Teplo T002 Manuel utilisateur
P.1
teplo
Connected Teapot
Instructions for Use
teplo is a smart teapot which enables a personalized tea brewing experience.
teplo measures your heartrate, finger temperature, and environment conditions
using built in sensors. teplo then adjusts brewing temperature and time based
on your personal information in order to brew tea ideally suited to you.
Please read all instructions carefully before operating the teplo teapot.
Contents
- Know your teplo・・・・・・・ P.2
- Display・・・・・・・ P.3
- Before first use of your teplo・・・・・・・ P.4
- Operating your teplo・・・・・・・ P.8
- Children・・・・・・・ P.11
- Additional Features・・・・・・・ P.11
- Care and Cleaning・・・・・・・ P.12
- Additional Warnings・・・・・・・ P.13
- Damage/Repair・・・・・・・ P.13
- Storage・・・・・・・ P.14
- Customers Service・・・・・・・ P.14
- Regulatory Notices・・・・・・・ P.14
- Warranty・・・・・・・ P.15
P.2
Know your teplo
Lid
Infuser Unit
Shaft
Tab
Bearing
Infuser Mesh
Weight Holder
Infuser Weight
Glass Pot
Handle
Spout
Glass Pot
Connector
Magnet
Magnet Holder
Maximum water
350ml
Mesh Holder
P.3
Display
The LED display located on the Power Base changes color to indicate status.
LED Display
Status
Yellow blinking
Stand by with no BLE connection with mobile app
Blue blinking
Ready to start pairing via BLE
White blinking
Stand by after BLE connection with mobile app
White
Waiting for the function button to be pressed, to start
brewing
Green blinking
Brewing
Green
Brewing complete
Red
Error
Power Button
LED
Sensors
Function Button
Base Connector
Base Arm
Power Connector
Power Base
Power Plug
Power Cord
P.4
Before first use of your teplo
Download teplo app from app store.
! iOS device download link: http://teplotea.com/iosapp
! Android device download link: http://teplotea.com/androidapp
Preparing teplo for use:
We have a guided experience on the app on how to use the teplo. Setup your
teplo with the app.
1. Remove and safely discard packing material, packing tape and labels.
2. Remove the Glass Pot, Lid, and the Infuser Unit. Wash the Lid, Infuser Unit
and the inside of the Glass Pot in warm soapy water with a soft sponge, rinse
and dry thoroughly.
WARNING: To protect against fire, electric shock and injury do not
immerse Power Cord, Plug, Power Base, or the base of the Glass Pot in
water.
How to lock and unlock the Lid:
・Open
Slide the knob and rotate the Lid to
counterclockwise to unlock the Lid.
Lift the Lid to open.
WARNING: Do not use water to
clean the base of the Glass Pot.
Close the Lid and rotate the Lid to
clockwise to lock the Lid.
・ Close
P.5
How to attach and detach the infuser units:
・Attach
・Detach
Push the magnet part of the
infuser and remove from the
hook.
Hold the plastic part of the infuser
mesh and rotate the infuser mesh to
clockwise to open the infuser.
Hold the plastic part of the infuser mesh
and rotate the infuser mesh to clockwise.
Make sure the infuser mesh is attached
and locked to the infuser weight.
Insert the shaft of the infuser to the
bearing and push the other side of the
infuser to the hook.
P.6
3. Place the Power Base on a flat, dry surface.
4. Unwind the Power Cord completely, insert the power cord into the Power
Base, and insert the Power Plug into a grounded wall outlet. Always unwind
Power Cord fully before use.
NOTE: Remove and safely discard the protective cover on the Power Plug.
NOTE: Always attach plug to the Power Base first, then plug Power Cord
into the wall outlet. To disconnect, turn power off, then remove plug from
wall outlet.
WARNING: The power cord is equipped with a three prong grounding
plug. To reduce the risk of electrical shock teplo must be grounded using
a properly grounded 3-hole outlet.
5. After the base LED is turned off, single press the power button.
6. Pair teplo with the teplo app by opening the teplo app and following the
instruction on the mobile app for paring setup.
7. Clean your teplo without tea by combining the Infuser weight and the infuser
mesh, and securely attaching the Infuser to the Lid.
P.7
8. Fill the Glass Pot to maximum water line (350mL WATER MAX) and place on
the Power Base. Securely fit the Lid onto the Glass Pot.
WARNING: Over-filling the Glass Pot above the '350' line may result in
injuries and/or damage to teplo as a result of overflowing hot or boiling
water. Filling below the '150' line will result in teplo switching off before
the water has boiled or reached the selected temperature.
9. Follow the instruction on the mobile app to complete the test operation.
10. Discard the water after completing the test operation.
WARNING: Never touch the Infuser weight, Infuser mesh or the Glass
Pot until they are cooled after brewing. Touching these items before
cooling can cause serious burns or injuries.
11. Rinse the Glass Pot and Infuser and dry thoroughly.
12. teplo is now ready to use. Use the mobile app to enjoy your first brew.
P.8
Operating your teplo
1. Remove the Glass Pot from the Power Base, then remove Lid. When brewing
tea, fill with desired amount of water. Make sure to fill the Glass Pot with water
between ʻ150ʼ line and ʻ350ʼ line. If the Glass Pot is hot, allow to cool before
filling with water.
NOTE: Do not operate teplo without water. Doing so may cause breakage
of the glassware.
WARNING: Over-filling the Glass Pot above the '350' line may result in
injuries and/or damage to teplo as a result of overflowing hot or boiling
water.
2. Place the Infuser on a flat, dry surface. Put desired amount of tea leaves into
the Infuser weight and attach the Infuser mesh. *If using teplo teas, put all the
tea leaves in the packet. Teplo tea packets contain the exact amount of teas for
a single brew. For best experience use teplo teas.
P.9
3. Attach the Infuser to the Lid.
4. Attach the Lid securely to the Glass Pot and place the Glass Pot on the Power
base.
NOTE: Do not place objects on top of the Lid.
WARNING: Do not open the Lid during operation as scalding may
occur.
NOTE: When in operation, keep teplo a minimum of 8 inches (20cm) from
walls and other objects.
WARNING: - The Glass Pot must be used only with the Power Base
supplied. Do not use the Glass Pot on a stove or range top.
P.10
5. Press the Power button on the Power Base and open the mobile app.
6. Follow the instruction on the mobile app to brew your tea.
7. teplo automatically adjusts the water temperature and the Infuser will
automatically rotate to start and stop brewing.
8. The Infuser will stop rotating when teplo completes brewing.
NOTE: Use caution when removing the Glass Pot containing hot liquid
from the Power Base.
WARNING: Do not remove the Glass Pot from the Power Base during
heating or when the basket is in operation. Ensure that the tea brewing
cycle is complete before removing the Glass Pot from the Power Base.
Table des matières
