Tenways Thermopad Manuel utilisateur
ThermoPad
User Manual
2
Please read these instructions carefully and take care to use this equipment correctly. Store these instructions
safely for future reference.
Be sure to pass these instructions and the corresponding installation instructions to anyone subsequently
appointed to maintain this equipment. Installation and relocation of this equipment should be carried out by
qualified persons only. Attempts by end users to install or move this equipment may lead to unsafe conditions or
improper operation.
CONTENTS
1. Safety Precautions
………………………………………………………………………………………..
3
2. LCD Description –Parts Names
………………………………………………………………………………………..
4
3. ON/OFF Settings
………………………………………………………………………………………..
7
4. Setting the Temperature
………………………………………………………………………………………..
8
5. Setting the Fan Speed
………………………………………………………………………………………..
9
6. Setting the Operation Mode
………………………………………………………………………………………..
10
7. Setting the Current Date and Time
………………………………………………………………………………………..
11
8. Setting the Sleep Timer
………………………………………………………………………………………..
14
9. Setting the Weekly Schedule Timer
………………………………………………………………………………………..
16
3
1. SAFETY PRECAUTIONS
Thank You for purchasing the ThermoPad
Read this manual carefully and be sure you understand the information provided before attempting to use the
product
Keep this manual where it is readily accessible after reading it through. If another user operates the product in the
future, be sure to hand over this manual to the new user
Do not install the ThermoPad by yourself, consult a qualified engineer
Do not relocate or reinstall the ThermoPad by yourself, consult a qualified engineer
Do not touch the ThermoPad with wet hands
Do not use the ThermoPad in extreme environment (places exposed to oils, steam, excess sun)
Do not press any button using a sharp object ( a ball pen is acceptable)
Do not wash the ThermoPad.
Never Let the ThermoPad get wet.
Do not clean the ThermoPad with benzene, thinner or other chemicals
Do not modify or repair the ThermoPad
Do not use flammable materials (e.g., hairspray or insecticide) near the product.
Do not disassemble the ThermoPad
4
2. LCD Description –Parts Names
5
1
ON/OFF Button
Press the ON/OFF button to start or stop the system
2
Modbus Communication Indicator
3
Schedule Timer Icon
Indicates that a Timer is enabled
4
Set Temperature Display
Shows the Set Temperature
5
Day of the Week Indicator
Shows the current day of the week (or the set day when programming the
schedule timer)
SUN MON TUE
WED THU FRY SAT
6
Clock Display
Indicates the current time (or the set time when programming the schedule
timer)
7
Timer Indicator
“SLEEP TIMER” –Single Instance Timer Setup
“TIMER” –Weekly Schedule Setup
SLEEP
TIMER
8
Minimum / Maximum Temperature
Used to program Temperature restrictions (currently not in use)
MIN MAX
9
Room Temperature
Indicates the Room Temperature
10
MENU Button
Used to Enter Setting Mode for Date, Time, Sleep Timer, Schedule Timer
etc.
Is displayed when touch next to Navigation Button
CANCEL Button
Touch to SAVE and EXIT
11
Navigation Buttons UP/DOWN
Used to adjust Operation Mode, Temperature Set point, Date and Time
6
12
ON / OFF Settings
Used while setting the timers to activate/deactivate the Timers
Timer Active
Timer NOT Active
13
Swing Option Button
14
Setup Indicators
Displayed is some Setup Modes
SETTINGS WAIT CLEANING
15
Sound on/off indication (currently not in use)
16
Currently not in use
17
Malfunction indication
8888
18
Fan speed button
Indicates the Fan Speed Settings, touch to change
(Low, Medium, High & Auto)
19
Operation Mode Icon
Indicates the current operation Mode
(Cool, Heat, Dry, Automatic, Auxiliary Heating & Fan)
7
3. ON / OFF SETTINGS
When the ThermoPad is switched OFF, the screen will display the ON/OFF Button, Schedule Timer, Room
Temperature, Day of the week and Time.
NOTE: In OFF Mode, if the Clock display, Room
Temperature and Schedule Timer are Disabled, the
Screen will show only the ON/OFF Button
Press the ON/OFF Button to switch the unit ON or OFF
8
4. SETTING THE TEMPERATURE
To change the Set Temperature use the Navigation Buttons
To raise the Room Temperature press
To lower the Room Temperature press
The set temperature changes 1oC each time the button is
pressed
When the Button is held down, the Set Temperature
advances or reswitchs continuosly.
A characteristic BEEP sound will support every touch.
9
5. SETTING THE FAN SPEED
Depending on the Type of Air Conditioning, ThermoPad allows
selection of up to 4 Fan Speed settings: Low, Medium, High &
Auto.
To change the Fan Speed use the Fan Speed Button
Fan Speed LOW
Fan Speed MEDIUM
Fan Speed HIGH
Fan Speed AUTO
10
6. SETTING THE OPERATION MODE
Depending on the Type of system, ThermoPad allows to select up to five Operation Mode functions: COOL,
HEAT, AUTO, DRY, HAUX & FAN
To select / change the Operation Mode press the
OPERATION MODE Icon. The OPERATION MODE
Screen will display .
The Operation Mode Screen display will be active for 3
secons after which will return to Default Mode.
Using the NAVIGATION BUTTONS Choose the Operation
Mode Desired
COOL Cooling Operation Mode
HEAT Heating Operation Mode
DRY Dry Operation Mode
AUTO Automatic Operation Mode
HAUX Auxiliary Heating Operation Mode
FAN Fan Operation Mode
NOTE: If the NAVIGATION BUTTONS are not used within 3 seconds, the screen will return to the Default Mode
Table des matières
