TENNEY ENVIRONMENTAL
INSTALLATIONINSTRUCTIONS
READ THE FOLLOWINGCOMPLETELYBEFOREATTEMPTINGTO INSTALLOR
OPERATE THE EQUIPMENT.
IMPORTANT!
--
FOR ALL MODELS EXCEPTBTS. BTC. T6S. T6C
CAUTION: TO SAFELY SECURETHE REFRIGERATIONSYSTEM COMPRESSORS AND
PIPING DURING SHIPPING, WOODEN BLOCKS HAVE BEENINSTALLEDUNDERNEATH
THE COMPRESSORS. THESE BLOCKS MUST
BE
REMOVEDBEFORE OPERATION!
SERIOUSDAMAGEMAY RESULT IFNOT REMOVED1
ON COMPRESSORS WlTH SPRiNG$lOaNTS ONLY, YOU MUSTLOOSENTHE
COMPRESSOR HOLD DOWN NUTS JUST ENOUGHTO REMOVE THE BLOCKS. DO NOT
LOOSENNUT BEYOND TOP OF BOLT.
ON COMPRESSORSWlTH
RUBEER~OUNTS
ONLY, JUST SIMPLY SLIDETHE WOODEN
BLOCK OUT. DO NOT LOOSENANY NUTS.
DELIVERY: Inspectequipment and shipping crate immediatelyuponreceipt. If any damage is
apparent, please contact the transportationcompany immediately. Retain all shippingmaterials
for inspection. Any claims for damage muststart at the receivingpoint. Check packingslip
carefully and make sure allmaterials have been receivedas indicatedon the packingticket.
Unless othewise noted, YOUR ORDER HAS BEENSHIPPED COMPLETE.
CAUTION!
Benchtopandreach-inchambers shouldbe handledand transported inan
upright position. Itmustnot becarriedon its back, front, orany side.
lmpo?tanfi Doto the vibration incurredduring shipping and handling, it is possiblethat
mechanicalconnections such as water fittings may become loose. For chambers with a water
cooled refrigerationsystem, check all water fittings to make sure they are t~ght.
GENERAL INFORMATION: Your equipment has beenfully operated, tested. and balancedin
our plant priorto shipment.Make sure the chamber is leveledwhenset up. Many times control
panels are removed to facilitate shipment. Replacementusually involves repositioningpanels
on the equipment mechanicallyand reconnectionOf numberedwires to matchingnumbered
terminalblocks. The chamber should be installedin an area where there is goodair ventilation,
especially if anair-cooledcondenser isused. Allow a minimumof
12
inches between any wall
and chamber side.
AIR SUPPLY CONNECTION(S): Your chamber may haveone or more air supply connections
which may includecompressed air, purged air, or other. Please check your chamber
specifications for completedetails. Make sure all air supplies are clean and that all connections
are secure.
GN,
I
LN,
I
CO, CONNECTION(S): Your chambermay requirea supply of GN,, LN,, or CO,.
Please check your chamberspecificationsfor completedetails. Makesure all connections are
secure.