Quick-Start Operating Guide
High- CleanBooth™ Laminar Flow Station
© Copyright 2020 Terra Universal Inc. All rights reserved • Revised May 2020 • Document No. 1800-73v2.0tm
Terra Universal, Inc. • TerraUniversal.com • 800 S. Raymond Ave. • Fullerton, CA 92831 • TEL: (714) 578-6000 • FAX: (714) 578-6020 3
1. Introduction
This manual provides information on installing and
operating your Terra Universal Cleanbooth™ Laminar
Flow Station.
By studying this document carefully, you can be assured
of a long, efficient service life from the unit.
2. Description
Terra Universal's CleanBooth Laminar Flow Work Station
removes airborne particulate contamination to ensure a
clean work surface.
The backbone of the system is one or more fan filter units
(FFUs), each with a 3-speed, direct-drive electric motor
that forces air through a HEPA filter. The HEPA filter
removes 99.99% of all particles 0.3 microns and larger
from a large-volume air stream. The vertical laminar flow
of clean air to the work surface effectively blocks the
inrush of contaminants. Each 2' x 4' fan filter unit provides
an average of 644 CFM of filtered air @ 90 FPM (2' x 3'
units deliver 477 CFM). For more stringent cleanliness
requirements, ULPA-filtered units are available that
remove particles down to 0.12 microns with 99.999% efficiency.
Flexible anti-static vinyl curtains are available to enclose the work area. These curtains mount to the FFU support
stand by means of a flexible GripTrack™ system.
System options include fluorescent lighting and ionizing bars – see maintenance descriptions below.
This manual pertains to proprietary devices manufactured by Terra
Universal, Inc. Neither this document nor any portion of it may be
reproduced in any way without prior written permission from Terra
Terra Universal makes no warranties applying to information contained
in this manual or its suitability for any implied or inferred purpose.
Terra Universal shall not be held liable for any errors this manual
contains or for any damages that result from its use.
A thorough familiarity with all operating guidelines is essential to safe
operation of the product. Failure to observe safety precautions could
result in poor performance, damage to the system or other property, or
serious bodily injury or death.
The following symbols are intended to call your attention to two levels
of hazard involved in operation:
Cautions are used when failure to observe instructions
could result in significant damage to equipment.
Warnings are used when failure to observe instructions
or precautions could result in injury or death.
The information presented here is subject to change without notice.
