Terex Genie AL6-6000 Manuel utilisateur
Operator's Manual
A
L
6
-6000 AUS
Australia
A
L
6
-9000
with
Maintenance
Information
First Edition
First Printing
Part No. 1254860
Operator's Manual First Edition • First Printing
AL6-6000 • AL6-9000 Part No. 1254860
FrontMatter
Contents
Introduction ........................................................... 1
Symbol and Hazard Pictorials Definitions............. 5
General Safety ...................................................... 7
Work Area Safety.................................................. 9
Legend ................................................................ 15
Controls............................................................... 16
Inspections.......................................................... 19
Operating Instructions......................................... 30
Transport and Lifting Instructions ....................... 36
Maintenance ....................................................... 39
Specifications...................................................... 42
Copyright © 2014 Terex Corporation
First Edition: First Printing, January 2014
“Terex” is a registered trademark of Terex USA, LLC in the
USA and many other countries.
These machines comply with the Motor Vehicles Standard Act
1989
First Edition • First Printing Operator's Manual
Introduction
Part No. 1254860 AL6-6000 • AL6-9000 1
Introducti on
About this manual
Genie appreciates your choice of our machine for
your application. Our number one priority is user
safety, which is best achieved by our joint efforts.
This book is an operation and daily maintenance
manual for the user or operator of a Genie
machine.
This manual should be considered a permanent
part of your machine and should remain with the
machine at all times. If you have any questions,
contact Genie.
Product Identification
The machine serial number is located on the serial
label.
Intended Use
This machine is intended to be used only to
provide lighting and electrical power to a work site.
Bulletin Distribution and
Compliance
Safety of product users is of paramount
importance to Genie. Various bulletins are used by
Genie to communicate important safety and
product information to dealers and machine
owners.
The information contained in the bulletins is tied to
specific machines using the machine model and
serial number.
Distribution of bulletins is based on the most
current owner on record along with their
associated dealer, so it is important to register your
machine and keep your contact information up to
date.
To ensure safety of personnel and the reliable
continued operation of your machine, be sure to
comply with the action indicated in a respective
bulletin.
serial label
Operator's Manual First Edition • First Printing
Introduction
2 AL6-6000 • AL6-9000 Part No. 1254860
Contacting the Manufacturer
At times it may be necessary to contact Genie.
When you do, be ready to supply the model
number and serial number of your machine, along
with your name and contact information. At
minimum, Genie should be contacted for:
Accident reporting
Questions regarding product applications and
safety
Standards and regulatory compliance information
Current owner updates, such as changes in
machine ownership or changes in your contact
information. See Transfer of Ownership, below.
Transfer of Machine Ownership
Taking a few minutes to update owner information
will ensure that you receive important safety,
maintenance and operating information that
applies to your machine.
Please register your machine by visiting us on the
web at www.genieindustries.com.au or by calling
us toll free at 1800 788 633.
First Edition • First Printing Operator's Manual
Introduction
Part No. 1254860 AL6-6000 • AL6-9000 3
Danger
Failure to obey the instructions and
safety rules in this manual will result
in death or serious injury.
Do Not Operate Unless:
You learn and practice the principles of safe
machine operation contained in this operator’s
manual.
1 Avoid hazardous situations.
Know and understand the safety rules
before going on to the next section.
2 Always perform a pre-operation inspection.
3 Always perform function tests prior to use.
4 Inspect the workplace.
5 Only use the machine as it was intended.
You read, understand and obey the
manufacturer’s instructions and safety
rules—safety and operator’s manuals and
machine decals.
You read, understand and obey employer’s
safety rules and worksite regulations.
You read, understand and obey all applicable
governmental regulations.
You are properly trained to safely operate the
machine.
Operator's Manual First Edition • First Printing
Introduction
4 AL6-6000 • AL6-9000 Part No. 1254860
Hazard Classification
Decals on this machine use symbols, color coding
and signal words to identify the following:
Safety alert symbol—used to alert
you to potential personal injury
hazards. Obey all safety
messages that follow this symbol
to avoid possible injury or death.
Indicates a hazardous situation
which, if not avoided, will result in
death or serious injury.
Indicates a hazardous situation
which, if not avoided, could result
in death or serious injury.
Indicates a hazardous situation
which, if not avoided, could result
in minor or moderate injury.
Indicates a property damage
message.
Safety Sign Maintenance
Replace any missing or damaged safety signs.
Keep operator safety in mind at all times. Use mild
soap and water to clean safety signs. Do not use
solvent-based cleaners because they may damage
the safety sign material.
DANGER
WARNING
CAUTION
NOTICE
First Edition • First Printing Operator's Manual
Symbol and Hazard Pictorials Definitions
Part No. 1254860 AL6-6000 • AL6-9000 5
Symbol and Hazard P ictorials Definiti ons
Read the operator’s
manual
Electrocution hazard Stop engine Earth ground Electrocution hazard
Maintain required
clearance
Explosion / Burn
hazard
Disconnect battery
Read the service
manual
Keep away from
moving parts
Keep away from
moving parts
Burn hazard Stay clear of hot
exhaust
Burn hazard Explosion / Burn
hazard
Corrosive acid.
Crush hazard Keep clear of
outriggers and tires
No smoking No flame No flame
Tip-over hazard Towing instructions Tip-over hazard Raising tower
instructions
Tie-down point
P
P
P
P
Operator's Manual First Edition • First Printing
Symbol and Hazard Pictorials Definitions
6 AL6-6000 • AL6-9000 Part No. 1254860
Burn hazard, hot
components
Stay clear of hot
surfaces under cover
Carbon Monoxide
hazard
Wear protective
clothing
Shattering glass
hazard
Lifting point
First Edition • First Printing Operator's Manual
General Safety
Part No. 1254860 AL6-6000 • AL6-9000 7
General Safety
114258
133148
114431
133483
T108022
1251981
T108022
T108021
1251967
1251976
12519761251976
133148
114431
114258
133483
T108022
T108021
1251981
1251967
1251976
Operator's Manual First Edition • First Printing
General Safety
8 AL6-6000 • AL6-9000 Part No. 1254860
28161
133148
133012
31788
1251971
1251981
133148
1251970
97666
28236
133483
114431
133148
114431
133483
28161
28236
1251970
1251981
1251971
31788
133012
1251980
1251980
97666
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Terex Générateur portable
