battery (3 hours).

11 Insert Memory card in the card slot (SD) ➆.

- The camera is now ready for operation.