TendyStar N2 Manuel utilisateur

User s Guide

Bluetooth Headset

TENDYSTAR

Bluetooth Headset

TENDYSTAR

MODEL : N2

Introduction ····································································2

Headset features ···························································3

Charging ········································································4

Wearing the headset ·····················································4

Using the headset

·To turn the headset on ····················································5

·Turning the headset off ···················································5

·Pairing the headset ·························································6

·Making a call ··································································6

·Redial the last number ····················································7

·Voice Dialling ··································································7

·Ending a call····································································7

·Answering a call ······························································7

·Adjusting the volume ·······················································8

·Transferring a call from the Headset to the device ············8

·Transferring a call from the device to the Headset ············8

·How to change the housing ·············································8

Limited Warranty·····························································9

Disclaimer·····································································10

Contents

Introduction

The N2 headset is a wireless headset based on Bluetooth

technology.

Bluetooth technology is a standard for wireless short distance

radio communications. Devices such as a headset and a mobile

phone or PDA, can communicate with each other without wires

over a distance of approximately 10 meters.

The N2 is a Bluetooth headset that supports two profiles:

The Headset profile and the Hands-Free profile.

It will work with any qualified Bluetooth device that supports

the Headset profile or the Hands-Free profile. The N2 headset can

be used with a qualified Bluetooth mobile phone or PDA*

(*) or another Bluetooth device supporting the Headset or Hands-Free profile.

This user guide focuses on the use of this Bluetooth headset with a Bluetooth

mobile phone.

Your N2 will allow you to receive and make a call,

adjust volume, without touching your mobile device.

Bluetooth is a trademark owned by Bluetooth SIG, Inc.

and is used by the manufacturer under its license term.

All brand names are the property of their respective owners.

Headset features Charging / Wearing the headset

3 4

In the package

N2 Charging cable Housings User’s guide

Volume down

Ear hook

Talk/Power button

Charging connector

Microphone

Volume up

When you receive your headset

the battery will not be completely

charged.

Before using the headset for the

first time you should fully charge

the battery with the supplied

charger.

Charging

You can put on the N2 Bluetooth

headset either on your left or right ear.

To change ear, hold the headset firmly

and pull the ear hook away from the post

on the back of the unit. Turn the ear hook

over and replace on the small post.

To wear the headset:

extend the ear hook then slip it over the top of your

ear, manoeuvre the speaker gently into your ear,

squeeze the ear hook closed until the headset is

held securely on your ear.

Wearing the headset

Using the headset

5 6

Press and hold the Talk button for 2~3 seconds, then the

indicator light flashes according to the status of headset.

(LED indication to check status.)

To turn the headset on

Press and hold the Talk button for 5 seconds, the indicator light

stops flashing.

Turning the headset off

Dial a phone number on the mobile device's keypad.

Press the Send/Call key.

The call will automatically be transferred to the headset

by pressing the Talk button.

Making a call

Before you use Bluetooth devices, some informations such as

Bluetooth address, pass code should be registered to both

devices you are going to use. This process is called pairing.

Once you have paired two devices, you don't need to do this

again until you want to use the headset with another device.

1. When you turn on, the headset is basically in waiting status.

Press and hold the Volume Up/Down buttons at the same time until the

headset light rapidly flashes.

2. Now, the headset is in pairing mode.

3. With your mobile device, search for headset as instructed in the device's

user guide.

4. Enter the headset passkey of 0000.

5. The N2 Bluetooth headset will now be ready to use with your mobile device.

Pairing the headset

LED indications

Headset Status LED indication

Pairable v-v-v-v-v-v-v-v-v

Not Connected ----v----v----v----v

Connected vvvv-vvvv-vvvv-

Audio Connected vvvvvvvvvvvvvvv

v:light on, -:light out

Using the headset

7 8

When not in a call, press the Talk button until you hear

the first beep.

Redial the last number

Ensure the headset is on and paired with a mobile device.

Voice tags must have been recorded.

When not in a call, press and hold the Talk button for a second

until you hear the second beep, and say one of your recorded

voice tags.

The device will dial the number associated with the voice tag.

Voice Dialling

To end a call, press the Talk button during a call.

Ending a call

Once you hear an incoming call ring in the headset press

the Talk button.

Answering a call

During a call press the Volume up or Volume down button

to increase or decrease the volume. A beep will be heard

for each step.

Adjusting the volume

Refer to your device's user manual.

Transferring a call from the Headset to the device

During a call press the Talk button.

Transferring a call from the device to the Headset

You can pull out the existing

housing from the groove at the

top of the headset.

Then, fix the included different

colored housing into the headset

unit from the upper gap to the

side & lower gap in a row.

How to change the housing

Limited Warranty Disclaimer

910

1. This product was produced under strict quality management

and inspection.

2. All defective units within the applicable Warranty period/s will be

repaired or replaced, in the case those faulty goods were handled

normally.

3. To get Warranty service, return the unit to the outlet from which

the unit was purchased.

4. Fill in this Warranty card and keep it.

5. Free of charge Warranty shall not apply to :

-Defects or damage resulting from use of the unit in other than its normal

and intended manner, eg, in excess of their maximum specifications

or operating instructions.

-Defects or damage from misuse, accident, neglect, improper testing,installation,

alteration or modification of any kind, or spillage of food or liquid.

Products name : Model number :

Purchased date: Warranty period : 1year

Outlet the unit was purchased :

Tel :

Customer Address:

Name :

Tel :

MODEL : N2

The headset described in this guide is approved to be compliant with the

Bluetooth Specification and its profiles.

is a trademark owned by Bluetooth SIG.

All brand names are the property of their respective owners.

FCC NOTICE TO USERS : FCC ID TNNN2

< NOTICE >

Section 15.19 Labelling requirements

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference and

(2) This device must accept any interference received, including interference

that may cause undesired operation.

Section 15.21 Information to user

The changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

IMPORTANT NOTE: To comply with the FCC RF exposure compliance

requirements, no change to the antenna or the device is permitted. Any change

to the antenna or the device could result in the device exceeding the RF

exposure requirements and void user's authority to operate the device.

Table des matières

Autres manuels TendyStar casque

TendyStar

TendyStar TDS-801 Manuel utilisateur

Manuels casque populaires d'autres marques

Sena

Sena SMH10 Manuel utilisateur

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manuel utilisateur

Sennheiser

Sennheiser EPOS ADAPT 230 Manuel utilisateur

Doro

Doro Flexus HS2005 Manuel utilisateur

GE 98971 Manuel utilisateur

Hama

Hama 00184070 Manuel utilisateur

Plantronics

Plantronics Blackwire 3200 Series Manuel utilisateur

Blue Tiger

Blue Tiger Advantage PLUS Manuel utilisateur

Jawbone

Jawbone Icon Manuel utilisateur

Jabra

Jabra FR 20 Manuel utilisateur

Roxcore

Roxcore Flow A+ Manuel utilisateur

Turtle Beach

Turtle Beach XP 510 Manuel utilisateur

Philips

Philips SHB6101 Manuel utilisateur

Jabra

Jabra PRO 9460 Duo Manuel utilisateur

HyperX

HyperX HyperX Cloud Flight Manuel utilisateur

Bose

Bose MIE2 Mobile Manuel utilisateur

Jabra

Jabra Steel Manuel utilisateur

HyperX

HyperX cloud ii Manuel utilisateur