Tenergy T320 Manuel utilisateur
POWER
STATION
USER GUIDE
PN 59148
CHARGE ME NOW
Before using or storing, plug your Tenergy T320 unit
into the wall until it is fully charged.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
When using this product, basic precautions should always be
followed, including the following:
Read all the instructions before using the product.
To reduce the risk of injury, close supervision is neces-
sary when the product is used near children.
Do not put ngers or hands into the product.
Use of an attachment not recommended or sold by power
pack manufacturer may result in a risk of re, electric
shock, or injury to persons.
To reduce risk of damage to the electric plug and cord,
pull the plug rather than the cord when disconnecting the
power pack.
Do not use a battery pack or appliance that is damaged
or modied. Damaged or modied batteries may exhibit
unpredictable behavior resulting in re, explosion or risk
of injury.
Do not operate the power pack with a damaged cord or
plug, or a damaged output cable.
Do not disassemble the power pack; take it to a qualied
service person when service or repair is required.
Incorrect reassembly may result in a risk of re or electric
shock.
To reduce the risk of electric shock, unplug the power pack
from the outlet before attempting any instructed servicing.
When charging the internal battery, work in a well ventilated
area and do not restrict ventilation in any way.
Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs, ush
with water. If liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause irritation or
burns.
Do not expose a power pack to re or excessive temperature.
Exposure to re or temperature above 130°C may cause
explosion. The temperature of 130°C can be replaced by the
temperature of 265°F.
Have servicing performed by a qualied repair person using
only identical replacement parts. This will ensure that the
safety of the product is maintained.
SAVE THESE INSTRUCTIONS
a)
h)
i)
j)
k)
l)
m)
b)
c)
d)
e)
f)
g)
TABLE OF CONTENTS
WHAT’S IN THE BOX
GET TO KNOW YOUR UNIT
HOW IT WORKS
CHARGING YOUR UNIT
USING YOUR UNIT
STORAGE & MAINTENANCE
TECHNICAL SPECIFICATIONS
FAQS & TROUBLESHOOTING
WARRANTY
CONTACT US
1
1
2
3
4
8
8
9
11
12
1
1. LED light button 5. Input port 9. USB ports
2. LED light 6. LCD screen 10. AC outlets
3. 12V,10A DC output 7. DC power button 11. USB-C port
4. 12V, 8A DC outputs 8. AC power button
1
2
3
4
5
6
7
8
9
10
11
WHAT’S IN THE BOX GET TO KNOW YOUR UNIT
Car Charger
Tenergy T320
Wall Charger
3 WAYS TO RECHARGE WHAT IT POWERS
AC Adapter
8 hours
Car Charger
10 hours
60W Solar Panel
7 hours*
*Solar panel sold separately. Actual charging
time varies, depending on weather conditions
and degree of excellence of sunlight reception.
Phone
30 Charges
Mini Cooler (60W)
22 Hours
Laptop
4-5 Charges
Lamp (9W)
35 Hours
Tablet
9 Charges
Game Console
20 Hours
Drone (Large)
5 Charges
LED Light (Built-in)
85 Hours
Camera
20 Charges
Speaker
20 Charges
(Models may vary)
2
Charge through solar panel (sold separately)
Place your solar panel where it can get the most strong direct sunlight. Connect the solar panel's output port with
the T320's input port. The LCD display will indicate when the power station is being recharged.
MPPT technology:
With MPPT (maximum power point tracking) technology, T320 tracks the max wattage provided by solar power
and becomes more efcient at converting energy into power to recharge the power station.
Charge through AC adapter
Connect your T320 unit to the wall outlet with the AC adapter that comes with your portable power station
packaging. The LCD display will indicate when the power station is being recharged.
Charge through your car
Connect your T320 unit to your 12V car cigarette lighter socket with the car charger that comes with your portable
power station packaging. The LCD display will indicate when the power station is being recharged.
CHARGING YOUR UNIT
3
Powering AC applications
Press the AC power button to turn on AC power
output, The AC power button will light up to indicate
that enabled.
WARNING:
Ensure that the total wattage of all AC devices
simultaneously plugged into the AC outlets not
exceed 200 watts. If overloading occurs, please
remove the overloaded application, and press the
power button to reset the unit.
USING YOUR UNIT
Connect your AC application to the T320.1
2
3Press the AC power button again to shut off AC output.
4
USING YOUR UNIT
Powering DC applications
Connect your DC application to the T320 via any of the
DC output ports (USB, USB-C, DC socket, car port)
that ts your application connector.
Press the DC power button to enable DC power
output, you’ll know it’s enabled by seeing the DC
power button light up.
Press the DC power button again to shut off the DC
output.
1
2
3
5
USING YOUR UNIT
Using the built-in LED light
Press the light button once to turn on the built-in LED
light. Press the button again to turn it off.
Press and hold the light button to output lights in a
SOS distress pattern and to signal danger to others.
Press the button again to turn it off.
1
2
NOTE:
The LED light is powered by DC power, so when the LED light is on, the DC
power button will be turned on to indicate DC power being activated.
Pressing the DC power when LED light is on, will deactivate the LED light.
Abnormal Output Warning
This icon indicates the power draw for the output ports
is more than the power station can supply. Please
unplug an application to balance the load again.
Temperature Warning
This icon indicates that the power station is overheating.
Please take actions to cool the unit off. Such as unplug-
ging and stopping all devices drawing power, or moving
the power station to a cooler shady location.
LCD display
Battery
Percentage Total Input
Wattage
Charge
Status
Total Output
Wattage
Abnormal
Output Warning Temperature
Warning
6
Ce manuel convient aux modèles suivants
1
Table des matières
Langues :
